HG/T 2408-1992 Kraft Paper Pressure Sensitive Adhesive Tape HG/T2408-1992 Standard Download Decompression Password: www.bzxz.net

Chemical Industry Standard of the People's Republic of China
HG/T2408-92
Kraft Paper Pressure-Sensitive Adhesive Tape
Published on October 22, 1992
Ministry of Chemical Industry of the People's Republic of China
All kinds of standard industry information can be downloaded for free from the standard projection network mm.b22oza-com. It was implemented on July 1, 1993
Chemical Industry Standard of the People's Republic of China
Kraft Paper Pressure-Sensitive Adhesive Tape
HG/T2408-92
1 Subject Content and Scope of Application
This standard specifies the product classification, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of kraft paper pressure-sensitive adhesive tape.
This standard is only applicable to roll kraft paper pressure-sensitive adhesive tape (hereinafter referred to as adhesive tape) with kraft paper as the base material, pressure-sensitive adhesive coated on the front side and anti-adhesive material coated on the back side. The adhesive tape is mainly used for carton packaging. 2 Reference standards
GB455.1 Determination of paper tearing strength
GB_1214
Vernier caliper
Determination of 180° peel strength of pressure-sensitive adhesive tapeGB2792
Test method for holding adhesiveness of pressure-sensitive adhesive tape
GB4851
Inclined rolling ball method
Test method for initial adhesion of pressure-sensitive adhesive tape
GB4852
GB7753 Test method for tensile properties of pressure-sensitive adhesive tapeJJG1 Steel ruler
3 Product classification
3.1 Adhesive tape specifications
The adhesive tape specifications should comply with Table 1 stipulates,
Basic size
Limit deviation
Note: Special specifications are agreed upon by the supply and demand parties
Approved by the Ministry of Chemical Industry of the People's Republic of China on October 22, 1992
Basic size
Standards mw.bzaoao.cco Various standards Industry family science free download line Simple core inner diameter
Limit deviation
Implementation on July 1, 1993
3.2 Adhesive tape code
HG/T2408-92
Kraft paper pressure-sensitive adhesive tape is represented by the code KP (kraft paper) adhesive tape. 3.3 Adhesive tape marking example
KP adhesive tape
Technical requirements
4.1 Appearance
HG/T2408
Standard code
-Specification (width 60mm, length 50m)
Product name
The adhesive tape is not allowed to damage the substrate or tear after unwinding. 4.1.1 Superior products: Both sides are flat and smooth, without gaps, deformation, overflow of glue, and joints. 4.1.2 First-class products: Both sides are relatively flat, with slight gaps, deformation and overflow of glue. One joint is allowed. 4.1.3 Qualified products: No serious gaps, deformations and overflow of glue. 50m long adhesive tape is allowed to have two joints. 4.2 Physical properties
The physical properties of the adhesive tape shall comply with the provisions of Table 2. Table 2
Before aging
After heat and humidity aging
Maintenance of adhesion, min
Initial adhesion
180° tear strength N/m
Steel ball diameter, mm
Steel ball number
Tensile strength (longitudinal), kN/m
Tear strength (transverse), N
5 Test method
5.1 Measurement of specifications and dimensions
5.1.1 Width
Superior product
First-class product
Qualified product
Use a vernier caliper that meets the requirements of GB1214 to measure 3 places on the width of the adhesive tape at approximately equal intervals, and take the arithmetic mean. 5.1.2 Length and joints
Use a steel ruler that meets the requirements of JG1 to measure after unwinding the adhesive tape on a flat surface, and check the number of joints. 5.1.3 Inner diameter of the core
Use a vernier caliper to measure three locations on the inner diameter of the core at roughly equal intervals and calculate the arithmetic mean. 5.2 Appearance
5.2.1 Check the appearance by visual inspection and touch.
Standard Jiehuan.com mm.baoao.cn Various standards Industry Laws Free Download HG/T2408-92
5.2.2 Unwind the adhesive tape at a speed of about 300mm/s to check whether the substrate is damaged or torn. 5.3180° peel strength test
Perform according to the provisions of GB-2792
5.4 Wet heat aging test
5.4.1 Place the adhesive tape in a test box with a temperature of 65±2℃ and a relative humidity of (80±5)% for 48h. 5.:4.2 Carry out in accordance with the requirements of Chapter 6 of GB7753. 5.4.3 Prepare 5 samples in accordance with the requirements of Articles 6.1 to 6.2 of GB2792. 5.4.4 Perform the measurement in accordance with 5.3.
5.5 Continued adhesion test
Carry out in accordance with the provisions of GB4851
5.6 Initial adhesion test
Carry out in accordance with the provisions of GB4852.
5.7 Tensile strength test
Carry out in accordance with the provisions of GB7753.
5.8 Tear test
Carry out in accordance with the provisions of GB455.1.
6 Inspection rules
6.1 Products must be inspected and qualified by the quality inspection department of the manufacturer according to the items specified in this standard, and the certificate of conformity must be issued before they can leave the factory. 6.2 Product grade assessment
Only when the appearance, size and physical properties are qualified or meet the requirements of the corresponding grade can it be determined as a product of that grade. 6.3 Inspection classification
Inspection is divided into factory inspection and type inspection. 6.3.1 Factory inspection
6.3.1.1 Factory inspection items
Appearance;
Width, length, inner diameter of tube core;
180 peel strength before aging;
Maintenance adhesion;
Initial adhesion;
Tensile strength.
6.3.1.2 Factory inspection batching and sampling rules a.
The shift production or one-time delivery quantity is a batch, and at least 6 boxes are randomly selected from each batch of products. At least 10 rolls are sampled from each box for appearance and size inspection. Physical performance inspection: At least 2 rolls shall be sampled from each box. 6.3.1.3 Factory inspection judgment rules
During size inspection, if the number of unqualified rolls exceeds 10% of the total number of sample rolls, double samples are allowed to be sampled from the batch of products for re-inspection of unqualified items. If more than 10% of the sample rolls are unqualified, the batch of products shall be unqualified. During appearance inspection, if the number of sample rolls that do not meet the corresponding grade exceeds 10% of the total number of sample rolls, double samples are allowed to be sampled from the batch of products for re-inspection of unqualified items. If 10% of the sample rolls do not meet the corresponding grade regulations, the batch of products shall be downgraded or unqualified.
c. During physical performance inspection, if any item of 1 roll does not meet the corresponding grade regulations, double samples are allowed to be sampled for re-inspection of the item. If there is still 1 roll that does not meet the corresponding grade regulations, the batch of products shall be downgraded or unqualified. 3
Standard Jiezhao structure bzzoso.ccm Free download of relevant standard industry data 6.3.2 Type inspection
HG/T2408-92
6.3.2.1 All technical requirements specified in the standard shall be inspected. 6.3.2.2 The 180° peel strength and tear strength after wet heat aging shall be inspected at least once a year. During the inspection, 2 rolls from 6 boxes shall be randomly selected as samples. If 1 roll does not meet the requirements of the corresponding grade, 12 boxes shall be selected again, and 4 rolls shall be selected as samples for re-inspection of the two items. If there is still 1 roll that does not meet the requirements of the corresponding grade, the product during this period shall be downgraded or unqualified. 6.4 Acceptance and arbitration
The user has the right to request acceptance of product quality according to this standard. When the user has objections to the product quality, the quality supervision agency agreed by both parties shall conduct arbitration according to this standard. 7 Marking, packaging, transportation, storage
7.1 Marking
Each box of adhesive tape shall have the following markings:
Name and address of the production unit;
Adhesive tape mark, product quality grade;
Registered trademark;
Quantity, weight;
Production date or production batch number;
Anti-pressure, moisture-proof, sun-proof and other markings;
Expiration date.
7.2 Packaging
The product packaging adopts corrugated paper boxes, and isolation paper shall be placed between the upper and lower layers, with packing list and certificate of conformity attached. Special packaging forms and packing requirements shall be in accordance with the provisions of the supply contract.
7.3 Transportation
The product should be handled with care during transportation to prevent squeezing, and should not be mixed with volatile solvents. 7.4 Storage
7.4.1 The product should be stored in a warehouse with a temperature of -5 to 40°C and a relative humidity below 80% without volatile solvents. 7.4.2 It is not allowed to be directly stacked on a damp ground, and the bottom box should not be deformed. 7.4.3 The product storage period is 1 year from the date of production. Additional remarks:
This standard is proposed by the Science and Technology Department of the Ministry of Chemical Industry of the People's Republic of China. This standard is under the jurisdiction of Shanghai Rubber Products Research Institute. This standard is drafted by Shanghai Rubber Products Research Institute, Beijing Stationery Factory, and Jiangsu Lianshui Plastic General Factory. The main drafters of this standard are Shen Jun, Han Feng, Shao Congdong, and Jin Haomu. The standard is proposed by the m.basoeo.ccm website. All kinds of standard industry materials are free to download. People's Republic of China
Chemical Industry Standards
Kraft Paper Pressure-Sensitive Adhesive Tape
HG/T2408-92
Chemical Industry Standards Editorial Department
(Chemical Industry Standards Editorial Department Standardization Research Institute of Ministry of Industry)
Postal code: 100013
Printing Standardization Research Institute of Ministry of Industry
Copyright reserved. No reproduction allowed
5 sheets. Number of words: 8000
Format: 880×12301/16
First edition in March 1993
First printing in March 1993
Number of prints: 1-500bzxZ.net
Standard Technology Network ms.bzaouo:.com Free download of various standard industry materials
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.