This standard specifies the types of climate protection for mechanical products used in plateau areas above 1000m above sea level, as well as the requirements for their environmental conditions, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, etc. This standard does not apply to products used in plateau areas with chemical corrosive media, explosive hazardous media, mines, and other special environmental conditions. GB/T 14093.3-1993 Environmental Technical Requirements for Mechanical Products for Plateau Environments GB/T14093.3-1993 Standard Download Decompression Password: www.bzxz.net
This standard specifies the types of climate protection for mechanical products used in plateau areas above 1000m above sea level, as well as the requirements for their environmental conditions, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, etc. This standard does not apply to products used in plateau areas with chemical corrosive media, explosive hazardous media, mines, and other special environmental conditions.

National Standard of the People's Republic of China
Environmental technical requirements of machinery products for plateau environment1 Subject content and scope of application
GB/T14093. 393
This standard specifies the climate protection types and environmental conditions of use, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage and other requirements of machinery products (hereinafter referred to as products) used in plateau areas above 1000m above sea level. The major categories of products include agricultural machinery and lifting and transportation machinery, general machinery, engineering machinery, electrical products, instruments and meters, internal combustion engines, boilers, machine tools and general parts.
This standard does not apply to products used in special environmental conditions such as chemical corrosive media, explosive dangerous media and mines in plateau areas. 2 Reference standards
GB4797.1 Natural environmental conditions for electrical and electronic products: temperature and humidity GB4797.3 Natural environmental conditions for electrical and electronic products: biology GB4798.1 Application environmental conditions for electrical and electronic products: storage GB4798.2 Application environmental conditions for electrical and electronic products: transportation GB4798.3 Application environmental conditions for electrical and electronic products: fixed use in weather-protected locations
GB4798.4 Application environmental conditions for electrical and electronic products: fixed use in weather-free locations GB2423.1 Basic environmental test procedures for electrical and electronic products: test A: low temperature test method GB2423.5 Basic environmental test procedures for electrical and electronic products: test Ea: impact test piece method GB2423.10 Basic environmental test procedures for electrical and electronic products GB2423.21
GH 2423.22
GB 2423.24
Basic environmental testing regulations for electrical and electronic productsBasic environmental testing regulations for electrical and electronic productsBasic environmental testing regulations for electrical and electronic productsGB2423.25
GB 2423. 37
CB3511
GB4208Www.bzxZ.net
GB 4768
Basic environmental testing regulations for electrical and electronic productsBasic environmental testing regulations for electrical and electronic productsRubber atmospheric test force method
Classification of enclosure protection levels
Technical requirements for mildew-proof packaging
Rust-proof packaging
GB4879
GB5018
GB7350
GB 9174
Moisture-proof packaging
Technical conditions for waterproof packaging
General technical conditions for general cargo transport packaging Insulation coordination of high-voltage power transmission and transformation equipment
Approved by the State Bureau of Technical Supervision on December 28, 1993 Test Fc: Vibration (sinusoidal) test method Test M Low pressure test method
Test N: Temperature change test method
Test Sa, simulated solar radiation test method on the ground Test 2/AM: Low temperature/low air combined test method Test 2/AFc: Low temperature/vibration (sinusoidal) combined test method Test L: Sand and dust test method
Implemented on October 1, 1994
GB/T 14093.3—93
GB/T14092.3 Environmental conditions for mechanical products High altitude GB/T14093.1 Environmental technical requirements for mechanical products For hot environments GB/T14093.2 Environmental technical requirements for mechanical products For cold environments 3 Product protection types and their environmental conditions 3.1 my country's plateau area is vast, with large altitude differences, and low air pressure has different effects on products, so the plateau area is divided into 5 levels according to the altitude: 1000, 2000, 3000, 4000 and 5000m. 3.2 The protection type of the product refers to the corresponding protective measures taken when the product is used in certain areas of the plateau, so as to ensure the adaptability of the product in the typical environment and the product type designed and manufactured. The product protection type can be divided into 4 types according to the altitude. The models are: product protection type for areas with an altitude of 1000m or less, according to the basic product protection type, the model of plateau product protection type suitable for areas with an altitude of 2000m or less is: G1; the model of plateau product protection type suitable for areas with an altitude of 3000m or less is: G2; the model of plateau product protection type suitable for areas with an altitude of 4000m or less is: G3; the model of plateau product protection type suitable for areas with an altitude of 5000m or less is: G4. 3.3 The environmental conditions for the use of the product shall be in accordance with GB4798.3, GH4798.4, GH/T14092.3, and these standards should be referred to when using. The severity levels of the selected conditions are listed in 3.4 and 3.5. The types of environmental conditions include: plateau climate conditions (Kp), special climate conditions (Zh - thermal radiation, Za - ambient air movement, Zw - other water sources except for water), biological conditions (B), chemically active substance conditions (C), mechanically active substance conditions (S) and mechanical conditions.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.