This standard specifies the nominal diameter and installation dimensions of starters for tractors and internal combustion engines. This standard applies to starters for tractors, agricultural transport vehicles and stationary internal combustion engines, and other similar machinery can also refer to it. JB/T 6699-1993 Installation dimensions of starters for tractors and internal combustion engines JB/T6699-1993 Standard download decompression password: www.bzxz.net

Machinery Industry Standard of the People's Republic of China
JB/T 6699-93
Starter for tractor and internal combustion engine
Installation dimensions
Published on July 29, 1993
Ministry of Machinery Industry of the People's Republic of China
Implemented on January 1, 1994
Mechanical Industry Standard of the People's Republic of China
Installation dimensions of starter for tractor and internal combustion engine Subject content and scope of application
JB/T6699-93
This standard specifies the nominal diameter and installation dimensions of starter for tractor and internal combustion engine. This standard is applicable to starter for tractor, agricultural transport vehicle and stationary internal combustion engine, and other similar machinery can also refer to it. Installation type and nominal diameter
The installation type is divided into type B and type C, and its nominal diameter is shown in Table 1. Table 1
Installation dimensions
Type B dimensions are shown in Figure 1 and Table 2.
3.2Type C dimensions are shown in Figure 2 and Table 3.
Approved by the Ministry of Machinery Industry on July 29, 1993
Implemented on January 1, 1994
Nominal diameter
Nominal diameter
Basic dimensions
Limit deviation
JB/T6699-93
Basic dimensionsbzxz.net
Figure 2Type C
Limit deviation
Additional notes:
JB/T6699-93
This standard was proposed by the National Technical Committee for Tractor Standardization. This standard is under the jurisdiction of the Luoyang Tractor Research Institute of the Ministry of Machinery Industry. This standard was drafted by Shanghai Automotive Electric Appliance Factory. The main drafters of this standard are He Zhonghui and Li Li. 3
People's Republic of China
Machinery Industry Standard
Installation Dimensions of Starters for Tractors and Internal Combustion Engines JB/T6699-93
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Postal Code 100081)
(P.O. Box 8144, Beijing
Copyright reserved
Reproduction is prohibited
Format 880×12301/16 Printing Sheet 3/8 Number of Words 4,000 First Edition December 1993 First Printing December 1993 Printing 00,000 1-500 Price RMB 1.50
No. 1225
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.