title>GB 3776.4-1983 Determination of benzene insoluble matter in pesticide emulsifiers - GB 3776.4-1983 - Chinese standardNet - bzxz.net
Home > GB > GB 3776.4-1983 Determination of benzene insoluble matter in pesticide emulsifiers
GB 3776.4-1983 Determination of benzene insoluble matter in pesticide emulsifiers

Basic Information

Standard ID: GB 3776.4-1983

Standard Name: Determination of benzene insoluble matter in pesticide emulsifiers

Chinese Name: 农药乳化剂苯不溶物测定方法

Standard category:National Standard (GB)

state:Abolished

Date of Release1983-06-15

Date of Implementation:1984-06-01

Date of Expiration:2005-10-14

standard classification number

Standard ICS number:Agriculture>>65.100 Pesticides and other agricultural chemical products

Standard Classification Number:Chemical Industry>>Fertilizers, Pesticides>>G23 Basic Standards and General Methods for Pesticides

associated standards

Publication information

other information

Review date:2004-10-14

drafter:Zhang Junzhi, Tao Deming

Drafting unit:Nanjing Zhongshan Chemical Plant

Focal point unit:Technology of Shenyang Research Institute of Chemical Industry, Ministry of Chemical Industry

Proposing unit:Ministry of Chemical Industry of the People's Republic of China

Publishing department:National Bureau of Standards

competent authority:China Petroleum and Chemical Industry Association

Introduction to standards:

GB 3776.4-1983 Determination of benzene insoluble matter in pesticide emulsifiers GB3776.4-1983 standard download decompression password: www.bzxz.net

Some standard content:

Scope of application
National Standard of the People's Republic of China
Method of benzene-insoluble substancesdetermination for pesticide emulsifiers
Method of benzene-insoluble substancesdetermination for pesticide emulsifiersThis method is applicable to the determination of benzene-insoluble substances in pesticide emulsifiers. 2 Reagents
Benzene (GB690-77): chemically pure.
3 Apparatus
3. No. 14 sintered glass funnel.
3. 2500 ml suction filter bottle. Www.bzxZ.net
3. 3150 ml beaker.
4 Determination procedures
UDC 66.063.61
GB 3776.4—83
(Confirmed in 1989)
Wash the No. 4 sintered glass funnel and dry it in a 110℃ oven to constant weight (weighed to 0.0002 grams). Then put it on a 500ml suction filter bottle. Weigh 20g of the pesticide emulsifier sample in a 150ml beaker (weighed to 0.1g), add 80g of benzene, and stir with a glass rod until uniform. Pour the sample into the sintered glass funnel and filter it under vacuum. After filtration, wash the beaker and funnel with 100ml of benzene three times. Finally, filter for 5 minutes. Remove the sintered glass funnel and dry it in a 110℃ oven to constant weight (weighed to 0.0002 grams). Note: ① If the pesticide emulsifier sample is in a semi-solid state or has stratified precipitation, it should be slightly heated to make it in a homogeneous flow state. ② The operation should be carried out in a fume hood.
5 Result calculation
The content of benzene insoluble matter (% (X) in the sample is calculated as follows: X=
Wherein: A-
-The weight of the sintered glass funnel after constant weight, g; B
-The total weight of the sintered glass funnel and benzene insoluble matter after constant weight, g; B
G-The weight of the sample, g.
Additional notes:
This standard was proposed by the Ministry of Chemical Industry of the People's Republic of China and is under the technical jurisdiction of the Shenyang Chemical Industry Research Institute of the Ministry of Chemical Industry. This standard was drafted by Nanjing Zhongshan Chemical Plant. The main drafters of this standard are Zhang Junzhi and Tao Deming. Issued by the State Bureau of Standards on June 15, 1983
Implementation on June 1, 1984
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.