JB/T 8601.2-1998 This standard specifies the requirements and inspection methods for the presetting, geometric accuracy and working accuracy of roll lathes. This standard is applicable to general-purpose ordinary precision roll lathes with a maximum workpiece diameter of 400~2000mm and a maximum workpiece length of up to 10000mm. JB/T 8601.2-1998 Roll lathe accuracy inspection JB/T8601.2-1998 standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
JB/T8601.2-1998
Roller Lathe
1998 07-17 Release
Precision Inspectionwww.bzxz.net
1998-12 1 Implementation
Released by the State Machinery Industry Bureau
JI5/T 8601.2-1998
This standard is formulated on the basis of summarizing the production experience and use of other lathes in my country. This standard is part of the rolling lathe series standard. Under the general standard of the rolling lathe, it includes the following two parts: Part 1 (ie B/T8601.1), Part 2 (ie JB/T5501.2): Precision Inspection. This standard was proposed by the National Technical Committee for Standardization of Cutting Machine Tools. This standard is under the jurisdiction of the Heavy Machine Tool Branch of the National Machine Tool Standardization Committee. The originating units of this standard are: Qihar No. 1 Machine Tool, Shangyou Heavy Machine Tool Factory, Qinghai Heavy Machine Tool Factory, Zaoye Machine Tool Factory, and the main drafters of this standard are: Zhao Yinlao, Fang Guolan, Yang Changbei, and Baoshun. Machinery Industry Standard of the People's Republic of China
Precision Inspection
Lathe
JB/T86m1.2199H
This standard is for the requirements and inspection methods of the working accuracy of each lathe before setting the adjustment of the rolling mill. This standard is applicable to the measurement of 439~200cm of the two pieces of bad fire, and the total length of the pieces is 10,000 a. 2. Reference standards: The standard clauses in a list of standards are referenced in this standard and become the clauses of this standard. When the standard is published, the following clauses are still subject to change: The parties to the standard should explore the possibility of using the following standards: E/T1182-1596 Position tolerance and position tolerance rules. Complete symbol diagram method B267062 General requirements for precision inspection of cutting machine tools 3. According to B26702.1 Adjust the water level. Place the plate on the guide rail of the bed, and adjust the guide rail slightly at both ends of the machine tool. The horizontal direction is 0.06/1C. 3.2 The top adjustment test can be carried out in the table. The load test and re-inspection are not required. 3.3 During the inspection, the tools and inspection force can be connected. The inspection items are required to be inspected on the same day. Arrange the original inspection order. 3.+1. During this inspection, the inspection should be carried out according to the car. 3.5 When the actual length is different from the length specified in this standard, the length specified in JB2570822.3.1.1 should be calculated according to the length specified in JB2570822.3.1.1.
3.6 The parallel bed is called the level room, and the vertical bed is called the picking room. National Machinery Industry High 1998--17 approved
1998-13-01 real family
Shui Guang Gong
0001/97
JB/T 8601.2—1998
"Yin Le
0009-~
GocE/ont
COGL/ORO'G
8601.2—1998
Shangshui Five
8601.21998
''t*g'
JR/T 8601.2-- 1998
092~-084-2
6601.2—1998
ta'tr'9
"Police according to the Communist Party
s''t's
5: Fight 00.9
Niu+Re-learn
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.