title>GB/T 2884.3-1996 Yangtze River system segmented barge type standard series--1000 ton segmented barge type standard for direct access and water transport network in the middle and lower reaches of the Yangtze River - GB/T 2884.3-1996 - Chinese standardNet - bzxz.net
Home > GB > GB/T 2884.3-1996 Yangtze River system segmented barge type standard series--1000 ton segmented barge type standard for direct access and water transport network in the middle and lower reaches of the Yangtze River
GB/T 2884.3-1996 Yangtze River system segmented barge type standard series--1000 ton segmented barge type standard for direct access and water transport network in the middle and lower reaches of the Yangtze River

Basic Information

Standard ID: GB/T 2884.3-1996

Standard Name: Yangtze River system segmented barge type standard series--1000 ton segmented barge type standard for direct access and water transport network in the middle and lower reaches of the Yangtze River

Chinese Name: 长江水系分节驳船型尺度系列--长江中下游干支直达和水运网1000 吨级分节驳船型尺度

Standard category:National Standard (GB)

state:in force

Date of Release1996-06-17

Date of Implementation:1997-01-01

standard classification number

Standard ICS number:Shipbuilding and offshore structures >> 47.060 Inland vessels

Standard Classification Number:Ships>>Ship General>>U14 Inland Waterway Transport Ship General

associated standards

alternative situation:Replaces GB 2884.3-1981; GB 2884.4-1981; replaced by GB/T 2884.2-2009

Publication information

publishing house:China Standards Press

other information

Release date:1981-12-31

Review date:2004-10-14

Drafting unit:Institute of Standards and Metrology, Ministry of Transport

Focal point unit:National Technical Committee for Inland Waterway Standardization

Publishing department:State Bureau of Technical Supervision

competent authority:Ministry of Transport

Introduction to standards:

This standard specifies the general requirements, model composition and markings for the 1,000-ton segmented barges of the Yangtze River. This standard applies to segmented barges that navigate the Class III waterways of the Yangtze River and its connecting trunk and branch routes. GB/T 2884.3-1996 Yangtze River System Segmented Barge Model Scale Series - Segmented Barge Model Scale for 1,000-ton Segmented Barges in the Yangtze River and its Connecting Trunk and Branch Routes GB/T2884.3-1996 Standard Download Decompression Password: www.bzxz.net

Some standard content:

GB/T 2884.3-1996
This standard is a revision of GB2884.3-81 and GB2884.4-81, and the main dimensions of the ship type have been changed. After the revision of this standard, the original GB2884.3-81 and GB2884.4-81 are no longer valid. The division of waterways in this standard is consistent with the requirements of GB139-90 "Inland Waterway Standard".
This standard is proposed by the Ministry of Communications of the People's Republic of China. This standard is drafted by the National Inland Waterway Standard Promotion Technical Committee. The drafting units of this standard are: Standard Metrology Research Institute of the Ministry of Communications, Yangtze River Ship Design Institute. The authors of this standard are: Liu Huiru, Xiang Zhizhong, Wang Feifei. This standard was first issued on December 31, 1981. This standard is entrusted to the Yangtze River Ship Design Institute for interpretation. W.National Standard of the People's Republic of ChinabzxZ.net
Dimensions of integrated barges series of integrated barges to the changjlang waterwaysDimensions of Integrated barges For the direct transport inmain-branch rontes of the middle-downstream of the chwngjinngand waterway network-1 000pwT1Model
GB/T 2884.3—t996
GB268+-3—
Generation C 288.4—B1
This standard specifies the general requirements, model composition and markings for 1000-ton segmented barges of the Yangtze River. This standard is applicable to segmented barges navigating in the direct transport inmain-branch rontes of the middle-downstream of the chwngjinngand waterway network and the sub-class waterways of the waterway network connected with them in the middle and lower reaches of the Yangtze River. 2 Definitions
This standard adopts the following definitions
Waterway network
The inland navigable waterways including the Yangtze River, Pearl River, Qiantang River, Huai River, Yellow River, Haihe River and other river systems (including the Beijing-Hangzhou Grand Canal) connected by the Beijing-Ji, Xiang-Guang, Gan-Yue, Zheng-Zhun canals.
3 General requirements
3.1 Vessel tonnage: 1 000 t.
3.2 Principal dimensions of vessel: overall length 67.5 m, moulded breadth 10.8 m, draft 2.0~2.4 m. 4 Model composition
The model consists of four parts,
indicates the tonnage of the section
"节" the first letter of the Chinese pinyin, indicates "sectioned barge"\|"网" the first letter of the Chinese pinyin, indicates "water transport network"\|"长" one letter of the Chinese pinyin, indicates \Yangtze River\Approved by the State Technical Supervision Bureau on June 17, 1996
Implementation on January 1, 1997
W.5 Marking
GB/T 2884.3-1996
5 1 All barges are equipped with a signboard including the following contents: a) ship model, factory serial number, standard number; b) overall length, waterline length, double width, molded operation, design draft, full-scale drainage pan; d) manufacturer's name:
d) year and month of construction.
52 The sign is rectangular in shape, 330mm long and 200mm wide, and is made of metal material (steel, aluminum or other). W.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.