This standard is formulated with reference to ISO 9188:1993 (E) "Machine tools - Closed single-action mechanical presses with nominal force 400kN~4000kN - Parameters and dimensions", combined with the requirements of double-action sheet metal drawing process and parts for the parameters and dimensions of hydraulic presses. This standard specifies the basic parameters and dimensions of single-action sheet metal stamping hydraulic presses. This standard applies to the Y27 series single-action sheet metal stamping hydraulic presses. JB/T 8492-1996 Basic parameters of single-action sheet metal stamping hydraulic presses JB/T8492-1996 Standard download decompression password: www.bzxz.net

JB/T 8492-96
This standard is formulated with reference to ISO9188:1993 (F) "Machine Tools - Parameters and Dimensions of Closed Single-Action Mechanical Force Machines with Nominal Force of 400kV to 4000kN" (hereinafter referred to as IS) standard), combined with the requirements of double-action sheet metal drawing process and parts for parameters and dimensions of hydraulic presses.
The basic parameters and dimension tables in this standard are neither in the form of ISO standards nor in the form of other current parameter standards in this industry. The main reason is that the selection range of parameters and sizes specified in ISO standards is too large, which is inconvenient for users to select products (this refers to "parameters and sizes", the same below) and manufacturers' designs, while the selection range of parameters and sizes of other current parameter standards in this industry is too narrow to meet the needs of the market. Therefore, this standard combines the different characteristics of ISO standards and other current parameter standards in this industry, and for the first time in this industry, formulates the parameter standard of "selecting parameters and sizes within a certain range by using corresponding or cross methods"; due to the different structures and performances of hydraulic presses, the parameter items of this standard are determined by the specific functions and characteristics of hydraulic presses; this standard also refers to the provisions of ISO standards, and especially emphasizes that the parameter standard "does not limit the selection of users and the design of manufacturers". In this way, it can adapt to the needs of the domestic market and international trade, technical and economic exchanges as soon as possible, as well as the need for leapfrog development by adopting international standards. This standard has been implemented since January 1, 1997. Appendix A of this standard is a prompt appendix.
This standard is proposed by the Technical Committee for Standardization of Forging Machinery. This standard is under the jurisdiction of Jinan Foundry and Forging Machinery Research Institute of the Ministry of Machinery Industry. The responsible drafting unit of this standard: Dajin Forging Machine Tool Co., Ltd. The participating drafting units of this standard: Hefei Forging Machine Tool Factory, Huzhou Machine Tool Factory, Xuzhou Pressure Machinery Co., Ltd. The main drafters of this standard: Cai Jindi, Yin Xiu This standard was first issued on November 7, 1996. 3333
1 Scope
Machinery Industry Standard of the People's Republic of China
Single-action Thin Plate Stamping Hydraulic Press
Basic Parameters
This standard specifies the basic parameters and dimensions of single-action thin plate stamping hydraulic press. This standard applies to Y27 series single-action thin plate stamping wave press. 2 Referenced Standards
JB/T 8492-96
The provisions contained in the following standards constitute the provisions of this standard by reference in this standard. The versions shown are valid at the time of publication of this standard. All standards are subject to revision. Parties using this standard should explore the possibility of using the latest versions of the following standards: JB3/T 611--91 Hydraulic press main parameter series JB4174-86 Hydraulic press terminology
3 Basic parameters and dimensions of single-action thin plate stamping hydraulic press 3.1 The parameter diagram of single-action thin plate stamping hydraulic press is shown in Figure 1. 3.1.1 The parameter diagram of single-action thin plate stamping hydraulic press only expresses basic parameters and dimensions, and does not restrict the user's selection and manufacturer's design.
3.1.2 Meaning of the codes in the parameter diagram of the single-action thin plate stamping hydraulic press: a) lI is the maximum opening height of the slider;
b) S is the maximum stroke of the slider;
() S is the maximum stroke of the hydraulic pad (lower slider); d) B is the left and right dimensions of the slider and the workbench (referring to the workbench plate, the movable T workbench, the same below); e) T is the front and rear dimensions of the slider and the T workbench; [) B) is the left and right dimensions of the hydraulic pad's push rod hole distribution (referring to the center line distance of the maximum distribution of the push rod hole in the left and right directions: g) T, is the front and rear dimensions of the hydraulic pad's push rod hole distribution (referring to the center line distance of the maximum distribution of the push rod hole in the front and rear directions). 3.2 Basic parameters and dimensions
Basic parameters and dimensions are shown in Table 1.
Approved by the Ministry of Machinery Industry of the People's Republic of China on November 7, 1996 334
Implementation on January 1, 1997
JB/T8492--96
Chinaoooo
Figure 1 Schematic diagram of parameters of single-action thin plate stamping hydraulic press 33
Nominal force P
Hydraulic thermal force
Opening II height H
Slider stroke S
Hydraulic pad stroke Sm
Slider and
Workbench dimensions
Hydraulic force
Ejector rod hole distribution
Dimensions
JB/T 8492-- 96
Basic parameters and dimensions
100|125160200160200250315200250315400|25033151100159
Left Rmm
Front and rear T
Left in stone Bn! mm
Front position T, mm
Downward stroke
Slider speed
Working vumm/s
Nominal force
Hydraulic cushion forcebzxz.net
Opening height 11
Slider stroke s
Hydraulic stroke ST
Slider and working left and right B
Working table ruler
Axillary pressure pad
Top rod hole size
Cloth size
Front position!
Dongcun B
Front training T
Downward stroke
Slider speed
Working Vormm/s
Nominal force P
Hydraulic cushion force"
Opening height H
Slider stroke S
Hydraulic cushion stroke S\
Slider and worktable size
Wave pressure
Pre-rod hole distribution
Distribution size|| tt||Left and right B
Front and rear T
Left and right Bumm
Front tower Timm
Downward travel
Slider speed
.V.mn/s
400500
6308001000
63080010001251
800100012501600100012501600|2000 125016002000|25001200
Nominal force
Hydraulic cushion force P
Opening height H
Slider stroke S
Hydraulic cushion stroke Sn
Slider and worktable dimensions
Hydraulic force
Push rod hole distribution
Distribution size
Slider speed
Left and right B
Front and rear T
Left and right B" mm
Front and rear Tn|
Idle travel down||tt ||Working V, mm/s
Nominal force P
Hydraulic cushion force Pp
Opening height H
Slider stroke S
Hydraulic cushion stroke Sr
Slider and worktable dimensions
Hydraulic cushion
Rod hole division
Left and right B
Front and back T
Left and right Bn
Cloth dimensions Front and back,
Idle travel downward
Slider speed
Working Vemm/s
JB/T 8492 -96 | |tt | 300 806013tg1600
3.3 Principles for selecting parameters and dimensions of single-action sheet metal stamping hydraulic press3.3.1 For one nominal force specification, only one hydraulic cushion force parameter 1000
3.3.2 The opening height, slider stroke and hydraulic cushion stroke, workbench (left and right, front and back) dimensions, and hydraulic cushion push rod hole distribution (left and right, front and back) dimensions can be adopted according to the parameters and dimensions listed in Table 1, or can be cross-selected.3.3.3 Speed
3.3.3.1 For one nominal force (specification) product, only one idle travel down speed parameter and one T working speed parameter are selected respectively.3.3.3.2 Under normal circumstances, the slider return speed should be equal to or greater than one-third of the slider idle travel down speed3.3.4 In special circumstances, when the slider and workbench dimensions and hydraulic push rod hole distribution dimensions specified in this standard are not used, the recommended dimensions in Appendix A (Reminder Appendix) can be used. 137
JB/T8492-96
Appendix A
(Suggested Appendix)
Distribution size of push rod holes of slide block, work table and hydraulic pad In general, the distribution size of push rod holes of slide block and work table (left and right, front and back direction) and hydraulic pad (left and right, front and back direction) should be 3.2A
Selected in accordance with the provisions of Table 1 "Basic parameters and dimensions". In special cases, the dimensions recommended in this appendix shall be used. A2 Slider and L worktable dimensions
A2.1 Slider and worktable left and right dimensions (Table A1)Table Al
Slider and worktable left and right dimensions
Note: This table includes both the dimensions specified in 3.2 and the recommended dimensions of this appendix. Same below. A2.2
Slider and worktable front and back dimensions (Table A2)1600
Slider and worktable front and back dimensions
Hydraulic cushion push rod hole distribution dimensions
Hydraulic cushion push rod hole distribution left and right dimensions (Table A3)1000
Hydraulic cushion push rod hole distribution left and right dimensionsTable A3
Note: * refers to when it is less than 300mm, the size is customized. Below. A3.2
Dimensions of the front and rear directions of the pre-rod holes of the hydraulic pad (Table A4) Table A4
Dimensions of the front and rear directions of the top rod holes of the hydraulic pad 600
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.