Kilogram-force per square centimetre and megapascal conversion tables
Basic Information
Standard ID:
GB/T 4113-1983
Standard Name:Kilogram-force per square centimetre and megapascal conversion tables
Chinese Name:
千克力每平方厘米与兆帕斯卡的相互换算表
Standard category:National Standard (GB)
state:Abolished
Date of Release1983-01-02
Date of Implementation:1984-10-01
Date of Expiration:2005-10-14
standard classification number
Standard ICS number:01.060.10
Standard Classification Number:General>>Measurement>>A51 Quantity and Unit
associated standards
Publication information
other information
Release date:1983-12-26
Review date:2004-10-14
Drafting unit:National Bureau of Metrology
Focal point unit:National Technical Committee for Standardization of Quantities and Units
Publishing department:National Standardization Administration
competent authority:National Standardization Administration
Introduction to standards:
GB/T 4113-1983 Conversion table between kilogram force per square centimeter and megapascal GB/T4113-1983 standard download decompression password: www.bzxz.net
Some standard content:
1 Introduction
National Standard of the People's Republic of China
Kilogram-force per square centimetre and megapascal conversion tables bzxZ.net
UDC531.78.081
GB4113-83
1.1 This standard applies to all occasions where kilogram-force per square centimetre (kgf/cm2) is converted into megapascal (MPa) and megapascal is converted into kilogram-force per square centimetre.
The conversion tables in this standard are limited to general conversions. The converted figures in the conversion tables are rounded to five significant figures in accordance with the provisions of GB1.1-81, and the figures below 1 are rounded to four decimal places. If necessary, calculation and rounding shall be carried out according to the conversion factors given in 1.2. The rounding rules shall be in accordance with the provisions of GB1.1-81 (see Appendix A of GB4116-83). 1.2 Conversion factor:
1kgf/cm2-0.0980665MPa
1MPa=1/0.0980665kgf/cm2
Wherein, 1MPa=10°Pa.
1.3 "Kilogram-force per square centimeter" is also called "engineering atmospheric pressure". The conversion between it and "bar" can be obtained by substituting the relationship "1bar=10°Pa=0.1MPa" into the given conversion factor. 2 Conversion table
Published by the National Bureau of Standards on December 26, 1983
Implemented on October 1, 1984
kgf/cm2
kgf/cm
GB4113—83
Table 1 Conversion table of kilogram-force per square centimeter to megapascal 1kgf/cm2=0.0980665MPa
kgf/cm||tt| |kgf/cm2
GB4113—83
Continued Table 1
kgf/cm2
GB4113—83
Conversion table 2 from megapascal to kilogram-force per square centimeter
1MPa=1/0.0980665kgf/cm
kgf/cm
GB4113—83
Continued Table 2
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.