This method specifies the method for determining the color fastness of textiles to olefins and hot inorganic acids (such as acids used in mild felting processes in the hat and felting industries). GB/T 8436-1998 Textiles - Tests for color fastness - Color fastness to felting: mild GB/T8436-1998 Standard download decompression password: www.bzxz.net

J Heart s_59.030.30
National Standard of the People's Republic of China
GB/T8426·8427-1998
CB/T 8429--8431
GB/T 8433-8441—1998
Textiles
Color fastness test
Textiles-Tests for color fastness1998-11-26 Issued
1999-05-01 Implementation
National Quality Technical Supervision Bureau
GB/T 84361998
This standard is based on 1S105-E14:1994 Color fastness test for thread products Part F13: Acid inclusion color fastness, mild 3. It is revised to GB/T8436--1387, and the revised content is equivalent to 1S105-E12:1994. The following contents of GB/T2436957 are revised: 1. According to GB/1.1-1333 and 1995.1.12, the cover, title, and writing format are revised. The preface is added. 2. The preface is written according to 1$010, and the query is compared with Chapter 3. The introduction is added to Chapter 2, and the length is changed to mn.
Cancel the entry A
5. Add the main content of the test report
This standard is a reference standard for single-fiber fabrics. The density of single fiber is g/m2. The fabric sample is a short edge. This standard will be replaced by G/T8436-1987 from the date of implementation. This standard is proposed by China Textile and Apparel Council. This standard is jointly drafted by the Basic Standards Committee of the Standardization Committee of China Textile and Apparel Council, Beijing Wool Textile Research Institute, Shanghai Feima Textile Science and Technology Research Institute and Shanghai Textile Industry Technical Supervision Institute. The drafters of this standard are Yi Jinxing, Wang Xiaojian, Chao Li, Zheng Deng and Qi Yamin. This standard was first issued in 1987 and revised for the first time in 1998. GB/T B4361998 ISO Foreword ISO (International Organization for Standardization) is an international organization that connects national standard organizations with ISO members. 1. Preparation of the standard 1. Work is conducted within the ISC (International Standardization Technical Committee). All members have an interest in the items that the technical committee has sponsored, and the test committee has the authority to approve the international organization. It is also possible to contact the IS to obtain cooperation. 1S0 shall be in contact with the International Committee () in all matters of electronic technology standardization. The international single black black technical committee adopts the technical vote to pass on to members. 75% of the second-rate formula is published as an international standard. The international standard 1015-F14 was prepared by TS0/TC58/:1 Textile Technical Committee, Colored Textiles and Sheet Materials Testing Subcommittee. This third edition was prepared as a technical reference, and the second edition (1SC10 5-E12:1987)IS) has recently been issued 13 \parts" each part is marked with the word "each" (such as \\part>, service 4 is 181985. Each part is also enclosed in a series of abbreviations", each falling into the corresponding part and indicated by a two-digit series effect number (that is A91\article": These parts have now been branched into industry editions, and their original light ~ part "each end remains unchanged, M) [U5-A07 Mountain has recorded all the daily figures 1 model figure
National Standard of the People's Republic of China
Color fastness test
Textiles
Acid resistance felt color fastness: mild
Textiles -Tests tnr cnlour fastness-Colour fantress tn acid-felting: Mild GB/T 8436—1998
eqy150105-F14.1994
#GBTB3887
This formula specifies the color fastness of certain pharmaceutical products, and changes the effect of inorganic acid! In the process of manufacturing and containing fat industry and philosophy platform,
2 Reference standards
The provisions contained in the following standards constitute the body of this standard through reference in this standard. The versions shown in this standard are valid at the time of edition. All standard parts will be revised. All parties using this standard should explore the applicability of the following new points of technology. G 233--1991
Assessment of color change strip sample idt15105-A92139 Assessment of active color gray file card idtS0106-A231993GB251:1995
GB/T E151-—193T
General rules for color half-degree test (eg[5010-:154>Textiles
GB75641987
Gh 735.1987
GB75S51987
CB 7567—J87
GB75691987
woven fabrics
red products
textiles
anti-woven fabrics
GR-1403-1989
woven fabrics
3 Principle
Color fastness testwwW.bzxz.Net
wool standard sticker group material specification (CIS) 65-F01.19x) color fastness range riding
cotton dynamic adhesive standard sticker standard (n61) 125-F02: 1982) color fastness test
Standard fabric specification for patchwork (ISO105FJ4:1982) Color fastness test
Damage test
Color fastness test
Standard fabric specification for patchwork (M[0115-F05:1932) Silk standard fabric specification cVIS)65-F05:182) Standard patchwork specification (NE9150-25-F03:1984) Test: Put other patchwork fabrics together, put them in a toxic solution for shrinkage, then wash and dry. 4.1 Suitable container with a flat end and glass with a corresponding mechanical surface (such as medium resistance to color change test), 4.2 Sulfuric acid: 1ml per liter. Method (density 1.1Fm.) 4.3 Paste fabric, each 1Um>129am, decide to use the standard lining material, see the piece as needed or for wool standard clear for special fabric or for ten types of fiber label village texture for evaluation of color staining (see Chapter 2): 5 test sample
5.1 Add The sample is made of material, this 40mm%03mm test piece is placed between two pieces of adhesive material (4.3), and a short side is combined to form a short test sample. CB/T6436-1998 3.2 If the sample is made into a line, the fabric will be connected to 5.1 and a thin layer will be added in the longitudinal direction to the two pieces of adhesive material (1.3). The sand is used as half of the total mass of the two adhesive materials. The edges are combined and the missing line is appropriate to form a platform group.
5.3 Samples are well woven, collected about half of the total mass of the patch (4.3), and pressed into a full layer of 40m×153mm. Between the two pasting fabrics, the active four-step combination is combined to make the fiber seam fixed and form a combined sample. 6 Working procedure
61 The group now test is changed to 60+2 acid Ze Qian (1.2) The bath ratio is /0.16.7. If possible, use the peach shrinkage bone that can be obtained for the next shrinkage to shrink (.1) 63 Ding worker: In the shrinkage system, use the glass pusher to continuously lift the combination test country, and the production is 2m ugly every time. 6-4 Stop squeezing the test sample once but do not remove it. Rinse the waxed combined sample with running cold water for 10 minutes. Remove all the remaining seams except for one short one (if necessary, there is a loose thread). Hang the combined sample in the air at less than 60 degrees to dry. 6.5 Use the color sample card to determine the color of the sample and the staining of the adjacent fabric. The test report should include the following: 1. The sieve number of this standard is B/T8436-198:51. The sample is now in the format! 2. The color change of the test group is the same as that of the various village fabrics.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.