JB/T 9162.19-1999 Extension rod dimensions
Basic Information
Standard ID:
JB/T 9162.19-1999
Standard Name: Extension rod dimensions
Chinese Name:
接杆 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Introduction to standards:
JB/T 9162.19-1999 JB/T 9162.19-1999 Extension rod dimensions JB/T9162.19-1999 Standard download decompression password: www.bzxz.net
Some standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01www.bzxz.net
Machinery Industry Standard of the People's Republic of China
Eytension rod
Dimensions
This standard specifies the types and sizes of the supports, types and dimensions
Types and dimensions shall be specified in the following provisions.
-12mm, [6mm
National Machinery Industry Bureau approved Bao on May 20, 1999
.-.0.041
JB/T9162.19—1999
Generated ZB J44001.19-87
2000-01-01 implementation
Marking example:
Q-12mm,
JB Jin 912.19—1999
1-200mm connecting rod marking:
Connector pin 12×200JD/T9162.19—1999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.