This standard specifies the dimensions and tolerances of resistance spot welding electrode joints when the electrode joint is connected to the electrode cap with a convex cone (see JB/T 3948) and the electrode taper fit complies with JB/T 3957. JB/T 10255-2001 Resistance welding equipment - Electrode joints, external taper 1:10 Part 1 Conical fit, taper 1:10 JB/T10255-2001 Standard download decompression password: www.bzxz.net

ICS 75.160.30
Mechanical Industry Standard of the People's Republic of China
JB/T 10255—2001
idtISO5183-1:1998
Resistance welding equipment
Part 1
Electrode adaptors, malc taper, external taper 1:10
Cone fit, taper: 10
Resistance welding equipment-Electrode adaptors, malc taper 1:10 Part 1: Conical fixing, taper 1:10 Issued on 2001-05-23
China Machinery Industry Federation
Implemented on 2001-10-01
JB/T10255-2001
This standard is equivalent to 1S05183-1:1998 <Outer terminal of resistance welding equipment, outer dimension 1:11 Part 1, example taper,
Chain dimension 1:103. This standard is the first to be formulated. Appendix A and Appendix B of this standard are informative appendices. This standard was proposed and approved by the National Electric Welding Machine Standardization Technical Committee. The drafting unit of this standard: Chengdu Electric Welding Machine Research Institute. The main drafters of this standard: Ying, Jihong. JB/T10255-2001
ISO Foreword
The International Organization for Standardization (ISO) is a worldwide alliance of national standardization bodies (15 bodies). The formulation of international standards is usually carried out through ISO technical committees. The professional bodies interested in a certain professional field for which a technical committee has been established have the right to participate in the committee: official and non-official international organizations in contact with ISO also participate in this work. ISO works closely with the International Electrotechnical Commission (IEC) in the standardization of electrotechnical technology. The draft international standards adopted by the committee are circulated to the member bodies for voting, and at least 5% of the member bodies are required to vote for them when they are published as international standards.
International Standard T505183-1 was developed by the 6th Subcommittee of the IS0/C11/SC6 Technical Committee for Constant and Similar Processes, "Welding".
International Standard IS05=83 consists of the following parts, with the general title: Resistance welding equipment-Electrode adaptorsy male taper l:1uPart 1:Cnnical fixing, taper The negative A and appendix of this standard are based on the appendix. Machinery Industry Standard of the People's Republic of China
Resistance welding equipment-Electrode adaptorsy male taper l:1uPart1:Cnnical fixing, taper 1:101 Scope
JB/T1U255—2001
idt1505183-1:1998
This standard specifies the electrode connector with convex braid to connect the electrode phase (see J3/3943), the electrode chain with the corresponding electrode [B/T3957 standard called, the size and tolerance of the middle resistance point terminal and the electrode side head, 2 Reference standards
The provisions contained in the following standards have become the provisions of this standard through reference in this standard. At the time of publication of the standard, the versions shown are All standards will be revised. All parties using this standard should discuss the possibility of using the following standards as the latest version: JB/3948-1999 Resistance spot welding electrodes (eqV150521: 1979) JB/14231-1999 Materials for resistance welding electrodes and accessories (20VIS05182: 1591) 3 Dimensions
The dimensions of the connector should comply with the relevant provisions in Figure 1 and Tables 1 and 2. 4
The connectors specified in this standard should be marked in order The following contents shall be marked: a) Name (Φ "spot welding electrode joint"); b) This standard replaces FB/T10255;
Self-electrode joint symbol:
d) Straight box:
el Length L, m-
F) Electrode joint manufacturing material (should comply with B4281), for example: light -6mm, length L=58m, material 2/1 A-type spot welding electrode joint, should be marked as: spot electrode joint H/T10255·A-1658-2/1.6 Materials
The materials used to make the joints shall comply with the provisions of JB/T1281. It is recommended to use Group 2 materials. 6. Note
All self-acting dials that meet the requirements of this standard shall be marked according to the marking method and internal marking specified in Article 4, but do not include those with names similar to standard codes, such as:
True-16×58
Approved by China Electrical Equipment Industry Federation on May 23, 2001 and implemented on October 1, 2001
Measurement reference surface
JB/T 10255—2001
A type: connector with cooling holes on one side
Blue right direction
Quantity tax collection standard
Snow card
H type: connector with cooling holes on both sides
Electrical modification
C) Core type: connector with cooling holes on both sides, the length of the connector is the maximum standard diameter at the surface
Let: Type A and Type B electrical connectors are recommended to comply with the requirements of JB/T10256.1 and JB/T10256.2 standards. The front electrodes are tightened together. C-type electrode connector is used for the measurement coordination under the conditions of JB/3957.
Room 1--Electrode connector
2) The number in the resistance code is 1. When
, the value of the current base is
2) The value of the model number is
JB/r10255—2001
Table 1 Dimensions of type 1 and type B electrode connectors
Table 2 Dimensions of type C electrode connectors 1.1 mmbzxz.net
JR/T102552001
(Standard attachment)
Plane dimensions
If the terminal joint is designed to be flat so that the joint can be unscrewed with a wrench, the dimensions of the plane b and (see Figure 1) should be selected according to the table, 1.1 mm
Figure 1-1 Flat joint
1 side dimensions
JB/T 10255—2001
(Appendix to the suggestion]
References
Spot welding electrode lithium degree matching dimensions (eVIS010E9: 180JB/T 3957—1999
3Resistance spot welding electric shuttle joint, external degree [: 1F Part 2: End capture cylindrical shank matching IS0 5183-2: 1988
JB/T 10256.1-2001
Electrode rod for electric spot welding Part 1: Matching dimensions 120 (euIS08430-1: 1988JB/T1C256.2-2001Resistance spot welding-Electrode rod Part 2: Mohs Vian matching 1:10 (0gVIS09430-2: 1988)5
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.