Some standard content:
Engineering Construction Standards Full-text Information System
Ministry Standards of the Ministry of Construction of the People's Republic of China
Urban Gas and Heat Workers
Technical Grade Standards
CJJ24—89
Engineering Construction Standards Full-text Information System
Engineering Construction Standards Full-text Information System
Ministry Standards of the Ministry of Construction of the People's Republic of China
Technical Grade Standards for Urban Gas and Heat WorkersCJJ
24—89
Editor: Personnel Department of the Ministry of Construction of the People's Republic of ChinaApproval Department: Ministry of Construction of the People's Republic of ChinaEffective Date: October 1, 1889
Engineering Construction Standards Full-text Information System
kANiKAca
Engineering Construction Standards Full-text Information System
Notice on the Release of Ministry Standards "Technical Grade Standards for Urban Survey and Survey Workers" and Eight Other Workers' Technical Grade Standards (89) Jianbiaozi No. No. 135
In accordance with the requirements of Document No. (88) Chengbiaozi No. 141 of the former Ministry of Urban and Rural Construction and Environmental Protection, eight technical grade standards for workers, including the "Technical Grade Standards for Urban Survey and Survey Workers" compiled by the Labor and Wage Bureau of the former Ministry of Urban and Rural Construction and Environmental Protection, have been reviewed by our ministry and are now approved as departmental standards, with numbers respectively as "Technical Grade Standards for Urban Survey and Survey Workers" CJJ19-89, "Technical Grade Standards for Urban Gardening Workers" CJJ120-89, "Technical Grade Standards for Ancient Building Construction Workers" CJJ21-89, "Technical Grade Standards for Urban Public Transport Workers" CJJ22-89, "Technical Grade Standards for Workers in Urban Water Supply Industry" CJJ23-89, "Technical Grade Standards for Urban Gas and Heat Workers" CJJ14-89, "Technical Grade Standards for Sanitation Workers" CJJ25-89, and "Technical Grade Standards for Housing Construction Workers" CJJ26-89, and will be implemented from October 1, 1989. If you have any questions or comments during the implementation process, please inform the Personnel Department of the Ministry of Construction.
This standard is published by China Architecture & Building Press. The "Technical Grade Standards for Urban Gas and Heat Workers" (Trial), "Technical Grade Standards for House Repair Workers" (Trial), "Technical Grade Standards for Gardeners" (Trial), and "Technical Grade Standards for Urban Water Supply Workers" (Trial) issued by the former State Administration of Urban Construction in 1979 will cease to be implemented from October 1, 1989. Ministry of Construction of the People's Republic of China
March 25, 1989
Engineering Construction Standards Full Text Information System
Engineering Construction Standards Full Text Information System
Chapter 1
Chapter 2
Technical Standards for Mechanical Gas Generators (Blower, Furnace Body, Ash Discharge)
Chapter 3
Technical Standards for Carbonization Furnaces (Furnace Top, Coke Discharger, etc.) Water Gas Furnaces (Automatic Machine, Coal Adding, Grate Drive, Ash Discharge) Chapter 4
, etc.) Technical Standards
Technical Standards for Coal Blending (Crushing, Screening, Drying) Chapter 5
Chapter 6
Technical Standards for Coking Coal Gasifier (Rising Pipe, Furnace Cover, Outlet, Scale, Residual Coal Hoist, Smoke Elimination, etc.) Chapter 7
Technical Standards for Heavy Oil Gasification (Operation Room, Hydraulic Control, Furnace Body, etc.) Chapter 8
Desulfurization (Dry Desulfurization, Circulation Pump, Air Compressor, Regeneration, Molten Sulfur Kettle, Centrifuge, etc.) Technical standards…
Technical standards for benzene removal (benzene absorption, distillation, final cooling, naphthalene removal, etc.) Chapter 9
Technical standards for phenol removal (biological phenol removal)
Chapter 10
Chapter 11 Technical standards for condensation and air blowing (condensation pump room, primary cooler, blower driver)·
Chapter 12
Technical standards for gas transportation (operation and management of pressure equipment, operation and management of gas cabinets, gas metering at the factory (station)) Chapter 13
Gas pipeline Technical standards for workers ·
Chapter 14
Chapter 15
Technical standards for pressure regulators ·
Technical standards for indoor gas maintenance workers
Chapter 16
Technical standards for operators in liquefied petroleum gas tank areasChapter 17
Chapter 18
Technical standards for liquefied petroleum gas mechanical filling workersLiquid petroleum gas mechanical equipment repair (fitters, welders, pipe workers)Full text information system of engineering construction standards
TKAONT KAca-
Engineering Construction Standard Full Text Information System
Technical Standards for Maintenance Workers (Liquid Petroleum Gas Cylinder Maintenance (Cylinder Maintenance, Angle Valve Maintenance))
Chapter 19
Technical Standards for Boiler Operators
Chapter 21
Chapter 22
Chapter 23
Chapter 24
Chapter 25
Chapter 26
Chapter 27
Chapter 28
Technical Standards for Steam Turbine Operators
Technical Standards for Testing (Water, Coal, Ash) Workers
Technical Standards for Thermal Instrument Workers
Technical Standards for Steam Turbine Repairers
|Technical standards for thermal pipe workers
Technical standards for thermal operation workers
Technical standards for liquefied petroleum gas cylinder manufacturing workers Technical standards for gas appliance manufacturing (civil and corporate appliance manufacturing, special appliance manufacturing, appliance inspection, new product development, etc.) workers
Gas meter decoration (civil and industrial gas meter manufacturing and repair and calibration, new meter development workers' technical standards Appendix A few explanations of this standard·
Engineering Construction Standard Full Text Information System
Engineering Construction Standard Full Text Information System
Chapter 1 General Provisions
Article 1.0.1 This standard is formulated to encourage workers to learn technology, improve their technical level, organize production reasonably, further implement the principle of distribution according to work, and better complete the safe supply and high-quality service work in the urban gas and thermal power industries. Article 1.0.2 This standard applies to the assessment of technical grades of professional jobs such as gas production, storage, transportation, distribution, maintenance and special equipment manufacturing in the city gas industry and heat source and heating professional jobs in the thermal industry.
Article 1.0.3 The types of work not included in this standard and the specific implementation measures for implementation shall be formulated by the public utilities authorities of provinces, autonomous regions, municipalities directly under the central government and cities with independent planning status.
Engineering Construction Standards Full Text Information System
kANiKAca
Engineering Construction Standards Full Text Information System
Chapter 2 Technical Standards for Mechanical Gas Generators (Blower, Furnace Body, Ashing) Workers
Section 1 Junior Workers
Article 2.1.1 What Junior Workers Should Know
1. The name, type, specification, performance, structure, use rules and maintenance methods of mechanical generators and furnace body ancillary equipment. 2. Type, structure, function, use rules and maintenance methods of coal char transportation and ash removal equipment.
3. Type, specification, performance, use rules and maintenance methods of fans, water pumps and purification and cooling equipment.
4. Lubrication requirements for the transmission parts of self-use equipment. 5. Name, specification, purpose, use and maintenance methods of self-use operating tools and measuring tools.
6. Layout of various process pipelines and process flow of gas generating stations. 7. Operating parameters (pressure, temperature, flow, speed, etc.) of various equipment in the generator system and their adjustment methods.
8. Name, specification, purpose and use rules of instruments (pressure gauge, temperature gauge, flow meter) in the generator system.
9. Type, specification, structure and use of valves in the generator system. 10. Type, properties and general technical requirements of coal char used in the generator. 11. Basic knowledge of the gas generation process in the generator. 12. Properties, composition and use of generator gas, general knowledge of gas calorific value. 13. Various economic and technical indicators of the generator system. 14. Causes and troubleshooting methods of common faults in the generator production process. 15. General electrical knowledge and the names, uses and usage regulations of the electrical devices of this system Engineering Construction Standard Full Text Information System
Engineering Construction Standard Full Text Information System
16. Basic knowledge of fitter.
17. General knowledge of reading drawings.
18. Safety technical regulations, fire prevention, explosion prevention, anti-poisoning knowledge and first aid knowledge of this type of work. Article 2.1.2 Junior workers should be able to
1. Correctly operate and maintain the self-use gas generator and its auxiliary equipment, purification and cooling equipment, fans, water pumps, valves, etc. 2. Correctly use self-use tools.
3. According to the operating requirements, skillfully perform normal operations such as adding coke, detecting fire, passing carbon, placing ash, draining and changing water of jackets, and starting and stopping operations of blowers. 4. Correctly read the indications of the instruments. Accurately fill in the operation records. 5. Judge whether production is normal or not according to the fire detection results, instrument indications or test results, and make timely and correct adjustments or eliminate common faults. 6.Under the guidance, perform the operations of charging, ignition, shutdown, and ash cleaning of the generator. 7. Under unified command, correctly handle process accidents such as water outage, power outage, and gas outage, and coordinate and cooperate well between various positions. 8. Under unified command, correctly perform special operations such as parallel operation of furnaces and equipment replacement.
9. Understand the process flow chart of this system.
10. Correctly implement safety technical regulations, first aid for gas poisoning, and correct use of fire-fighting equipment.
11. Basic fitter operations, handling of general leakage of self-use equipment (such as replacing sealing packing, re-tightening packing glands, re-tightening flanges, minor repairs of small-diameter pipelines, etc.). 12. Achieve various requirements of post responsibility system and civilized production. Section 2 Intermediate Workers
Article 2.2.1 Intermediate Workers Should Know
1. The basic principles of generator gas production and various factors affecting generator gasification.
2. Analysis and calculation methods of main technical and economic indicators, gas heat and ash carbon content.
TKAONT KAca-
Engineering Construction Standard Full Text Information System
3. Basic theoretical knowledge of generator gas cooling, pressurization and purification, and determination and control methods of various process parameters.
4. Measurement and control principles of instruments used in generators. 5. Working principles of hydraulic devices and mechanical transmission devices of generators. 6. Coordination and cooperation relationship and requirements between this type of work and other types of work in production. 7. Comprehensive knowledge of gas supply, gas stoppage and equipment replacement of generators. 8. Causes, preventive measures and treatment methods of various accidents in this system. 9. Names, grades and properties of commonly used metal materials, and material grades of main parts of generators.
10. Basic knowledge of mechanical drawing.
11.Quality requirements for repair of generator equipment, equipment major, medium and minor repair cycles and their contents, as well as acceptance and commissioning methods.
12.Basic knowledge of compiling gas safety technical regulations and process operation procedures. 13.The dynamics of dual innovation and economic and technical indicators of similar domestic equipment, and methods to improve gas production and quality and reduce various consumption. 14.Performance and characteristics of other types of generators in China. 15.The names, contents, quantities and national standards of harmful substances emitted by generators.
16.Knowledge of production technology management of teams.
Article 2.2.2 Intermediate workers should be able to
1.Be proficient in operating various positions of this type of work and guide junior workers to operate. 2.Organize and direct the opening, gas supply, gas stoppage, parallel operation of furnaces, equipment replacement, and rescue and handling of gas fires, poisoning, explosions and various accidents in this system. 3. Comprehensively and timely adjust the production and operation parameters such as blower pressure, saturation temperature, grate speed, etc. according to the operation conditions and load changes. 4. Correctly judge and promptly handle various abnormal phenomena in production to eliminate potential accidents.
5. Understand the assembly drawings of the generator and its auxiliary equipment and other process equipment. 6. Draw the flow chart of this system and each process system (gas, air, water, etc.) Engineering Construction Standard Full Text Information System Engineering Construction Standard Full Text Information System
and simple equipment parts drawings.
7. Propose the content of major, medium and minor repairs of the equipment in this system, and the quality appraisal and acceptance test after the equipment maintenance.
8. Analyze technical and economic indicators, quality, equipment and process accidents. 9. Disassemble and repair general pipelines and equipment parts (such as fire detection hole seats, etc.).
Section 3
Senior Worker
Article 2.3.1 What Senior Workers Should Know
1. General knowledge of various test and analysis methods and calculations in the gas production process. 2. General knowledge of the determination and calculation of materials and energy balance in the generator system. 3. New processes and technologies for domestic solid fuel gasification. 4. Technical transformation and installation and construction knowledge of major process equipment and pipelines. 5. Environmental protection knowledge, control and treatment methods for emissions of harmful substances (including noise).
6. Knowledge of gas production scheduling.
Article 2.3.2 What Senior Workers Should Know
1. Guide the installation and quality acceptance of newly built generator equipment and pipelines, and organize trial runs and production.
2. Based on the problems existing in the production of this system, propose preliminary plans for the technical transformation of gas equipment and process pipelines.
3. Solve various technical problems in the gas production process and propose effective improvement measures for key production.
4. Prepare safety technical regulations and process operation procedures for gas production. 5. Organize and guide the test work of new processes and technologies for solid fuel gasification. 6. Process calculations such as material balance and heat energy balance. 7. Draw simple process design drawings and equipment schematics. Engineering Construction Standards Full-text Information System
KANTKAca
Engineering Construction Standards Full-text Information System
Chapter 3 Carbonization Furnace (Furnace Top, Coke Remover, etc.) Engineering Technical Standards Section 1
Municipal Junior Workers
Article 3.1.1 What Junior Workers Should Know
1. The name, type, specification, performance, simple structure, use rules and maintenance methods of the auxiliary equipment of the carbonization furnace body. 2. The name, purpose and use of common tools used in carbonization furnace production. 3. The production process of carbonization furnaces and the layout of various process pipelines. 4. Various process indicators for carbonization furnace production. 5. The significance of regulating and controlling the pressure on the furnace top, the significance of the coke spacing and the speed, and their relationship.
6. The simple principle of the gas generation process in the carbonization furnace. 7. The types, properties and general technical requirements of the raw coal for the carbonization furnace. 8. General knowledge of the composition and calorific value of the carbonization furnace gas. 9. Knowledge of equipment lubrication.
10. The causes and troubleshooting methods of common faults in the production process of the carbonization furnace (including water, power and gas outages).
11. Basic knowledge of fitter.
12. Knowledge of safe use of electricity.
13. Safety operating procedures, fire prevention, explosion prevention, anti-toxic knowledge and first aid common sense. Article 3.1.2 Junior workers should be able to
1. Correctly operate and maintain the auxiliary equipment of the carbonization furnace. 2. Correctly use common tools.
3. Be proficient in basic operations of this position (ramming furnace, adding coal, clearing gas riser, etc.), and keep the furnace in normal production according to the process index requirements. 4. Determine whether the production in the furnace is normal based on the color and speed of the gas. 5. Discover and deal with abnormal conditions such as pressure fluctuations of the furnace top gas, coal loss, and unilateral movement in the production furnace.
6. Correctly implement safety and technical operating procedures. 7. Meet the requirements of the post responsibility system and civilized production. Section 2 Intermediate Workers
Article 3.2.1 Intermediate Workers Should Know
1. The working principle, structure, use and maintenance methods of the coke discharge transmission machinery. 2. The control method of the furnace top pressure, the structure, working principle, use and maintenance methods of the hydraulic regulator and the automatic safety relief valve of the gas main. 3. The general structure and main dimensions of the carbonization furnace body, and the functions of various parts of the carbonization furnace. 4. Knowledge of refractory materials, types and characteristics of refractory materials for the masonry of carbonization furnace.
5. Quality requirements for the installation of auxiliary equipment of carbonization furnace. 6. Factors affecting the life of carbonization furnace. 7. The significance of burning scale in the carbonization chamber and precautions for burning coal scale. 8. The principle of coal dry distillation and the process of carbonization coal gas production. 9. The influence of furnace bottom steam on coking, gasification and coal scale formation in the furnace. 10. The physical and chemical properties of coal, the relationship between carbonization furnace production and raw coal quality (raw coal composition, humidity, particle size, cohesiveness, expansion). 11. Ways to improve the gas production capacity of carbonization furnace. 12. The influence of operation on the quality of cooked coal and other chemical products. 13. The coordination and cooperation relationship between the production process of this type of work and other related types of work. 14. The causes of various faults in the production process of carbonization furnace, and the treatment and prevention methods.
15. Basic knowledge of drawing reading.
16. Knowledge of compiling safety technical regulations and process operation procedures. 17. Technical and economic indicators of similar furnaces in the same range and the dynamics of dual innovation, and methods to reduce consumption.
18. Knowledge of production technology management of the team.
Article 3.2.2 Intermediate workers should know
Full text information system of engineering construction standards
TKAONTKAca-Meet the requirements of the post responsibility system and civilized production. Section 2 Intermediate Workers
Article 2.2.1 Intermediate Workers Should Know
1. The basic principles of gas production in generators and various factors affecting gasification in generators.
2. Analysis and calculation methods of main technical and economic indicators, gas heat, and ash carbon content.
TKAONT KAca-
Engineering Construction Standards Full Text Information System
3. Basic theoretical knowledge of cooling, pressurizing, and purification of generator gas, and determination and control methods of various process parameters.
4. Measurement and control principles of instruments used in generators. 5. Working principles of hydraulic devices and mechanical transmission devices of generators. 6. Coordination and cooperation relationships and requirements between this type of work and other types of work in production. 7. Comprehensive knowledge of gas supply, gas stoppage, and equipment replacement in generators. 8. Causes, preventive measures, and treatment methods of various accidents in this system. 9. The names, grades and properties of commonly used metal materials, and the material grades of the main parts of the generator.
10. Basic knowledge of mechanical drawing.
11. Quality requirements for the repair of generator equipment, the major, medium and minor repair cycles of equipment and their contents, as well as the acceptance and commissioning methods.
12. Basic knowledge of compiling gas safety technical regulations and process operation procedures. 13. The dual innovation dynamics and economic and technical indicators of similar domestic equipment, and methods to improve gas production and quality and reduce various consumption. 14. The performance and characteristics of other types of generators in China. 15. The names, contents, quantities and national standards of harmful substances emitted by the generator.
16. Knowledge of production technology management of the team.
Article 2.2.2 Intermediate workers should be able to
1. Be proficient in operating various positions of this type of work and guide junior workers to operate. 2. Organize and direct the opening, gas supply, gas stop, parallel operation of furnaces, equipment replacement, and rescue and handling of gas fire, poisoning, explosion and various accidents of this system. 3. Comprehensively and timely adjust the production and operation parameters such as blower pressure, saturation temperature, grate speed, etc. according to the operation conditions and load changes. 4. Correctly judge and promptly handle various abnormal phenomena in production to eliminate potential accidents.
5. Understand the assembly drawings of the generator and its auxiliary equipment and other process equipment. 6. Draw the flow charts of this system and various process systems (gas, air, water, etc.) Engineering Construction Standard Full Text Information System Engineering Construction Standard Full Text Information System
and simple equipment parts drawings.
7. Propose the content of major, medium and minor repairs of the equipment of this system, and the quality appraisal and acceptance test after the equipment maintenance.
8. Analyze technical and economic indicators, quality, equipment and process accidents. 9. Disassemble and repair general pipelines and equipment parts (such as fire detection hole seats, etc.).
Section 3
Senior Worker
Article 2.3.1 What Senior Workers Should Know
1. General knowledge of various test and analysis methods and calculations in the gas production process. 2. General knowledge of the determination and calculation of materials and energy balance in the generator system. 3. New processes and technologies for domestic solid fuel gasification. 4. Technical transformation and installation and construction knowledge of major process equipment and pipelines. 5. Environmental protection knowledge, control and treatment methods for emissions of harmful substances (including noise).
6. Knowledge of gas production scheduling.
Article 2.3.2 What Senior Workers Should Know
1. Guide the installation and quality acceptance of newly built generator equipment and pipelines, and organize trial runs and production.
2. Based on the problems existing in the production of this system, propose preliminary plans for the technical transformation of gas equipment and process pipelines.
3. Solve various technical problems in the gas production process and propose effective improvement measures for key production.
4. Prepare safety technical regulations and process operation procedures for gas production. 5. Organize and guide the test work of new processes and technologies for solid fuel gasification. 6. Process calculations such as material balance and heat energy balance. 7. Draw simple process design drawings and equipment schematics. Engineering Construction Standards Full-text Information System
KANTKAca
Engineering Construction Standards Full-text Information System
Chapter 3 Carbonization Furnace (Furnace Top, Coke Remover, etc.) Engineering Technical Standards Section 1
Municipal Junior Workers
Article 3.1.1 What Junior Workers Should Know
1. The name, type, specification, performance, simple structure, use rules and maintenance methods of the auxiliary equipment of the carbonization furnace body. 2. The name, purpose and use of common tools used in carbonization furnace production. 3. The production process of carbonization furnaces and the layout of various process pipelines. 4. Various process indicators for carbonization furnace production. 5. The significance of regulating and controlling the pressure on the furnace top, the significance of the coke spacing and the speed, and their relationship.
6. The simple principle of the gas generation process in the carbonization furnace. 7. The types, properties and general technical requirements of the raw coal for the carbonization furnace. 8. General knowledge of the composition and calorific value of the carbonization furnace gas. 9. Knowledge of equipment lubrication.
10. The causes and troubleshooting methods of common faults in the production process of the carbonization furnace (including water, power and gas outages).
11. Basic knowledge of fitter.
12. Knowledge of safe use of electricity. bZxz.net
13. Safety operating procedures, fire prevention, explosion prevention, anti-toxic knowledge and first aid common sense. Article 3.1.2 Junior workers should be able to
1. Correctly operate and maintain the auxiliary equipment of the carbonization furnace. 2. Correctly use common tools.
3. Be proficient in basic operations of this position (ramming furnace, adding coal, clearing gas riser, etc.), and keep the furnace in normal production according to the process index requirements. 4. Determine whether the production in the furnace is normal based on the color and speed of the gas. 5. Discover and deal with abnormal conditions such as pressure fluctuations of the furnace top gas, coal loss, and unilateral movement in the production furnace.
6. Correctly implement safety and technical operating procedures. 7. Meet the requirements of the post responsibility system and civilized production. Section 2 Intermediate Workers
Article 3.2.1 Intermediate Workers Should Know
1. The working principle, structure, use and maintenance methods of the coke discharge transmission machinery. 2. The control method of the furnace top pressure, the structure, working principle, use and maintenance methods of the hydraulic regulator and the automatic safety relief valve of the gas main. 3. The general structure and main dimensions of the carbonization furnace body, and the functions of various parts of the carbonization furnace. 4. Knowledge of refractory materials, types and characteristics of refractory materials for the masonry of carbonization furnace.
5. Quality requirements for the installation of auxiliary equipment of carbonization furnace. 6. Factors affecting the life of carbonization furnace. 7. The significance of burning scale in the carbonization chamber and precautions for burning coal scale. 8. The principle of coal dry distillation and the process of carbonization coal gas production. 9. The influence of furnace bottom steam on coking, gasification and coal scale formation in the furnace. 10. The physical and chemical properties of coal, the relationship between carbonization furnace production and raw coal quality (raw coal composition, humidity, particle size, cohesiveness, expansion). 11. Ways to improve the gas production capacity of carbonization furnace. 12. The influence of operation on the quality of cooked coal and other chemical products. 13. The coordination and cooperation relationship between the production process of this type of work and other related types of work. 14. The causes of various faults in the production process of carbonization furnace, and the treatment and prevention methods.
15. Basic knowledge of drawing reading.
16. Knowledge of compiling safety technical regulations and process operation procedures. 17. Technical and economic indicators of similar furnaces in the same range and the dynamics of dual innovation, and methods to reduce consumption.
18. Knowledge of production technology management of the team.
Article 3.2.2 Intermediate workers should know
Full text information system of engineering construction standards
TKAONTKAca-Meet the requirements of the post responsibility system and civilized production. Section 2 Intermediate Workers
Article 2.2.1 Intermediate Workers Should Know
1. The basic principles of gas production in generators and various factors affecting gasification in generators.
2. Analysis and calculation methods of main technical and economic indicators, gas heat, and ash carbon content.
TKAONT KAca-
Engineering Construction Standards Full Text Information System
3. Basic theoretical knowledge of cooling, pressurizing, and purification of generator gas, and determination and control methods of various process parameters.
4. Measurement and control principles of instruments used in generators. 5. Working principles of hydraulic devices and mechanical transmission devices of generators. 6. Coordination and cooperation relationships and requirements between this type of work and other types of work in production. 7. Comprehensive knowledge of gas supply, gas stoppage, and equipment replacement in generators. 8. Causes, preventive measures, and treatment methods of various accidents in this system. 9. The names, grades and properties of commonly used metal materials, and the material grades of the main parts of the generator.
10. Basic knowledge of mechanical drawing.
11. Quality requirements for the repair of generator equipment, the major, medium and minor repair cycles of equipment and their contents, as well as the acceptance and commissioning methods.
12. Basic knowledge of compiling gas safety technical regulations and process operation procedures. 13. The dual innovation dynamics and economic and technical indicators of similar domestic equipment, and methods to improve gas production and quality and reduce various consumption. 14. The performance and characteristics of other types of generators in China. 15. The names, contents, quantities and national standards of harmful substances emitted by the generator.
16. Knowledge of production technology management of the team.
Article 2.2.2 Intermediate workers should be able to
1. Be proficient in operating various positions of this type of work and guide junior workers to operate. 2. Organize and direct the opening, gas supply, gas stop, parallel operation of furnaces, equipment replacement, and rescue and handling of gas fire, poisoning, explosion and various accidents of this system. 3. Comprehensively and timely adjust the production and operation parameters such as blower pressure, saturation temperature, grate speed, etc. according to the operation conditions and load changes. 4. Correctly judge and promptly handle various abnormal phenomena in production to eliminate potential accidents.
5. Understand the assembly drawings of the generator and its auxiliary equipment and other process equipment. 6. Draw the flow charts of this system and various process systems (gas, air, water, etc.) Engineering Construction Standard Full Text Information System Engineering Construction Standard Full Text Information System
and simple equipment parts drawings.
7. Propose the content of major, medium and minor repairs of the equipment of this system, and the quality appraisal and acceptance test after the equipment maintenance.
8. Analyze technical and economic indicators, quality, equipment and process accidents. 9. Disassemble and repair general pipelines and equipment parts (such as fire detection hole seats, etc.).
Section 3
Senior Worker
Article 2.3.1 What Senior Workers Should Know
1. General knowledge of various test and analysis methods and calculations in the gas production process. 2. General knowledge of the determination and calculation of materials and energy balance in the generator system. 3. New processes and technologies for domestic solid fuel gasification. 4. Technical transformation and installation and construction knowledge of major process equipment and pipelines. 5. Environmental protection knowledge, control and treatment methods for emissions of harmful substances (including noise).
6. Knowledge of gas production scheduling.
Article 2.3.2 What Senior Workers Should Know
1. Guide the installation and quality acceptance of newly built generator equipment and pipelines, and organize trial runs and production.
2. Based on the problems existing in the production of this system, propose preliminary plans for the technical transformation of gas equipment and process pipelines.
3. Solve various technical problems in the gas production process and propose effective improvement measures for key production.
4. Prepare safety technical regulations and process operation procedures for gas production. 5. Organize and guide the test work of new processes and technologies for solid fuel gasification. 6. Process calculations such as material balance and heat energy balance. 7. Draw simple process design drawings and equipment schematics. Engineering Construction Standards Full-text Information System
KANTKAca
Engineering Construction Standards Full-text Information System
Chapter 3 Carbonization Furnace (Furnace Top, Coke Remover, etc.) Engineering Technical Standards Section 1
Municipal Junior Workers
Article 3.1.1 What Junior Workers Should Know
1. The name, type, specification, performance, simple structure, use rules and maintenance methods of the auxiliary equipment of the carbonization furnace body. 2. The name, purpose and use of common tools used in carbonization furnace production. 3. The production process of carbonization furnaces and the layout of various process pipelines. 4. Various process indicators for carbonization furnace production. 5. The significance of regulating and controlling the pressure on the furnace top, the significance of the coke spacing and the speed, and their relationship.
6. The simple principle of the gas generation process in the carbonization furnace. 7. The types, properties and general technical requirements of the raw coal for the carbonization furnace. 8. General knowledge of the composition and calorific value of the carbonization furnace gas. 9. Knowledge of equipment lubrication.
10. The causes and troubleshooting methods of common faults in the production process of the carbonization furnace (including water, power and gas outages).
11. Basic knowledge of fitter.
12. Knowledge of safe use of electricity.
13. Safety operating procedures, fire prevention, explosion prevention, anti-toxic knowledge and first aid common sense. Article 3.1.2 Junior workers should be able to
1. Correctly operate and maintain the auxiliary equipment of the carbonization furnace. 2. Correctly use common tools.
3. Be proficient in basic operations of this position (ramming furnace, adding coal, clearing gas riser, etc.), and keep the furnace in normal production according to the process index requirements. 4. Determine whether the production in the furnace is normal based on the color and speed of the gas. 5. Discover and deal with abnormal conditions such as pressure fluctuations of the furnace top gas, coal loss, and unilateral movement in the production furnace.
6. Correctly implement safety and technical operating procedures. 7. Meet the requirements of the post responsibility system and civilized production. Section 2 Intermediate Workers
Article 3.2.1 Intermediate Workers Should Know
1. The working principle, structure, use and maintenance methods of the coke discharge transmission machinery. 2. The control method of the furnace top pressure, the structure, working principle, use and maintenance methods of the hydraulic regulator and the automatic safety relief valve of the gas main. 3. The general structure and main dimensions of the carbonization furnace body, and the functions of various parts of the carbonization furnace. 4. Knowledge of refractory materials, types and characteristics of refractory materials for the masonry of carbonization furnace.
5. Quality requirements for the installation of auxiliary equipment of carbonization furnace. 6. Factors affecting the life of carbonization furnace. 7. The significance of burning scale in the carbonization chamber and precautions for burning coal scale. 8. The principle of coal dry distillation and the process of carbonization coal gas production. 9. The influence of furnace bottom steam on coking, gasification and coal scale formation in the furnace. 10. The physical and chemical properties of coal, the relationship between carbonization furnace production and raw coal quality (raw coal composition, humidity, particle size, cohesiveness, expansion). 11. Ways to improve the gas production capacity of carbonization furnace. 12. The influence of operation on the quality of cooked coal and other chemical products. 13. The coordination and cooperation relationship between the production process of this type of work and other related types of work. 14. The causes of various faults in the production process of carbonization furnace, and the treatment and prevention methods.
15. Basic knowledge of drawing reading.
16. Knowledge of compiling safety technical regulations and process operation procedures. 17. Technical and economic indicators of similar furnaces in the same range and the dynamics of dual innovation, and methods to reduce consumption.
18. Knowledge of production technology management of the team.
Article 3.2.2 Intermediate workers should know
Full text information system of engineering construction standards
TKAONTKAca-Basic knowledge of compiling gas safety technical regulations and process operation procedures. 13. The dynamics of dual innovation and economic and technical indicators of similar domestic equipment, methods to improve gas production, quality and reduce various consumption. 14. The performance and characteristics of other types of generators in China. 15. The name, content, quantity and national standards of harmful substances emitted by the generator.
16. Knowledge of production technology management of the team.
Article 2.2.2 Intermediate workers should be able to
1. Proficiently perform various post operations of this type of work and guide junior workers to operate. 2. Organize and direct the opening, gas supply, gas stop, parallel operation of the furnace, equipment replacement and rescue and handling of gas fire, poisoning, explosion and various accidents of this system. 3. Comprehensively and timely adjust the production and operation parameters such as blower pressure, saturation temperature, grate speed, etc. according to the operation conditions and load changes. 4. Correctly judge and promptly handle various abnormal phenomena in production to eliminate potential accidents.
5. Understand the assembly drawings of the generator and its ancillary equipment and other process equipment. 6. Draw the flow charts of this system and each process system (gas, air, water, etc.) Engineering Construction Standard Full Text Information System Engineering Construction Standard Full Text Information System
Engineering Construction Standard Full Text Information System
and simple equipment parts drawings.
7. Propose the content of major, medium and minor repairs of the equipment in this system, and the quality appraisal and acceptance test after the equipment overhaul.
8. Analyze technical and economic indicators, quality, equipment and process accidents. 9. Disassemble and repair general pipelines and equipment parts (such as fire detection hole seats, etc.).
Section 3
Senior Worker
Article 2.3.1 What Senior Workers Should Know
1. General knowledge of various laboratory analysis methods and calculations in the gas production process. 2. General knowledge of the determination and calculation of material and energy balance of the generator system. 3. New processes and technologies for domestic solid fuel gasification. 4. Technical transformation and installation and construction knowledge of main process equipment and pipelines. 5. Environmental protection knowledge, control and treatment methods of harmful substances (including noise) emissions.
6. Knowledge of gas production scheduling.
Article 2.3.2 Senior workers should be able to
1. Guide the installation and quality acceptance of new generator equipment and pipelines, and organize trial operation and production.
2. Combined with the problems existing in the production of this system, propose a preliminary plan for the technical transformation of gas equipment and process pipelines.
3. Solve various technical problems in the gas production process and propose effective improvement measures for key production.
4. Prepare safety technical regulations and process operation procedures for gas production. 5. Organize and guide the test work of new processes and technologies for solid fuel gasification. 6. Process calculations such as material balance and heat energy balance. 7. Draw simple process design drawings and equipment schematics. Engineering Construction Standard Full Text Information System
KANTKAca
Engineering Construction Standard Full Text Information System
Chapter 3 Technical Standards for Carbonization Furnace (Furnace Top, Coke Discharge Machine, etc.) Section 1
Municipal Junior Workers
Article 3.1.1 What Junior Workers Should Know
1. The name, type, specification, performance, simple structure, use rules and maintenance methods of the auxiliary equipment of the carbonization furnace body. 2. The name, purpose and use method of the commonly used tools in the production of carbonization furnaces. 3. The production process of carbonization furnaces and the layout of various process pipelines. 4. Various process indicators of carbonization furnace production. 5. The significance of regulating and controlling the furnace top pressure, the significance and relationship between the coke discharge spacing and the speed.
6. The simple principle of the gas generation process in the carbonization furnace. 7. The types, properties and general technical requirements of the raw coal used in the carbonization furnace. 8. General knowledge of the composition and calorific value of the carbonization furnace gas. 9. Knowledge of equipment lubrication.
10. Causes and troubleshooting methods of common faults in the production process of carbonization furnace (including water, power and gas outages, etc.).
11. Basic knowledge of fitter.
12. Knowledge of safe use of electricity.
13. Safety operating procedures, fire prevention, explosion prevention, anti-toxic knowledge and first aid common sense. Article 3.1.2 Junior workers should be able to
1. Correctly operate and maintain the auxiliary equipment of carbonization furnace. 2. Correctly use common tools.
3. Proficiently perform basic operations of this position (ramming furnace, adding coal, clearing gas riser, etc.), and keep the furnace in normal production according to process indicators. 4. Determine whether the production in the furnace is normal based on the color and speed of the gas. 5. Discover and deal with abnormal conditions such as pressure fluctuations of the furnace top gas, coal removal, and unilateral movement in the production furnace.
6. Correctly implement the safety and technical operation procedures. 7. Meet the requirements of the post responsibility system and civilized production. Section 2 Intermediate Workers
Article 3.2.1 Intermediate Workers Should Know
1. The working principle, structure, use and maintenance methods of the coke discharge transmission machinery. 2. The control method of the furnace top pressure, the structure, working principle, use and maintenance methods of the hydraulic regulator and the automatic safety relief valve of the gas main. 3. The general structure and main dimensions of the carbonization furnace body, and the functions of each part of the carbonization furnace. 4. Knowledge of refractory materials, the types and characteristics of refractory materials for the masonry of the carbonization furnace body.
5. Quality requirements for the installation of auxiliary equipment of the carbonization furnace. 6. Factors affecting the life of the carbonization furnace body. 7. The significance of burning scale in the carbonization chamber and precautions for burning coal scale. 8. The principle of coal distillation and the process of carbonization coal gas production. 9. The influence of furnace bottom steam on coking, gas production and coal scale formation in the furnace. 10. Physical and chemical properties of coal, the relationship between carbonization furnace production and raw coal quality (raw coal composition, humidity, particle size, cohesiveness, expansion). 11. Ways to improve the gas production capacity of carbonization furnaces. 12. The impact of operation on the quality of cooked coal and other chemical products. 13. The coordination and cooperation between the production process of this type of work and other related types of work. 14. The causes, treatment and prevention methods of various faults in the production process of carbonization furnaces.
15. Basic knowledge of reading drawings.
16. Knowledge of compiling safety technical regulations and process operation procedures. 17. Technical and economic indicators of similar furnace types in the range and dual innovation trends, methods to reduce consumption.
18. Knowledge of production technology management of teams.
Article 3.2.2 Intermediate workers should know
Engineering Construction Standard Full Text Information System
TKAONTKAca-Basic knowledge of compiling gas safety technical regulations and process operation procedures. 13. The dynamics of dual innovation and economic and technical indicators of similar domestic equipment, methods to improve gas production, quality and reduce various consumption. 14. The performance and characteristics of other types of generators in China. 15. The name, content, quantity and national standards of harmful substances emitted by the generator.
16. Knowledge of production technology management of the team.
Article 2.2.2 Intermediate workers should be able to
1. Proficiently perform various post operations of this type of work and guide junior workers to operate. 2. Organize and direct the opening, gas supply, gas stop, parallel operation of the furnace, equipment replacement and rescue and handling of gas fire, poisoning, explosion and various accidents of this system. 3. Comprehensively and timely adjust the production and operation parameters such as blower pressure, saturation temperature, grate speed, etc. according to the operation conditions and load changes. 4. Correctly judge and promptly handle various abnormal phenomena in production to eliminate potential accidents.
5. Understand the assembly drawings of the generator and its ancillary equipment and other process equipment. 6. Draw the flow charts of this system and each process system (gas, air, water, etc.) Engineering Construction Standard Full Text Information System Engineering Construction Standard Full Text Information System
Engineering Construction Standard Full Text Information System
and simple equipment parts drawings.
7. Propose the content of major, medium and minor repairs of the equipment in this system, and the quality appraisal and acceptance test after the equipment overhaul.
8. Analyze technical and economic indicators, quality, equipment and process accidents. 9. Disassemble and repair general pipelines and equipment parts (such as fire detection hole seats, etc.).
Section 3
Senior Worker
Article 2.3.1 What Senior Workers Should Know
1. General knowledge of various laboratory analysis methods and calculations in the gas production process. 2. General knowledge of the determination and calculation of material and energy balance of the generator system. 3. New processes and technologies for domestic solid fuel gasification. 4. Technical transformation and installation and construction knowledge of main process equipment and pipelines. 5. Environmental protection knowledge, control and treatment methods of harmful substances (including noise) emissions.
6. Knowledge of gas production scheduling.
Article 2.3.2 Senior workers should be able to
1. Guide the installation and quality acceptance of new generator equipment and pipelines, and organize trial operation and production.
2. Combined with the problems existing in the production of this system, propose a preliminary plan for the technical transformation of gas equipment and process pipelines.
3. Solve various technical problems in the gas production process and propose effective improvement measures for key production.
4. Prepare safety technical regulations and process operation procedures for gas production. 5. Organize and guide the test work of new processes and technologies for solid fuel gasification. 6. Process calculations such as material balance and heat energy balance. 7. Draw simple process design drawings and equipment schematics. Engineering Construction Standard Full Text Information System
KANTKAca
Engineering Construction Standard Full Text Information System
Chapter 3 Technical Standards for Carbonization Furnace (Furnace Top, Coke Discharge Machine, etc.) Section 1
Municipal Junior Workers
Article 3.1.1 What Junior Workers Should Know
1. The name, type, specification, performance, simple structure, use rules and maintenance methods of the auxiliary equipment of the carbonization furnace body. 2. The name, purpose and use method of the commonly used tools in the production of carbonization furnaces. 3. The production process of carbonization furnaces and the layout of various process pipelines. 4. Various process indicators of carbonization furnace production. 5. The significance of regulating and controlling the furnace top pressure, the significance and relationship between the coke discharge spacing and the speed.
6. The simple principle of the gas generation process in the carbonization furnace. 7. The types, properties and general technical requirements of the raw coal used in the carbonization furnace. 8. General knowledge of the composition and calorific value of the carbonization furnace gas. 9. Knowledge of equipment lubrication.
10. Causes and troubleshooting methods of common faults in the production process of carbonization furnace (including water, power and gas outages, etc.).
11. Basic knowledge of fitter.
12. Knowledge of safe use of electricity.
13. Safety operating procedures, fire prevention, explosion prevention, anti-toxic knowledge and first aid common sense. Article 3.1.2 Junior workers should be able to
1. Correctly operate and maintain the auxiliary equipment of carbonization furnace. 2. Correctly use common tools.
3. Proficiently perform basic operations of this position (ramming furnace, adding coal, clearing gas riser, etc.), and keep the furnace in normal production according to process indicators. 4. Determine whether the production in the furnace is normal based on the color and speed of the gas. 5. Discover and deal with abnormal conditions such as pressure fluctuations of the furnace top gas, coal removal, and unilateral movement in the production furnace.
6. Correctly implement the safety and technical operation procedures. 7. Meet the requirements of the post responsibility system and civilized production. Section 2 Intermediate Workers
Article 3.2.1 Intermediate Workers Should Know
1. The working principle, structure, use and maintenance methods of the coke discharge transmission machinery. 2. The control method of the furnace top pressure, the structure, working principle, use and maintenance methods of the hydraulic regulator and the automatic safety relief valve of the gas main. 3. The general structure and main dimensions of the carbonization furnace body, and the functions of each part of the carbonization furnace. 4. Knowledge of refractory materials, the types and characteristics of refractory materials for the masonry of the carbonization furnace body.
5. Quality requirements for the installation of auxiliary equipment of the carbonization furnace. 6. Factors affecting the life of the carbonization furnace body. 7. The significance of burning scale in the carbonization chamber and precautions for burning coal scale. 8. The principle of coal distillation and the process of carbonization coal gas production. 9. The influence of furnace bottom steam on coking, gas production and coal scale formation in the furnace. 10. Physical and chemical properties of coal, the relationship between carbonization furnace production and raw coal quality (raw coal composition, humidity, particle size, cohesiveness, expansion). 11. Ways to improve the gas production capacity of carbonization furnaces. 12. The impact of operation on the quality of cooked coal and other chemical products. 13. The coordination and cooperation between the production process of this type of work and other related types of work. 14. The causes, treatment and prevention methods of various faults in the production process of carbonization furnaces.
15. Basic knowledge of reading drawings.
16. Knowledge of compiling safety technical regulations and process operation procedures. 17. Technical and economic indicators of similar furnace types in the range and dual innovation trends, methods to reduce consumption.
18. Knowledge of production technology management of teams.
Article 3.2.2 Intermediate workers should know
Engineering Construction Standard Full Text Information System
TKAONTKAca-Prepare safety technical regulations and process operation procedures for coal gas production. 5. Organize and guide the test work of new processes and technologies for solid fuel gasification. 6. Process calculations such as material balance and heat energy balance. 7. Draw simple process design drawings and equipment schematics. Engineering Construction Standard Full Text Information System
KANTKAca
Engineering Construction Standard Full Text Information System
Chapter 3 Carbonization Furnace (Furnace Top, Coke Discharge Machine, etc.) Technical Standards Section 1
Municipal Junior Workers
Article 3.1.1 What Junior Workers Should Know
1. The name, type, specification, performance, simple structure, use rules and maintenance methods of the auxiliary equipment of the carbonization furnace body. 2. The name, purpose and use methods of commonly used tools for carbonization furnace production. 3. The process flow of carbonization furnace production and the layout of various process pipelines. 4. Various process indicators of carbonization furnace production. 5. The significance of defining and controlling the furnace top pressure, the significance and relationship between the coke discharge spacing and the travel speed.
6. Simple principles of the gas generation process in the carbonization furnace. 7. Types, properties and general technical requirements of raw coal for carbonization furnace. 8. General knowledge of the composition and calorific value of carbonization furnace gas. 9. Knowledge of equipment lubrication.
10. Causes and troubleshooting methods of common faults in the production process of the carbonization furnace (including water outage, power outage, gas outage, etc.).
11. Basic knowledge of fitter.
12. Knowledge of safe use of electricity.
13. Safety operating procedures, fire prevention, explosion prevention, anti-toxic knowledge and first aid common sense. Article 3.1.2 Junior workers should be able to
1. Correctly operate and maintain the auxiliary equipment of the carbonization furnace. 2. Correctly use common tools.
3. Proficiently perform basic operations of this position (ramming the furnace, adding coal, clearing the riser, etc.), and keep the furnace in normal production according to the process indicators. 4. Judge whether the production in the furnace is normal based on the color and speed of the gas. 5. Discover and deal with abnormal conditions such as pressure fluctuations of the furnace top gas, coal loss, and unilateral movement that are common in production furnaces.
6. Correctly implement safety and technical operating procedures. 7. Meet the requirements of the post responsibility system and civilized production. Section 2 Intermediate Workers
Article 3.2.1 Intermediate Workers Should Know
1. The working principle, structure, use and maintenance methods of the coke discharge transmission machinery. 2. The control method of the furnace top pressure, the structure, working principle, use and maintenance methods of the hydraulic regulator and the automatic safety relief valve of the gas main. 3. The general structure and main dimensions of the carbonization furnace body, and the functions of various parts of the carbonization furnace. 4. Knowledge of refractory materials, the varieties and characteristics of refractory materials for the masonry of the carbonization furnace body.
5. Quality requirements for the installation of auxiliary equipment of the carbonization furnace. 6. Factors affecting the life of the carbonization furnace body. 7. The significance of burning scale in the carbonization chamber and the precautions for burning coal scale. 8. The principle of coal distillation and the process of carbonization coal gas production. 9. The influence of furnace bottom steam on coking, gasification and coal scale formation in the furnace. 10. The physical and chemical properties of coal, the relationship between carbonization furnace production and raw coal quality (raw coal composition, humidity, particle size, cohesiveness, expansion). 11. Ways to improve the gas production capacity of the carbonization furnace. 12. The influence of operation on the quality of cooked coal and other chemical products. 13. The coordination and cooperation relationship between the production process of this type of work and other related types of work. 14. The causes of various faults in the production process of the carbonization furnace, and the treatment and prevention methods.
15. Basic knowledge of drawing recognition.
16. Knowledge of compiling safety technical regulations and process operation procedures. 17. The technical and economic indicators of similar furnace types in the range and the dynamics of dual innovation, and methods to reduce consumption.
18. Knowledge of production technology management of the team.
Article 3.2.2 Intermediate workers should know
Engineering construction standard full text information system
TKAONTKAca-Prepare safety technical regulations and process operation procedures for coal gas production. 5. Organize and guide the test work of new processes and technologies for solid fuel gasification. 6. Process calculations such as material balance and heat energy balance. 7. Draw simple process design drawings and equipment schematics. Engineering Construction Standard Full Text Information System
KANTKAca
Engineering Construction Standard Full Text Information System
Chapter 3 Carbonization Furnace (Furnace Top, Coke Discharge Machine, etc.) Technical Standards Section 1
Municipal Junior Workers
Article 3.1.1 What Junior Workers Should Know
1. The name, type, specification, performance, simple structure, use rules and maintenance methods of the auxiliary equipment of the carbonization furnace body. 2. The name, purpose and use methods of commonly used tools for carbonization furnace production. 3. The process flow of carbonization furnace production and the layout of various process pipelines. 4. Various process indicators of carbonization furnace production. 5. The significance of defining and controlling the furnace top pressure, the significance and relationship between the coke discharge spacing and the travel speed.
6. Simple principles of the gas generation process in the carbonization furnace. 7. Types, properties and general technical requirements of raw coal for carbonization furnace. 8. General knowledge of the composition and calorific value of carbonization furnace gas. 9. Knowledge of equipment lubrication.
10. Causes and troubleshooting methods of common faults in the production process of the carbonization furnace (including water outage, power outage, gas outage, etc.).
11. Basic knowledge of fitter.
12. Knowledge of safe use of electricity.
13. Safety operating procedures, fire prevention, explosion prevention, anti-toxic knowledge and first aid common sense. Article 3.1.2 Junior workers should be able to
1. Correctly operate and maintain the auxiliary equipment of the carbonization furnace. 2. Correctly use common tools.
3. Proficiently perform basic operations of this position (ramming the furnace, adding coal, clearing the riser, etc.), and keep the furnace in normal production according to the process indicators. 4. Judge whether the production in the furnace is normal based on the color and speed of the gas. 5. Discover and deal with abnormal conditions such as pressure fluctuations of the furnace top gas, coal loss, and unilateral movement that are common in production furnaces.
6. Correctly implement safety and technical operating procedures. 7. Meet the requirements of the post responsibility system and civilized production. Section 2 Intermediate Workers
Article 3.2.1 Intermediate Workers Should Know
1. The working principle, structure, use and maintenance methods of the coke discharge transmission machinery. 2. The control method of the furnace top pressure, the structure, working principle, use and maintenance methods of the hydraulic regulator and the automatic safety relief valve of the gas main. 3. The general structure and main dimensions of the carbonization furnace body, and the functions of various parts of the carbonization furnace. 4. Knowledge of refractory materials, the varieties and characteristics of refractory materials for the masonry of the carbonization furnace body.
5. Quality requirements for the installation of auxiliary equipment of the carbonization furnace. 6. Factors affecting the life of the carbonization furnace body. 7. The si
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.