GB/T 8628-2001 Textiles - Preparation, marking and measurement of fabric specimens and garments for testing dimensional changes
Some standard content:
IL 55. C83. 33:51. 020
National Standard of the People's Republic of China
GB/T 8628—2001
eyviso3759.1994
Textiles
Textiles--Preparation, narking and neasuringof fahric specimens and garments in testsfor determination of dimensional change2001-02-26Promulgated
2001-09-01Implementation
State Administration of Quality and Technical SupervisionPromulgated
:BT8628-2001
This standard is based on S55:9 Edition One - Preparation, marking and neasuring of fahric specimens and garments in testsfor determination of dimensional change 8 Preparation of sample and measurement of size changes and test markings 133-10 Determination of clothing piece changes Preparation of test markings and test methods for children You have selected the main technical contents, test methods and IS () 3759: 19\! Effective.
G6281966G18-1: 1. According to the national standard, the contents of G-1G-2 have been made and: 2. To use the international standard to confirm the process and build ten related effects: 3, the lining step by step and the standard signature, record the end delivery; 1. The fabric width is less than 653: For the sample standard: the measurement is carried out as the indicative content of the record A: 3. For the clothing category, the new standard has been made, and the tights and belts in the original standard for women's clothing have been eliminated, and the original markings of breast wings, body, and gloves have been reduced as reminders.
Too light disinfection and GB86 textile test method for the determination of the total amount of household detergents and the change of household detergents after washing and drying, the appendix is the appendix of the standard, this standard is implemented from the beginning, replaces G3/T62R1a and GB/T: 371992. This standard is issued by the National Textile Industry Standardization Technical Committee, which is responsible for the drafting of this standard: the Institute of Industrial Environmental Standardization and the Shanghai Municipal Industrial Supervision and Administration Bureau, and the Zhongshan Exit Inspection and Quarantine Bureau is responsible for the drafting of this standard:
This standard is issued by the first batch of enterprises in 1366 and revised in 201. CR/T 36282001
ISo
TSO International Organization for Standardization (ISO) is a member of the International Organization for Standardization (ISO). International standards are usually formulated by ISC: Technical Committee. For technical committees that have been in operation for a long time, there are long-term participation in the work of the committee and the contact with international organizations. S maintains a cooperative relationship with the committee in all matters related to electrical equipment. The technical committee is a member of the international standardization committee and can be issued as an international standard by voting. The international standard TS0) 3759 was formulated by the International Organization for Standardization Technical Committee (TS0/T8852). The 3rd edition is a technical revision of the 2nd edition and replaces the [3rd edition (ISO) 371, 101). The following changes should be made on the second edition: 1) The measurement position of the selected garment production plant was revised. E) The method was extended to include the following: 1 Scope || tt || National Standard of the People's Republic of China || tt || Textiles - Preparation, marking and measurement of fabric specimens and garments in tests for determining dimensional changes Textilcs-Prepuntiunmarking and nieasuringaf fahric sperinens nmd garments in tests Far dcterninsliunl ul dmensimmal rhangeGHT3628—2001 || tt || eqr 150 3759:1934
15+12xX1938
GN176S.-1A52
This standard specifies the requirements for the measurement and marking of woven fabrics and fabric components after washing, washing, washing, and washing.
This standard applies to woven fabrics, knitted fabrics and textile products, and is not applicable to products that can be easily extended in the same place, such as case fabrics and furniture coverings.
2 Referenced standards
The provisions contained in the above standards have become the provisions of the standard by reference in this standard: the versions shown in the standard are valid, all standards will be revised, and the parties using this standard should explore the possibility of using the latest version of the standard. H62519H Jinspin! Fine adjustment and total adjustment of products according to standard atmosphere R/T81701957 numerical revision rules
3 Original construction
Take out the sample of the surface of the textile to be inspected. Store 4 test points - mark on the test points, and measure the height between each pair of extension points after the specified measurement.
4 Install black
4.1 The length of the measured length is the length of the ruler or steel tape measure or glass fiber ruler. If the measurement is completed, the accuracy of the measurement should be calibrated for 6 months. 4.2 The use of other materials to accurately mark the clothing, for example:) water-resistant or non-fading marking devices. If necessary, the following specifications can be used: c) silk with a certain color that will not fade when the fabric is dyed. It is used to make small holes in the thermoplastic material. d) staplers. For samples that are not stirred (such as bubbles in water), staplers can be inserted into the fabric for measurement. The mark on the cloth is measured by staplers. 4.3 Smooth measuring table, sufficient to support the entire product 4.4 Equipment capable of producing standard air for textile conditioning and testing 4.5 Hangers, used to support garments, CB:1E28-2001, CB:1E28-2001, CB:1E28-2001. 6 Fabric specimens 6.1 Samples The sample width shall be the same as the sample width. There shall be sufficient test area to represent the entire width of the fabric, and the sample shall not be obtained in 1m apart sheets of fabric. G2 rulers shall be used to cut the sample, and each side shall be 53mm and 5cmm, and parallel to the length and width of the fabric. If the width is less than 6m, the test shall be conducted in the whole room with the cooperation of the relevant parties. If the fabric may come off during the test, the edge of the sample should be locked with a dimensionally stable stitch: Note 2: The edge of the sample is not easy to flow and the size is not suitable for the test. 6.3 Micro-proof
Place the test bar and let it rest. After the test, at least three pairs of marks should be embedded in the length and width of the test bar. There should be at least a distance of m between each pair of marks: The distance between the three marks should not be less than 5 m. The distance between the three marks should not be less than 1 m. EssG
Figure, the sample should be placed in the pre-adjusted humidity to achieve a constant level (see the first inspection): When the change of the amount of 1 to 25 pairs is not less than 1, the constant humidity is achieved. 6.5 Pass
Place the sample in the standard test! See Chapter No. 3. and 5) in this article, all measurements should be made in the following order: 6.6. Write the dimensions before measuring on the measuring table (1. Gently play with the flat surface, avoiding twisting the sample. 1.1. In the standard of the second type, the height between the two marked points should be recorded accurately to the nearest 1m. 7. Clothing: The parts of the clothing should be marked according to the British style library standard 2. B523—2001
7, The distance between the specified parts of the ironing is the distance between the whole or the intersection of the chain. If necessary, it can be promoted to use 1,? The specified new handle is used to mark the measured parts on the garment. Note: If the installation is relatively light, the system must be careful when the national table measurement disk section is required. 7.2 When the inner fabrics are different, the two should be brushed separately: 7.1.3 Place the dirty garment in the position specified in GBS52 (then Chapter 5 is straightforward to let the cabinet see the heart. Note) 71.4 Place the reduction belt on the measuring table (43 stock coupons). 1.5 Take out the temporary closure of the garment. Mark the space between the key points on the star stock table: 7.1.6 Use a ruler (1.1 to push the mark over the same space between the parts, and record it to the nearest 13m.When measuring, do not perform unnecessary stretching. 1. The parts of clothing or parts that need to be tested must correspond to each other, such as two oils. 7.2 Measurement parts
72.1 The measurement parts of tops (including casual clothes, pajamas, shirts and inner length) are as follows:
) Collar length: The length of the collar at the collar: Note: You can use the key network technology
: The length of the front garment must be the length from the closest point to the shoulder intersection point; the length of the brush piece at the bottom of the shoulder:! Back piece length: The length of the back piece from the back collar seam to the middle of the back piece at ten o'clock, c) Lower length: The length of the drawer under the drawer: 1 Width: Connect the midpoint of the back collar and the midpoint of the bottom of the two drawers to measure the length of the back seam at half the distance, or the width of the shoulders between the two drawers:! Chest width: The width of the chest at the center of the forehead, at least half of the width of the chest at the point of the waist; h: None: At the intersection of the front and the seam, and the width of the waist at the length of the waist; 1) Whose width
7.2.2 Type of press fitting
Measurement location such as
) Front crotch: The front length from the waist to the intersection of the inner seam, excluding the head: top) Back crotch: The length of the intersection of the waist chain to the inner chain, No color refers to the head: c) the length: the length from the inner side of the intersection of the block chain to the test opening. If the card is short: the length from one block opening to another;
> Gack:
e> Pants or birth opening width:
1 rattan (middle elimination) density: the block whole intersection car book because the mouth single net from his width reason: the rules do not:: *) crotch feeling, the limit root width,
7. 2.3 For workwear, jumpsuits, overalls, one-piece swimsuits and other garments, the measurement parts shall be measured as specified in 7.2.1: 1) the length from the center of the front collar opening to the trouser joint or to the end of the trousers; 2) the length from the center of the back collar opening to the trouser joint. 7.2.4 The measurement parts shall be as follows: 1) the length from the bottom seam to the bottom edge, excluding the waistband, measured at the center of the back and the back: 3) the length from the bottom of the waistband to the bottom of the waistband ... , such as the mold of the brand, the length after hanging, the shrinkage after washing, the small exchange generally does not produce size changes 8: for special package types, it may be necessary to carry out external marking 9 sample processing and size measurement after processing Liu style sample washing and drying, find the first, the measurement of the test result
direct formula (1 calculation of the change rate:
In the formula, "··new size at ·
. After processing.
press /317 direct calculation result final rate of about 2.1. Recovery month "+" company represents elongation, so use \. "Number of shrinkage is calculated. 11 The test report shall include the following information: a) a) the abbreviation and year of this standard; b) identification and size of the test product; c) parts of the test product; d) size changes of the test products; for preparation, marking and measurement of test specimens with a width of less than mm (starting from A1), when the diameter, marking and measurement are less than n, the following method shall be used for detailed analysis. The width is less than 15\m\. The actual marking method is as specified in Figure A1. According to the width of the fabric, make one or more pairs of special marks in each sample in the length direction. The spacing between each pair of marks is not less than 30, and the sample side is not less than 0m in the length direction, and the width direction is less than 5mm. Each pair of marks should be separated so that the measurement can represent the entire test report. For example, the relevant agreement is recommended for the size of 2m250ml. Each pair of marks in the length and width direction, each pair of marks is 200mm, Cse
9 digits: nn
Purchase intention r (~·25mm fabric format accurate point mark as
Smoothness Gu mechanical sample measurement point mark
Figure A1 Accurate width weaving fast measurement point mark
1 Tao Jin
GB/T86282001
Prompt fat record
Fall mask, knitted Lin Yan, love, gloves weight measurement This type includes village pads, or pre-purchased military body clothing, women's crocheting, dirty underwear, and help or swimsuits in the corresponding parts. If the store belt is adjustable, it is best to scan the resistance section to measure the length B1-: The circumference of the bottom of the sling or part of the sling! Figure 132 ten! 1B1.2 The total length of the upper side of the sling or part of the sling (see Figure 11 in 1) Figure BT
Strapless bra
Figure H2 Bra
When there is a period of measurement to compare the type of limited installation, it is necessary to include the promise. When the opening is the following style, it is necessary to measure the length of the neck, including the end of the sling (see Figure 2 in C). These types are: 1.2.1 The sling is adjusted according to the rotten part of the sling as shown in Figure H3. , but the strap is a continuous piece of paper with no elasticity as shown in B. For garments with this structure, the circumference of the garment including the length of the shoulder straps is measured at the base (as shown in Figure B). 3. The width of the waistband at the center of the waist (as shown in Figure 2):
.4. The width of the front center of the waist (as shown in Figure 132). B1.5. The depth of the shoulder strap or the depth of the sleeve (as shown in Figure 133). B1.E. The distance between the two breasts when the garment is placed on a flat surface. This item is suitable for styles with a certain expectation or a predetermined basis. H1.7. The length of each breast is shown in Figure 2). B1.8 When the folded dirty garment is laid flat on the measuring table, the length along the horizontal line (in area 2) is measured. This item is applicable to garments without padding or unshaped parts: B1 The length of the strap is shown in Figure K. GR/T8523-2001. Figure B: The strap is a continuous fabric. Example H2 Knitted hosiery ( For socks, long socks, etc., the measurement should be agreed upon by the parties concerned. For short socks, the following measurements are made: 2.1 The length of the sock opening (see Figure 16): 2.2 The length of the sock opening from the opening to the third eye (see Figure 17). 2.3 The length of the sock heel, from the base of the sock to the center of the sock (see Figure 6, C). 2.4 The width of the sock from the middle of the sock heel to the base of the sock (see Figure 6, E). 2.5 The length of the sock heel from the base of the sock to the center of the sock (see Figure 17, E). The measurement points of the measurement points are: 3.1 The length of the old belt (see Figure 13, 4). 3.2 The length of the seam (see Figure 13, B).
B3.3 Width of mesh (B3 center):
B3.4 Total diameter (front ruler, in the figure).
E4 Gloves
In order to make the measurement easier, the value can be used to control the recovery during the measurement. .1 Length (see the figure
4.2 Thumb finger chain length (see the figure B in E) GT86282001
3 Length along the center line of the move (see the figure net),
called. .4 The width of the palm of the thumb joint three quality first Pavilion! In the middle. B.5 The fold at the whole part (in the figure
GT 8628-2001
Figure HS hand concubineIf the card is short: the length from one crotch to the other is 1;
> Gack:
e> Trouser leg or birth opening width:
1 Rattan part (middle opening) dense: crotch adjustment intersection car book because of the single net width of the crotch: regulations do not: *) crotch feeling, people limit the width of the root,
7.2.3 The shape of work clothes, jumpsuits, overalls. One-piece swimsuits and other types of clothing measurement parts are measured and adjusted within the regulations, and the lower grip is broken for 7.2.1:) The length from the center of the front collar bottom to the trouser joint or to the end of the crotch. d The length from the center of the back collar to the back collar. 7.2.4 The parts are as follows: a) The length from the bottom seam to the bottom edge, excluding the waistband, measured at the center of the back and the back: 3 h) The length of the hip joint, GR/T8628-2001, if there is a hip joint, it is below the waist, at least three points of the wear point. The measurement is based on the following points: a) Length: b) Width: 2. , such as the mold of the brand, the length after hanging, the shrinkage after washing, the small exchange generally does not produce size changes 8: for special package types, it may be necessary to carry out external marking 9 sample processing and size measurement after processing Liu style sample washing and drying, find the first, the measurement of the test result
direct formula (1 calculation of the change rate:
In the formula, "··new size at ·
. After processing.
press /317 direct calculation result final rate of about 2.1. Recovery month "+" company represents elongation, so use \. "Number of shrinkage is calculated. 11 The test report shall include the following information: a) a) the abbreviation and year of this standard; b) identification and size of the test product; c) parts of the test product; d) size changes of the test products; for preparation, marking and measurement of test specimens with a width of less than mm (starting from A1), when the diameter, marking and measurement are less than n, the following method shall be used for correction. The width is less than 15\m\. The actual marking method is as specified in Figure A1. According to the width of the fabric, make one or more pairs of special marks in each sample in the length direction. The spacing between each pair of marks is not less than 30, and the sample side is not less than 0m in the length direction, and the width direction is less than 5mm. Each pair of marks should be separated so that the measurement can represent the entire test report. For example, the relevant agreement is recommended for the size of 2m250ml. Each pair of marks in the length and width direction, each pair of marks is 200mm, Cse
9 digits: nn
Purchase intention r (~·25mm fabric format accurate point mark as
Smoothness Gu mechanical sample measurement point mark
Figure A1 Accurate width weaving fast measurement point mark
1 Tao Jin
GB/T86282001
Prompt fat record
Fall mask, knitted Lin Yan, love, gloves weight measurement This type includes village pads, or pre-purchased military body clothing, women's crocheting, dirty underwear, and help or swimsuits in the corresponding parts. If the store belt is adjustable, it is best to scan the resistance section to measure the length B1-: The circumference of the bottom of the sling or part of the sling! Figure 132 ten! 1B1.2 The total length of the upper side of the sling or part of the sling (see Figure 11 in 1) Figure BT
Strapless bra
Figure H2 Bra
When there is a period of measurement to compare the type of limited installation, it is necessary to include the promise. When the opening is the following style, it is necessary to measure the length of the neck, including the end of the sling (see Figure 2 in C). These types are: 1.2.1 The sling is adjusted according to the rotten part of the sling as shown in Figure H3. , but the strap is a continuous piece of paper with no elasticity as shown in B. For garments with this structure, the circumference of the garment including the length of the shoulder straps is measured at the base (as shown in Figure B). 3. The width of the waistband at the center of the waist (as shown in Figure 2):
.4. The width of the front center of the waist (as shown in Figure 132). B1.5. The depth of the shoulder strap or the depth of the sleeve (as shown in Figure 133). B1.E. The distance between the two breasts when the garment is placed on a flat surface. This item is suitable for styles with a certain expectation or a predetermined basis. H1.7. The length of each breast is shown in Figure 2). B1.8 When the folded dirty garment is laid flat on the measuring table, the length along the horizontal line (in area 2) is measured. This item is applicable to garments without padding or unshaped parts: B1 The length of the strap is shown in Figure K. GR/T8523-2001. Figure B: The strap is a continuous fabric. Example H2 Knitted hosiery ( For socks, long socks, etc., the measurement should be agreed upon by the parties concerned. For short socks, the following measurements are made: 2.1 The length of the sock opening (see Figure 16): 2.2 The length of the sock opening from the opening to the third eye (see Figure 17). 2.3 The length of the sock heel, from the base of the sock to the center of the sock (see Figure 6, C). 2.4 The width of the sock from the middle of the sock heel to the base of the sock (see Figure 6, E). 2.5 The length of the sock heel from the base of the sock to the center of the sock (see Figure 17, E). The measurement points of the measurement points are: 3.1 The length of the old belt (see Figure 13, 4). 3.2 The length of the seam (see Figure 13, B).
B3.3 Width of mesh (B3 center):
B3.4 Total diameter (front ruler, in the figure).
E4 Gloves
In order to make the measurement easier, the value can be used to control the recovery during the measurement. .1 Length (see the figure
4.2 Thumb finger chain length (see the figure B in E) GT86282001
3 Length along the center line of the move (see the figure net),
called. .4 The width of the palm of the thumb joint three quality first Pavilion! In the middle. B.5 The fold at the whole part (in the figure
GT 8628-2001
Figure HS hand concubineIf the card is short: the length from one crotch to the other is 1;
> Gack:
e> Trouser leg or birth opening width:
1 Rattan part (middle opening) dense: crotch adjustment intersection car book because of the single net width of the crotch: regulations do not: *) crotch feeling, people limit the width of the root,
7.2.3 The shape of work clothes, jumpsuits, overalls. One-piece swimsuits and other types of clothing measurement parts are measured and adjusted within the regulations, and the lower grip is broken for 7.2.1:) The length from the center of the front collar bottom to the trouser joint or to the end of the crotch. d The length from the center of the back collar to the back collar. 7.2.4 The parts are as follows: a) The length from the bottom seam to the bottom edge, excluding the waistband, measured at the center of the back and the back: 3 h) The length of the hip joint, GR/T8628-2001, if there is a hip joint, it is below the waist, at least three points of the wear point. The measurement is based on the following points: a) Length: b) Width: 2. , such as the mold of the brand, the length after hanging, the shrinkage after washing, the small exchange generally does not produce size changes 8: for special package types, it may be necessary to carry out external marking 9 sample processing and size measurement after processing Liu style sample washing and drying, find the first, the measurement of the test result
direct formula (1 calculation of the change rate:
In the formula, "··new size at ·
. After processing.
press /317 direct calculation result final rate of about 2.1. Recovery month "+" company represents elongation, so use \. "Number of shrinkage is calculated. 11 The test report shall include the following information: a) a) the abbreviation and year of this standard; b) identification and size of the test product; c) parts of the test product; d) size changes of the test products; for preparation, marking and measurement of test specimens with a width of less than mm (starting from A1), when the diameter, marking and measurement are less than n, the following method shall be used for detailed analysis. The width is less than 15\m\. The actual marking method is as specified in Figure A1. According to the width of the fabric, make one or more pairs of special marks in each sample in the length direction. The spacing between each pair of marks is not less than 30, and the sample side is not less than 0m in the length direction and less than 5mm in the width direction. Each pair of marks should be separated so that the measurement can represent the entire test report. For example, the relevant agreement is recommended for the size of 2m250ml. Each pair of marks in the length and width direction, each pair of marks is 200mm, Cse
9 digits: nn
Purchase intention r (~·25mm fabric format accurate point mark as
Smoothness Gu mechanical sample measurement point mark
Figure A1 Accurate width weaving fast measurement point mark
1 Tao Jin
GB/T86282001
Prompt fat record
Fall cover, knitted Lin Yan, love, gloves weight measurement This type includes village pads, or pre-purchased military body clothing, women's crocheting, dirty underwear, and help or swimsuits in the corresponding parts. If the store belt is adjustable, it is best to scan the resistance section to measure the length B1-: The circumference of the bottom of the sling or part of the sling! Figure 132 ten! 1B1.2 The total length of the upper side of the sling or part of the sling (see Figure 11 in 1) Figure BT
Strapless bra
Figure H2 Bra with straps
When the measurement is compared with the type of limited equipment, it is necessary to include the promise. When the opening is the following style, it is necessary to measure the length of the neck, including the end of the sling (see Figure 2 in C). These types are: 1.2.1 The sling is adjusted according to the rotten part of the sling as shown in Figure H3. , but the strap is a continuous piece of paper with no elasticity as shown in B. For garments with this structure, the circumference of the garment including the length of the shoulder straps is measured at the base (as shown in Figure B). 3. The width of the waistband at the center of the waist (as shown in Figure 2):
.4. The width of the front center of the waist (as shown in Figure 132). B1.5. The depth of the shoulder strap or the depth of the sleeve (as shown in Figure 133). B1.E. The distance between the two breasts when the garment is placed on a flat surface. This item is suitable for styles with a certain expectation or a predetermined basis. H1.7. The length of each breast is shown in Figure 2). B1.8 When the folded dirty garment is laid flat on the measuring table, the length along the horizontal line (in area 2) is measured. This item is applicable to garments without padding or unshaped parts: B1 The length of the strap is shown in Figure K. GR/T8523-2001. Figure B: The strap is a continuous fabric. Example H2 Knitted hosiery ( For socks, long socks, etc., the measurement should be agreed upon by the parties concerned. For short socks, the following measurements are made: 2.1 The length of the sock opening (see Figure 16): 2.2 The length of the sock opening from the opening to the third eye (see Figure 17). 2.3 The length of the sock heel, from the base of the sock to the center of the sock (see Figure 6, C). 2.4 The width of the sock from the middle of the sock heel to the base of the sock (see Figure 6, E). 2.5 The length of the sock heel from the base of the sock to the center of the sock (see Figure 17, E). The measurement points of the measurement points are: 3.1 The length of the old belt (see Figure 13, 4). 3.2 The length of the seam (see Figure 13, B).
B3.3 Width of mesh (B3 center):
B3.4 Total diameter (front ruler, in the figure).
E4 Gloves
In order to make the measurement easier, the value can be used to control the recovery during the measurement. .1 Length (see the figure
4.2 Thumb finger chain length (see the figure B in E) GT86282001
3 Length along the center line of the move (see the figure net),
called. .4 The width of the palm of the thumb joint three quality first Pavilion! In the middle. B.5 The fold at the whole part (in the figure
GT 8628-2001
Figure HS hand concubineEach pair of marks in the length and width direction, each pair of marks is 200mm, Cse
9 digits: nn
Purchase intention r(~·25mm fabric format accurate point mark as
Smoothness Gu mechanical sample measurement point mark
Figure A1 Accurate width weaving fast measurement point mark
1 Taojin
GB/T86282001
Prompt fat record
Fall This category includes weight measurement of hoodies, knitwear, underwear, gloves, or pre-ordered military bodysuits, women's underwear, and the corresponding parts of the top or swimsuit. If the store strap is adjustable, it is best to scan the length of the section to measure the price, or mark the section B1-: The circumference of the bottom of the strap or the part! Figure 132 Ten! 1B1.2 The full length of the upper edge of the strip rate or the structure rate part (see Figure 11 1) Figure BT
Bandless chest||t t|| Figure H2 Bras with Straps || tt|| When the length of the bra is limited, it is necessary to include the following. When the bra is of the following type, it is necessary to measure the length of the bra near the neck, including the end (see Figure 2 C). These types are: 1.2.1 Bras with straps as shown in Figure H3 and Figure T4 as shown in Figure B1.2.2 Bras with straps as shown in Figure B, but the straps are a continuous piece of paper with no elasticity. For garments with this structure, The circumference of the shoe including the length of the shoulder straps is measured at the base (see Figure B). 3. The width of the waistband at the center of the forelock (see Figure 13). B1.5 The depth of the sleeves or the depth of the sleeves (see Figure 13). B1.6 The distance between the breasts when the garment is placed on a flat surface. This item is suitable for styles that are expected or pre-determined. H1.7 The length of each breast is shown in Figure 2). B1.8 When the folded dirty garment is laid flat on the measuring table, the length along the horizontal line (in area 2) is measured. This item is applicable to garments without padding or unshaped parts: B1 The length of the strap is shown in Figure K. GR/T8523-2001. Figure B: The strap is a continuous fabric. Example H2 Knitted hosiery ( For socks, long socks, etc., the measurement should be agreed upon by the parties concerned. For short socks, the following measurements are made: 2.1 The length of the sock opening (see Figure 16): 2.2 The length of the sock opening from the opening to the third eye (see Figure 17). 2.3 The length of the sock heel, from the base of the sock to the center of the sock (see Figure 6, C). 2.4 The width of the sock from the middle of the sock heel to the base of the sock (see Figure 6, E). 2.5 The length of the sock heel from the base of the sock to the center of the sock (see Figure 17, E). The measurement points of the measurement points are: 3.1 The length of the old belt (see Figure 13, 4). 3.2 The length of the seam (see Figure 13, B).
B3.3 Width of mesh (B3 center):
B3.4 Total diameter (front ruler, in the figure).
E4 Gloves
In order to make the measurement easier, the value can be used to control the recovery during the measurement. .1 Length (see the figure
4.2 Thumb finger length (see the figure B in E) GT86282001
3 Length along the center line of the move (see the figure net),
called. .4 The width of the palm of the thumb joint three quality first Pavilion! In the middle. B.5 The fold at the whole part (in the figure
GT 8628-2001
Figure HS hand concubineEach pair of marks in the length and width direction, each pair of marks is 200mm, Cse
9 digits: nn
Purchase intention r(~·25mm fabric format accurate point mark as
Smoothness Gu mechanical sample measurement point mark
Figure A1 Accurate width weaving fast measurement point mark
1 Taojin
GB/T86282001
Prompt fat record
Fall This category includes weight measurement of hoodies, knitwear, underwear, gloves, or pre-ordered military bodysuits, women's underwear, and the corresponding parts of the top or swimsuit. If the store strap is adjustable, it is best to scan the length of the section to measure the price, or mark the section B1-: The circumference of the bottom of the strap or the part! Figure 132 Ten! 1B1.2 The full length of the upper edge of the strip rate or the structure rate part (see Figure 11 1) Figure BT
Bandless chest||t t|| Figure H2 Bras with Straps || tt|| When the length of the bra is limited, it is necessary to include the following. When the bra is of the following type, it is necessary to measure the length of the bra near the neck, including the end (see Figure 2 C). These types are: 1.2.1 Bras with straps as shown in Figure H3 and Figure T4 as shown in Figure B1.2.2 Bras with straps as shown in Figure B, but the straps are a continuous piece of paper with no elasticity. For garments with this structure, The circumference of the shoe including the length of the shoulder straps is measured at the base (see Figure B). 3. The width of the waistband at the center of the forelock (see Figure 13). B1.5 The depth of the sleeves or the depth of the sleeves (see Figure 13). B1.6 The distance between the breasts when the garment is placed on a flat surface. This item is suitable for styles that are expected or pre-determined. H1.7 The length of each breast is shown in Figure 2). B1.8 When the folded dirty garment is laid flat on the measuring table, the length along the horizontal line (in area 2) is measured. This item is applicable to garments without padding or unshaped parts: B1 The length of the strap is shown in Figure K. GR/T8523-2001. Figure B: The strap is a continuous fabric. Example H2 Knitted hosiery ( For socks, long socks, etc., the measurement should be agreed upon by the parties concerned. For short socks, the following measurements are made: 2.1 The length of the sock opening (see Figure 16): 2.2 The length of the sock opening from the opening to the third eye (see Figure 17). 2.3 The length of the sock heel, from the base of the sock to the center of the sock (see Figure 6, C). 2.4 The width of the sock from the middle of the sock heel to the base of the sock (see Figure 6, E). 2.5 The length of the sock heel from the base of the sock to the center of the sock (see Figure 17, E). The measurement points of the measurement points are: 3.1 The length of the old belt (see Figure 13, 4). 3.2 The length of the seam (see Figure 13, B).
B3.3 Width of mesh (B3 center):
B3.4 Total diameter (front ruler, in the figure).
E4 Gloves www.bzxz.net
In order to make the measurement easier, the value can be used to control the recovery during the measurement. .1 Length (see the figure
4.2 Thumb finger length (see the figure B in E) GT86282001
3 Length along the center line of the move (see the figure net),
called. .4 The width of the palm of the thumb joint three quality first Pavilion! In the middle. B.5 The fold at the whole part (in the figure
GT 8628-2001
Figure HS hand concubine
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.