GB/T 15756-1995 Limit dimensions of common threads

Basic Information

Standard ID: GB/T 15756-1995

Standard Name: Limit dimensions of common threads

Chinese Name: 普通螺纹极限尺寸

Standard category:National Standard (GB)

state:Abolished

Date of Release1995-01-01

Date of Implementation:1996-07-01

Date of Expiration:2009-02-01

standard classification number

Standard ICS number:Mechanical systems and general parts >> 21.040 thread

Standard Classification Number:Machinery>>General Machinery>>J04 Basic Standards and General Methods

associated standards

alternative situation:Replaced by GB/T 15756-2008

Procurement status:,

Publication information

publishing house:China Standards Press

Publication date:1996-07-01

other information

Release date:1995-11-23

Review date:2004-10-14

drafter:Li Xiaobin, Yu Yuan

Drafting unit:Standardization Institute of the Ministry of Machinery Industry

Focal point unit:National Thread Standardization Technical Committee

Proposing unit:Ministry of Machinery Industry of the People's Republic of China

Publishing department:State Bureau of Technical Supervision

competent authority:National Standardization Administration

Skip to download

Introduction to standards:

This standard specifies the limit sizes of common threads whose tooth profiles conform to GB 192, whose diameter and pitch series conform to the specifications on the upper left of the thick black line in the table of GB 193, and whose tolerances conform to GB 197. This standard applies to common common threads with nominal diameters of 1 to 300 mm and tolerance zones of 4H, 5H, 6H, 7H, 4h, 5h 6h, 6h, 6g, 6f, 6e, 8h or 8g. GB/T 15756-1995 Limit sizes of common threads GB/T15756-1995 Standard download decompression password: www.bzxz.net