This standard specifies the installation dimensions and additional requirements for forklift hook-type forks and fork carriages, so that forks or attachments can be interchanged with other attachments. These dimensions are related to the rated lifting capacity of the forklift and the type of fork. GB/T 5184-1996 Installation dimensions of forklift hook-type forks and fork carriages GB/T5184-1996 Standard download decompression password: www.bzxz.net

1cs_53.060
National Standard of the People's Republic of China
GB/T5184-1996
idt Iso 2328.1993bzxz.net
Hook-on type forks and fork carriages
Mounting dimensions
Fork-lift trucks-Hook-on type Fork arms and forkarm carriages-Mounting Issued on December 23, 1996
Implemented on July 1, 1997
State Administration of Technology Supervision
CB/T5184:1996
This standard is revised from GB519465 according to 1993. This standard is equivalent to 1993. In terms of technical content, compared with GB51885, it adds? Chapter 2 and 3, Table 1: and the analysis of the changes in Table 1 and Table 2. The rated load base has been increased by level 5. The level 4 has been changed accordingly. This standard will replace 1996-8584-5 from the date of its entry into force. This standard is proposed by the Ministry of Machinery Industry of the People's Republic of China. This standard is under the jurisdiction of Beijing Hoisting and Conveying Machinery Research Institute of the Ministry of Machinery Industry. The drafter of this standard is Xing Zhizhong, the organizer of this standard. , academic rock. GB/T51841996
1ISO (International Organization for Standardization) is an international federation of national standards organizations (ISO member bodies). The work of preparing international standards is usually carried out by ISO technical committees. Each member body interested in the subject of a technical change committee that has been established has the right to be represented in the committee. International organizations (both official and unofficial) that have links with ISO also participate in the work. ISO and IEC have close ties in all aspects of electrical standards.
Draft international standards adopted by technical committees should be circulated to member bodies for voting. When published as international standards, at least 7556 member bodies must be included in the voting. 1502328 was prepared by ISO/TC110T Industrial Truck Technical Committee 2 - Powered Industrial Truck Safety Requirements.
This second edition cancels and replaces the first (IS02328, 1977). The Level 4 column in Tables 1 and 2 has been expanded, and the Level 5 column has been newly added.
1 Scope
National Standard of the People's Republic of China
Forklift hook type fork arms and fork carriage mounting dimensions is GBr5184-1996
idtISo 2326:1993
Agency 18186
This standard specifies the installation dimensions of hook type fork carriages and fork carriages and some requirements such as the requirements for the connection of goods to the ground. These dimensions are related to the types of goods received by the vehicle. 2 References
The following provisions are included in the standard and constitute the provisions of this standard by reference in this standard. When the standard is reprinted, it is still valid. All markings will be revised. The parties using this standard should discuss the possibility of the latest international standard. GB G: 10-85 Type of forklift terminology (idt15 (2331-: 974) 3 Definitions
The terms in this standard comply with the provisions of GB514U. 4 Dimensions
The installation dimensions of type A and type B forklifts must be specified in Table 2 (see Figure 1). The dimensions specified in Table 2 should be divided into two on the double rack mold with appropriate spacing, and the center of the rack must be set at any time for the complete position of the tool.
Note: The installation dimensions of type A and type B forklifts can be set from the first. 5 Additional requirements
5.1 There must be blocks on both sides of the cargo to prevent the cargo from falling off and to guide the cargo horizontally. 5.2 If the cargo is lifted under the fork rack, the cargo must be misaligned with the top of the rack. In case of accidental falling of the cargo, the fork must be taken into account.
Design: GG/T82.1 Guiyi technical table and test stock.) 23U59: regulations, academic fork material technical requirements and inspection drawings National Technical Supervision Bureau 1996-12-23 approved 1997-07-01 field
Forklift medicine set lifting single
1009~2500
Center distance
CI/T51841996
Self-electric element
Can be four-cornered or Yin woman
Figure 1 Forks and cargo racks (single actual: 3.mm)) Our
Cargo double safety Yuan size
City version lifting station
250:-4 99
5 G00-- 2
9001-15959
Cargo and rack installation dimensions
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.