This standard specifies the quality requirements, inspection methods and inspection rules for cabbage, hybrid cabbage, kohlrabi and cauliflower seeds. This standard applies to the production and sale of cabbage crop seeds. GB 16715.4-1999 Vegetable Crop Seeds Cabbage GB16715.4-1999 Standard Download Decompression Password: www.bzxz.net
This standard specifies the quality requirements, inspection methods and inspection rules for cabbage, hybrid cabbage, kohlrabi and cauliflower seeds. This standard applies to the production and sale of cabbage crop seeds.

GB16715.4—1999
In order to promote high-yield and high-quality products of excellent varieties in agricultural production, protect agricultural production, safeguard the interests of seed producers, operators and users, and promote seed trade, the quality standards of cabbage vegetable seeds are specially formulated and revised. Based on extensive investigation and a large number of experimental studies on the current status of cabbage seed quality in my country, this standard revises the quality standards of cabbage and cauliflower seeds in GB8079-1987 "Vegetable Seeds". At the same time, the seed quality standards of hybrid cabbage and bulb cabbage (Benzoline) are formulated. The standard items are still variety purity, seed cleanliness, germination rate and moisture. In this standard, the seed quality level is reduced, conventional seeds are not graded, and a standard value is set for each of the four indicators: purity, cleanliness, germination rate is set as the minimum indicator, and moisture is set as the maximum limit. Hybrid seeds are divided into two levels based on purity, and the other three items are the same as conventional seeds. Due to the changes in the inspection method and judgment standard, the germination rate is changed to the seedling identification method, so the revised value is reduced; the cleanliness adopts the rapid method, so the revised value is increased. The standard value of moisture content does not change much. This standard is proposed by the Ministry of Agriculture of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee for Standardization of Crop Seeds. The responsible drafting units of this standard are: National Agricultural Technology Extension Service Center, Hunan Seed Station, Tianjin Seed Station, Beijing Seed Station, Hebei Seed Station, Beijing Vegetable Seed Quality Inspection Center of the Ministry of Agriculture. The main drafters of this standard are: Zhang Shumin, Zhao Juying, Yang Shuhui, He Xiaoyan, Shuai Shurong, Zheng Xiaoru. This standard is entrusted to the National Agricultural Technology Extension Service Center of the Ministry of Agriculture for interpretation. 18
1 Scope
National Standard of the People's Republic of China
Seeds of gourd and vegetable -Cole vegetables
Cabbage
Seeds of gourd and vegetable -Cole vegetablesGB 16715. 4—1999
Replaces GB8079—1987
This standard specifies the quality requirements, inspection methods and inspection rules for cabbage, hybrid cabbage, kohlrabi and cauliflower seeds. This standard applies to the production and sale of cabbage seeds. 2 Referenced standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards are subject to revision. Parties using this standard should explore the possibility of using the latest version of the following standards: GB/T3543.1—1995 General rules for inspection of crop seeds GB/T 3543. 2—1995
GB/T3543.3—1995
GB/T 3543. 4-1995
Inspection procedures for crop seeds - Sampling
Inspection procedures for crop seeds
, purity analysis
Germination test
Inspection procedures for crop seeds
GB/T3543.5—1995 Inspection procedures for crop seeds, authenticity and variety purity identification
GB/T 3543. 6—1995
GB/T 7414—1987
GB/T 7415—1987
3 Definitions
Inspection procedures for crop seeds Determination of moisture
Packaging of main crop seeds
Storage of main crop seeds
This standard adopts the following definitions.
3.1 Basic seed
Seeds of the first to third generation propagated by breeder seeds or produced according to the basic seed production technical regulations that meet the basic seed quality standards. 3.2 Quality seed
Seeds of the first to third generation propagated by conventional basic seeds or hybrids that meet the quality standards of improved seeds. 4 Quality requirements
See Table 1 for the quality indicators of cabbage crop seeds. Approved by the State Administration of Quality and Technical Supervision on September 8, 1999, and implemented on February 1, 2000
Chenopod hybrids
Conventional varieties
Balsamic cabbage
Cabbage with floret
Packaging, transportation, storage and labeling
shall be carried out in accordance with GB/T7414 and GB/T7415.
6 Inspection methods
6.1 Sampling
shall be carried out in accordance with GB/T3543.2.
6.2 Purity analysis
shall be carried out in accordance with GB/T3543.3.
6.3 Germination testbzxZ.net
shall be carried out in accordance with GB/T3543.4.
6.4 Authenticity and variety purity identification
shall be carried out in accordance with GB/T3543.5.
6.5 Determination of moisture
According to GB/T3543.6.
7 Inspection rules
GB 16715. 4 -- 1999
Not low quality
Not low seed
Burial rate
Not low quality
The purity index of the variety is used as the basis for dividing the seed quality level. If the purity does not reach the original seed index, it will be downgraded to the first-grade seed, if it does not reach the first-grade seed, it will be downgraded to the second-grade seed, and if it does not reach the second-grade seed, it will be unqualified seed. One index is set for each of the purity, germination rate and moisture. If one of the indexes does not reach the index, it is unqualified seed. When comparing the measured values ​​of purity, purity and germination rate with the specified values ​​in the standard, the allowable error used for comparison with the specified values ​​in GB/T3543.1~3543.6-1995 will not be implemented for the time being.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.