This standard specifies symbols for operator controls and other display devices on agricultural tractors and machinery. This standard applies to agricultural tractors and machinery, such as combine harvesters, cotton pickers, balers and forage harvesters. GB/T 4269.2-2000 Symbols for operator controls and other display devices on agricultural and forestry tractors and machinery, lawn and garden power machinery Part 2: Symbols for agricultural tractors and machinery GB/T4269.2-2000 Standard download decompression password: www.bzxz.net

1cs 65. 060.10
National Standard of the People's Republic of China
GB/T 4269. 22000
idt IS0 3767-2:1997
Tractors, machinery for agriculture and forestry, poyered Jawn and garden equipmentSymholsfoloperalor coolrols and oiher displays--Part 2:Symbols for agricultural tractors and machinery Oakinery2000-06-05 Issued
2000-11-01 Implementation
State Administration of Quality Supervision, Inspection and Quarantine
GB/T4269.22000
Technical standard equivalent to international standard S()9767-319918 Tractors and machinery for agriculture and forestry, horticultural and gardening - Symbols for operator control mechanisms and other display devices - Part 2: Symbols for operators of tractors and gardening machinery - Part 3: Symbols for operators of tractors and gardening machinery - Part 2: Symbols for operators of tractors and gardening machinery - Part 13: Supplement 13 of Part 2 ... This standard is different from the standard that was revised in the following aspects: 1. The content of the standard has been greatly adjusted: 2. New symbols have been added to the approved standard, and the symbols of the approved standard have been modified. The revised standard includes 100 new symbols; 89 new symbols:
8 symbols that were not modified in the original standard and were retained by the original standard.
This standard is part of the 3 series of symbols for mechanical model and other display of loading quantity This series of standards includes: Part 1: General symbols!
Part 2: Agricultural machinery and machinery chains; Part 3: Symbols for horticultural machinery. This standard shall be implemented from the date of implementation. GB/T4259.2-1-4. Appendix of non-standard artificial reminders. This standard is issued by the National Agricultural Machinery Industry.
This standard is established by the National Agricultural Machinery Industry Association. Units: China Agricultural Mechanization Research Institute, No. 10 ... 4269.22000
ISO Foreword
ISO (International Organization for Standardization) is an association of international bodies seeking standards (ISO) at a worldwide level. The preparation of International Standards is normally carried out through technical committees. Each member has the right to exercise its interest in an established technical committee and may also undertake the work: a governmental or non-governmental organization, related to the organization, may also participate in the work. The International Electrotechnical Commission (TEC) in all its fields of standards produces a technical draft standard which is submitted to its members for voting by the members. It is published as an International Standard requiring at least seven votes from its members.
International Standard 7S37672 was prepared by Technical Committee 1ISO/1℃23 Tractors and machinery for agriculture and forestry, subcommittee SC14, Classification, Symbols and Product Numbers, Type Manual. The second edition of this standard, which was formed according to the technical conditions, replaces the second edition (190376%2:1982), and the first edition is abolished at the same time. ISC376? In the general standard, symbols for operators' control mechanisms and other display devices of agricultural and forestry tractors and machinery, lawn and garden power machinery, and other parts are separated from the following parts:
Part 1: General symbols
Part 2: Symbols for agricultural tractors and machinery
Part 1: Symbols for operators' control mechanisms and other display devices of agricultural tractors and machinery, lawn and garden power machinery
Part 2: Symbols for agricultural tractors and machinery
Part 3: Symbols for agricultural tractors and machinery
Part 4: Symbols for forestry machinery
Part 5: Symbols for manual portable forestry machinery. Appendix A is a list of the contents of the standard.
1 Scope
National Standard of the People's Republic of China
Symbols for operators' control mechanisms and other display devices of agricultural and forestry tractors and machinery, lawn and garden power machinery
Part 2: Symbols for agricultural tractors and machinery
for agricultural and forcible construction:power equipment, lawn equipment, garden equipment—Symbls, operator controls and other displays, Purt 2:Ssnabols For agricultural and tural traetry and machineryGB/T4269.2—2000
idl S0 3767 2:1991
C/T4269.2—1784
This international standard stipulates! Agricultural tractors and machinery, such as picking and loading mechanisms, balers and harvesters? Reference standards
The following provisions of the standard have become the text of this standard through the introduction of the industry standard. When the standard is published, all versions are valid. All standards will be included in the review. The service party using the public standard should explore the applicability of the following standards and new versions: GB/1293 Due to the header number and its applicable month: ne150) 19: 1) [1/1425.1-203) Tractors and machine conditions, interactive J machine ladder structure and its product display symbol Part 1 General number d:)
546299 In the gas equipment drawing, the EC11: 4
CB3.15 Service graphic symbols General number ()00: 1589) 1627-95 Equipment shape general (1500: 95) /16273.? 93 Service symbol for welding equipment (ccS70:!) K! 16902.1-97 Graphic Numbers Use the following parts of the graphic number: The shape of the graphic symbol e 15t 331 1:1996i
3 Definitions
Definitions in TS.1 of this standard
4--General requirements
4.1 Symbols should be consistent with the corresponding standards or regulations of this standard. The special symbols selected in this standard are equal to the symbols used in the printing of the main structure of the wheel standard. The visual effect of the symbol is weakened and the visual effect of the symbol is reduced. The actual number is allowed to be realized in the actual month. 1.? The most inherent duplication and unskilled, may need to increase the shallow machine support equal to the symbol inferior and other minor rectification, so as not to change the basic graphic design of the flower symbol, the product Ding provides the false standard modification is sufficient 4.3 In order to improve the appearance and expected from the graphics symbol, or to cooperate with the said absolute cooperation thanks home quality technical supervision bureau 2000-06-05 approved effect, can be based on the need to change the handover
20001101 implementation
GB/T 4269.22930
or the system of the rent detail will be changed to the national use, in order to ensure the main characteristics of the symbol can be identified, the medical shape design sound can be similar to the symbol hand through the modification. WGBT16SC2.11497:7,: The provisions of. 4.4 In actual use, for easy recognition of the operator, the right symbol female made enough to understand. For proper size specifications of symbols, see E1392.1: Except where express symbols are used, symbols shall be used in the orientation specified in this specification. 4.5 Most symbols shall not be combined symbols, that is, the symbol and the equal sign shall be combined to form a new symbol.
4.6 If the direction of the machine or component part is from right to left, the symbol shall be from bottom to top. 4.7 The symbol and the display shall have a clear contrast with their background. The symbol shall have a dark background as much as possible. The product display symbol may use the product number or the color that best matches the background. The choice may be based on the designer's preference. If the symbol image is time-convertible (for example, black-to-white or self-convertible), the symbol should be convertible. 4.8 The symbol should be located on the control mechanism or display device it represents, or near it. If the control mechanism requires more than one symbol, the position of the symbol should be associated with the control mechanism, and the direction of movement of the control mechanism should be consistent with the direction indicated by the symbol. 1.9 Precautions for the use of symbols.Should comply with the provisions of GR/16902.1. The basic symbol of the symbol is the same as that of GR/16902.1, which is the registered symbol of 150/IE. The above registration numbers are GB/T4, 10/IEC, and the letters and numbers are used as symbols. Based on the equal sign 1, the letters and numbers related to the actuator structure and display device have specific meanings. This standard has no restrictions on the form and number of the characters: they can be replaced by other characters. Please pay attention to maintain clarity: 4.12 The symbols shown in the technical forum are 33% of the original size. The superscript "\" represents a square frame with a side length of 5. The symbol cannot be used to ensure that all symbols and graphics are consistent. 5 Color || tt || 5.1 When a series of colors are used for a small display device, it means the following meanings! 1. Secondary or serious malfunction, need to pay attention to the following: Information or color: stop normal 1. Work must be done outside;
A summary: normal working status,
E.2 to acid package carbon to indicate special functions:
a blue, end light:
: danger warning signal:
frequency light stop signal:
5.3 to indicate the heating or/and cooling system is in use when the color is red, the currency indicates heat, the color indicates reduction: 6 - general number
No. Product number
Symbol form shape makeup
GB/T 4269.2—2000
Symbol meaning
Field area
Operation area per hour
Continue the direction
Wheel spacing adjustment-big wheel-outward shift
Term section-left wheel-main shift
1S0/Book
Micro-number form
Agricultural tractor number
Symbol type/shape
G8/T 4269.2—2000
Symbol greed/application
Grand bottom lake bamboo·wheel-external color
Chengu seven wheels
Size number combination/application
Loss kidney axis-original symbol
Digging back axis-knife
Tube axis reduction
SO/EC registration number
ISO/IEC registration number
Selection sequence number
Number patrol/shape block
GB/T 4269.22000
Flower number contains text pressure
Remote distance cylinder basic number
Shichen network cylinder change box
Remote distance oil cylinder - floating
Differential lock
Can be connected (57) disconnected (5008)
Or Zhan Mai disconnected (C), into a connection platform
【0022) and separation 0023 send number one code
Push control machine - front wheel account dynamic
[Can be connected (7007, all Lift (5033)
Reduction Press pass/analysis open (5:11) or long table
(022 and sub-net (12) symbol together
150/EC Wang Book Number
Special Number Net Number
Character Climbing Type/Shadow
GB/T4269.2—2000
Line Number Meaning/Application
Power output shaft speed
【Used with the selected degree point indicated power extraction
Auxiliary speed. The speed effect but
should be indicated with the operating mechanism
the tractor wheel slips
according to the control machine moving forward
the diagram is for the blessing diagram
the foaming machine - backward
the machine letter is for the plan)
steering part number push machine and the 1st two push
will be the same signal guide and the 2nd full busy
excavator - basic pipe can
(the device is for the electrical diagram)
1S(/IC registration number
symbol number"
symbol and style/shape
harvesting machinery and equipment use number
derivation number number
number form/shape
GB/T 4269.2--.2000
Character guide gold text used
Traction-wood pair
(machine diagram view)
Traction disorder-treatment direction-toward
Traction machine-travel direction-backward
Machine diagram view
Traction pad machine Portuguese auxiliary front cap light
Symbol uniform/month
(The single device can be opened and the instrument is not opposite to this real machine!
Brittle anti-smear cylinder
【Can be continuously variable 34 or 04
ISOIEC specification number
IS0IF note number
Society number serial number
Character hand service type pulp
GB/T 4253.2—2000
Special symbol meaning seat river
bell type strong device
combine harvester-Qi steel elevator/end-mounted material discusser
combined collection Kairou elevator/operating forward delivery
combined loss separator dynamic
can be used with building communication (5007). disconnection meter (5308) or connect/disconnect 5010 or connect convex 13322 new
together (0123 call sign|
can be disconnected with near (! Or connect
on, disconnect and (3010 or connect (6222) and divide (6C23 etc. to make
lead from drive-creation transfer
[and connect flow 5007 disconnect rise (SC68 or pick
pass/open (6J10) or join (CC22) and other secret 23 to make
station and actual still task
element level change this: 1 or 13, or
add C5 (50(together
ISU/IEC note number
will number sequence Sign
Sign form/shape
GB/T4269.2—200D
Symbol application
Control state-floating
Technical gear or gear transmission
[Can be used with on (5007, (1(008) or on/off (5010), or engagement (0022) and lift (002%) signs)
Find age-height adjustment
[Can be used with stepless speed change (1364 or 5004), or increase (5M5) and decrease (50061 equal signs together
dial wheelless - cross level adjustment
[can be used with paperless speed (13M or 004), increase (5005 and decrease (5006) symbols 1
technical ability - business shift
press wheel - back shift
pointer does not teach transfer
level change 1364 or 4
first increase (55 decrease (66 symbol
1SUIEC registration special2—2000
Symbol greed/application
Grand bottom lake bamboo·wheel-external color
Chengu seven wheels
Format number combination/application
Loss kidney axis-original symbol
Digging back axis-knife
Tube axis reduction
SO/EC registration number
ISO/IEC registration number
Selection sequence number
Number patrol/shape block
GB/T 4269.22000
Flower number contains text pressure
Long distance cylinder basic number
Shichen network cylinder change box
Long distance oil cylinder - floating
Differential lock
Can be connected with (57) disconnection (5008)
or Zhanmai disconnection (C), forming a connection platform
【0022) and separation 0023 send number one code
Push Control machine - front wheel account dynamic
[can be connected with (7007, the rise (5033)
reduced by pass/analysis (5:11) or long table
(022 and subnet (12) symbol together
150/EC Wang book number
special number net number
symbol crawling/shadow
GB/T4269.2-2000
line number contains Definition/Application
Power output shaft speed
【The power output shaft speed is selected according to the selected speed. The speed should be consistent with the control mechanism. The wheel slip of the trailer is shown in the figure. The trailer moves forward. The figure is for the pull machine - backward. The machine is for the standard shot)
Steering part number pusher and the first two pushers
will be the same as the signal guide and the second full busy
excavator-basic pipe
(the device is an electrical diagram)
1S(/IC registration number
symbol number"
symbol and style/shape
harvesting machinery and equipment re-number
derivation number number
number form/shape
GB/T 4269.2--.2000
Character guide gold text used
Traction-wood pair
(machine diagram view)
Traction disorder-treatment direction-toward
Traction machine-travel direction-backward
Machine diagram view
Traction pad machine Portuguese auxiliary front cap light
Symbol uniform/month
(The single device can be opened and the instrument is not opposite to this real machine!
Brittle anti-smear cylinder
【Can be continuously variable 34 or 04
ISOIEC specification number
IS0IF note number
Society number serial number
Character hand service type pulp
GB/T 4253.2—2000
Special symbol meaning seat river
bell type strong device
combine harvester-Qi steel elevator/end-mounted material discusser
combined collection Kairou elevator/operating forward delivery
combined loss separator dynamic
can be used with building communication (5007). disconnection meter (5308) or connect/disconnect 5010 or connect convex 13322 new
cheng (0123 call sign together|
can be used with near (! Disconnect or connect
, disconnect and (3010 or connect (6222) and divide (6C23 etc. use
lead from drive - create transfer
[and connect 5007 disconnect rise (SC68 or pick
pass/open (6J10) or connect (CC22) and other secret 23 use
platform and actual still task
element level change this: 1 or 13, or
increase C5 (50(together
ISU/IEC note number
will number serial number
equal sign form/form
GB/T4269.2-200D
symbol combined text application
control state - floating
technology not wheel or not mechanism transmission
[can be with On (5007, (1 (008) or on / off (5010), or engage (0022) and lift (002%) signs)
Find the age - height adjustment
[Can be used with stepless speed change (1364 or 5004), or increase (5M5) and decrease (50061 signs]
Dial the wheel - cross adjustment
[Can be used with paperless speed (13M or 004), increase (5005 and decrease (5006) signs]
Technical ability - commercial shift
Press the wheel - move back
Point to the non-teaching transfer
Step change 1364 or 4
First increase (55 decrease (66 signs
1SUIEC registration special2—2000
Symbol greed/application
Grand bottom lake bamboo·wheel-external color
Chengu seven wheels
Format number combination/application
Loss kidney axis-original symbol
Digging back axis-knife
Tube axis reduction
SO/EC registration number
ISO/IEC registration number
Selection sequence number
Number patrol/shape block
GB/T 4269.22000
Flower number contains text pressure
Long distance cylinder basic number
Shichen network cylinder change box
Long distance oil cylinder - floating
Differential lock
Can be connected with (57) disconnection (5008)
or Zhanmai disconnection (C), forming a connection platform
【0022) and separation 0023 send number one code
Push Control machine - front wheel account dynamic
[can be connected with (7007, the rise (5033)
reduced by pass/analysis (5:11) or long table
(022 and subnet (12) symbol together
150/EC Wang book number
special number net number
symbol crawling/shadow
GB/T4269.2-2000
line number contains Definition/Application
Power output shaft speed
【The power output shaft speed is selected according to the selected speed. The speed should be consistent with the control mechanism. The wheel slip of the trailer is shown in the figure. The trailer moves forward. The figure is for the pull machine - backward. The machine is for the standard shot)
Steering part number pusher and the first two pushers
will be the same as the signal guide and the second full busy
excavator-basic pipe
(the device is an electrical diagram)
1S(/IC registration number
symbol number"
symbol and style/shape
harvesting machinery and equipment re-number
derivation number number
number form/shape
GB/T 4269.2--.2000
Character guide gold text used
Traction-wood pair
(machine diagram view)
Traction disorder-treatment direction-toward
Traction machine-travel direction-backward
Machine diagram view
Traction pad machine Portuguese auxiliary front cap light
Symbol uniform/month
(The single device can be opened and the instrument is not opposite to this real machine!
Brittle anti-smear cylinder
【Can be continuously variable 34 or 04
ISOIEC specification number
IS0IF note number
Society number serial number
Character hand service type pulp
GB/T 4253.2—2000
Special symbol meaning seat river
bell type strong device
combine harvester-Qi steel elevator/end-mounted material discusser
combined collection Kairou elevator/operating forward delivery
combined loss separator dynamic
can be used with building communication (5007). disconnection meter (5308) or connect/disconnect 5010 or connect convex 13322 new
cheng (0123 call sign together|
can be used with near (! Disconnect or connect
, disconnect and (3010 or connect (6222) and divide (6C23 etc. use
lead from drive - create transfer
[and connect 5007 disconnect rise (SC68 or pick
pass/open (6J10) or connect (CC22) and other secret 23 use
platform and actual still task
element level change this: 1 or 13, or
increase C5 (50(together
ISU/IEC note number
will number serial number
equal sign form/form
GB/T4269.2-200D
symbol combined text application
control state - floating
technology not wheel or not mechanism transmission
[can be with On (5007, (1 (008) or on / off (5010), or engage (0022) and lift (002%) signs)
Find the age - height adjustment
[Can be used with stepless speed change (1364 or 5004), or increase (5M5) and decrease (50061 signs
Dial the wheel - cross adjustment
[Can be used with paperless speed (13M or 004), increase (5005 and decrease (5006) signs 1
Technical ability - commercial shift
Press the wheel - move back
Point to the non-teaching transfer
Step change 1364 or 4
First increase (55 decrease (66 signs
1SUIEC registration special2—200D
Symbol combination application
Control state - floating
Technical gear or gear transmission
[Can be used with on (5007, (1(008) or on/off (5010), or engagement (0022) and lift (002%))
Find the age - height adjustment
[Can be used with stepless speed change (1364 or 5004), or increase (5M5) and reduce (50061 equal sign together
dial wheel-crossing adjustment
[can be used with paperless speed (13M or 004), increase (5005 and reduce (5006) symbols 1
technical ability-business shift
press wheel-backward shift
pointer does not teach transfer
level change 1364 or 4
first increase (55 reduce (66 symbol
1SUIEC registration special2—200D
Symbol combination application
Control state - floating
Technical gear or gear transmission
[Can be used with on (5007, (1(008) or on/off (5010), or engagement (0022) and lift (002%))
Find the age - height adjustment
[Can be used with stepless speed change (1364 or 5004), or increase (5M5) and reduce (50061 equal sign together
dial wheel-crossing adjustment
[can be used with paperless speed (13M or 004), increase (5005 and reduce (5006) symbols 1
technical ability-business shift
press wheel-backward shift
pointer does not teach transfer
level change 1364 or 4 bzxz.net
first increase (55 reduce (66 symbol
1SUIEC registration special
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.