JB/T 9119-1999 Multi-head saddle stitcher JB/T9119-1999 standard download decompression password: www.bzxz.net

ICS 37, 1)0. 10
Machinery Industry Standard of the People's Republic of China
JB.T9119-1999
Multiple-head saddle stitching machine
Multiple-heat saddle stitching machine1999-07-12 Issuedbzxz.net
National Bureau of Machinery Industry
2000-01-01 Implementation
JB.T9119--1999
This standard is a revision of JB.T9119--1999
This standard is a revision of JB.T9119--1999. The original standard has been revised and revised, and the main technical content has not changed. This standard is implemented from the date of JB.T9119--1999. This standard is issued and managed by the National Printing Machinery Standardization Technical Committee. Water freezing standard starting unit: Zhunnan competition standard Fan Guishua Huixiong Co., Ltd.: This cup standard starting person: Zhang Wenjiang, Jiang Yide, this standard was first released on February 2$H, 1989. Standard
Machinery Industry Standard of the People's Republic of China
Multi-head saddle stitching machine
Multiple-head saddle stitching machine JB/T9119-1949
-187 1+--84
Specially applicable to the type and basic level of multi-head saddle stitching machine, technical requirements, test methods and inspection specifications, markings and packaging tables. The following is a simplified version of the machine consisting of automatic book feeding, automatic binding, automatic book collection and operation control parts.
1 Referenced standards
The provisions contained in the following standards constitute the provisions of this standard through reference in the standard. When this standard is issued, the versions shown are all effective: All the standards will be revised. The parties using non-standards should explore the possibility of using the latest version of the following standards. GD/T $226.1[996
GB/T 9969.1—1998
GHT 13306—1991
GB:14436—1993
3099—99
! Type and basic parameters
3.1 Type
Multi-head, white dynamic, riding type.
1 Industrial mechanical and electrical equipment Part 1: General technical specifications [General provisions for industrial product instructions General provisions for industrial product guarantee documents Printing machinery product model synthesis method 32 The model and name of the machine product shall comply with the provisions of B0. 3.3 Basic vertical parameters
) Report the maximum binding thickness: 4m:
1) Maximum binding surface: 305m^4umm, 320mm4.50 mm: () Minimum binding width: 89m127m, 112mm*160mm: d; Nail leg density: [3mm;
c Binding speed: 30-80 times m plus
f) Two binding center energy: 45-2.7m:
8.) Drinking line specifications: No. 25, No. 2.
4 Technical requirements
4.1 The book punching machine should be made in accordance with the provisions of this standard and the drawings and technical documents approved by the current procedures. 4.2 Function
4.2.! Record the book and ensure that it is bound from the book folding chain, and the day is semi-fixed. The National Machinery Industry Bureau approved 200001-01 practical model on July 12, 1999
JB/T 91[9-1999
4.2. The machine should ensure the whole operation of the book from the person, the book delivery, the binding to the book collection. 4.2.3 The machine should ensure the single adjustment, accurate positioning, no spontaneous movement, reliable. 4.2.5 The increase of the book folding (impact pressure) should not exceed 78 (A34.3 Assembly parts
4.3.1 The center of the hook steel plate should be tight and the half-surface symmetry difference should not exceed 34.3.2 The assembly parts should be adjusted accurately and firmly: 4.4 Binding
4.4.! The two nail feet should be straight and close to the bound book. 4.4.2 The stapler is not allowed to be missing.
4.4.1 The length of the staple foot is greater than mm, but it is not allowed to overlap. 4.4.4 The distance between the nail foot and the floating hole is 13±2】mm. 4.4.5 The offset of the center of the stapler should not be less than 1mm. 4.5 Appearance quality
4.5, 1 The stapler is not allowed to have defects such as sinking, rust and scratches. 4.5.2 The paint layer should be clean, the color should be uniform, and there should be no obvious protruding particles, adhesion marks, no hanging, no pooling, no light and obvious orange. 4.6 Safety
4.6.1 The safety protection devices should be complete and reliable: 4.6.2 Electrical quality
4.6.2.1 The internal resistance between the short-circuited sweeping circuit and the protection circuit wire should be not less than 1M: 4.6.2.? The resistance between the external conductor and the external gas equipment shall be less than 0.154.6.2.3H gas equipment 2 shall be subjected to a 15-hour test. The test voltage is 15V [50Hz). There shall be no step-through phenomenon. 4.7 The product is provided as a complete set: a) Main machine: b) Inspection tools, accessories and spare parts. 5 Test method and qualified inspection rules 5.1 The machine shall be inspected and tested by a stopwatch or a speed meter, and it shall comply with the provisions of 3.3). 5.1.2 The quality of the binding machine shall be measured with a vernier caliper, and it shall comply with the provisions of 4.4.3~4.4.5. 5.1.3 The appearance of the book machine shall be inspected by sight, and it shall comply with the provisions of 4.5. 5.1.4 Idle running test: Carry out an idle running test of not less than 10 minutes at a speed of 10 times/min, and the test shall meet the requirements of 4.23. 5.1.5 Idle running test: Turn the speed regulating knob at a speed of 30~100 times/min, and carry out a stepless speed regulation test of not less than 10 minutes. The test shall meet the requirements of 4.2.4.
5.1. Machine head assembly test: Carry out an assembly test on each machine head at a speed of 80 times/min or the requirements given in Table 1. The assembly quality shall meet the requirements of 14.1~.1.1.1. 2
Hot-loading
Printing paper
Machine head door test
Wire missing
Continuous comparison test
5.1. Free test: Use 25# iron wire to bind for 70 times per minute, and carry out hot machine preload test according to the provisions of Table 2. The binding quality meets the requirements of 4.4. The batch is 110 sets, and only one of the 2.32 million double-joint test items is done: If unqualified: add test, if unqualified, use the test
Table 2 What test
5.1.8 Full inspection
Liquid paper
Book format
32L double film
16 open single Pu
32 and continue
16 for single joint
5.1.8.1 Check all protective devices in the case, which should meet the requirements of 4.6. 5.1.8.2 According to the provisions of 20.3 in GB/T5226.1-1996, test the insulator resistance, and its value shall comply with the provisions of 4.6.2.1. 5.1.8.3 According to the provisions of 20.2 in GR/T522.6.1-199G, test the resistor, and its value shall comply with the provisions of 4.6.2.2. 5.1.N.4 According to the provisions of 20.4 in GB/T5226.1-1996, conduct the pressure resistance test, and the pressure reduction strength shall comply with the provisions of 4.6.2.3. 5.1.9 The stapler shall be inspected and qualified by the quality inspection department of the light production station before it can be shipped out of the factory. If there are major improvements in the structure, materials, etc., a type inspection shall be carried out. 5.2.1 Type inspection includes the contents specified in this standard. 5.2.2 Product noise level: The noise level at four points at a height of 1.5m and 1m from the center of the machine is measured at the normal level: Under the condition of 1m: The noise level at four points at a height of 1.5m and 1m from the ground is measured at the maximum binding thickness of 52sm. Take the arithmetic average, and the original provisions of 4.2.5 shall be met.
6 Marking and packaging
6.t Each product shall be fixed with a label in a conspicuous position. The label size shall comply with the provisions of GBT11206, including: a) manufacturer name;
b) product model, name
C) main parameters of the product!
d) manufacturing date (or) or production batch number. 6.2 The product shall be wiped dry before packaging, and the exposed surface shall be coated with anti-grease. The main half shall be covered with anti-corrosion paper. 6.3 The product packaging box shall be covered with waterproof material, and the box shall be suitable for continuous transportation and bag loading.4. The parts and components should be marked on the outer wall of the packaging box. The name, product name, product type, and packaging box volume should be marked with "lifting", "upward" and "downward" and other words. The text and markings should be clear and complete, and the front water flushing bureau should be called for a long time and the model should be clear.
6.3 Random documents
When each product is shipped, the following documents should be provided: a) Product certificate
The preparation of the product certificate should comply with the provisions of GB [4436, b1 Product instructions
The inner inspection of the product should comply with the provisions of GBT9969.1 e) Packing list.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.