This part of GB/T 17302 specifies the message structure, segment description and segment format of export license messages. This part applies to the electronic data exchange for the management and use of export licenses in international trade. GB/T 17302.2-2008 Import and Export License Messages of the People's Republic of China Part 2: Export License Messages GB/T17302.2-2008 Standard download decompression password: www.bzxz.net
This part of GB/T 17302 specifies the message structure, segment description and segment format of export license messages. This part applies to the electronic data exchange for the management and use of export licenses in international trade.

The provisions of the following documents become the provisions of this part through reference to this part of GB/T 17302. For any dated referenced document, all subsequent amendments (excluding errata) or revisions are not applicable to this part. However, parties to an agreement based on this part are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest edition shall apply to this Part.
GB/T2659—2000 Codes for names of countries and regions of the world (ｅｑｖＩＳＯ３１６６-１：１９９７)
GB/T12406—１９９６ Codes for the representation of currencies and funds (ｉｄｔＩＳＯ４２１７：１９９０)
GB/T15421—２０08 Codes for international trade methods
GB/T15514—２０08 Codes for ports and related locations of the People's Republic of China
GB/T16833—２０02 Code tables for electronic data interchange for administration, commerce and transport
GB/T17295—２０08 Codes for international trade units
Codes for the classification of goods for import and export by customs
Preface III
Introduction…………………………………………………………IV
1 Scope…………………………………………………… １
2 Normative references…………………………………… １
3 Export license message………………………………… １
3.1 Message structure…………………………………… １
3.2 Segment description……………………………… ２
3.3 Segment format…………………………………… ３
Appendix A (Informative Appendix) Example of the Export License Message of the People’s Republic of China… ２０

ICS 35. 240. 60
National Standard of the People's Republic of China
GB/T17302.2-2008
Replaces GB/T17302,2—1998
Import and export licences messages of the People's Republic of China-Part 2: Export licence messages
Import and export licences messages of the People's Republic of China-Part 2: Export licence message2008-06-18 Issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of the People's Republic of China
Digital anti-counterfeiting
2008-11-01 Implementation
Normative references
3 Export license message
3.1 Message structure
Segment description
3.3 Segment format
Appendix A (Informative Appendix)
Example of the export license message of the People's Republic of China...........
GB/T 17302.2—2008
GB/T17302 "Import and Export License Message of the People's Republic of China" is divided into two parts: Part 1 Import license message;
Part 2: Export license message.
This part is Part 2 of GB/T17302. This part replaces GB/T 17302.2-1998. Compared with GB/T 17302.2-1998, the main changes of this part are as follows: the foreword has been updated;
--the introduction part has been added;
--the latest national standards have been cited in the chapter on normative references; GB/T 17302.2-2008
deleted the principle 1.2 in the previous version of the standard;
according to the provisions of GB/T 14805.10-2005 Application level syntax rules for electronic data interchange for administration, commerce and transport, Part 10: Syntax service catalogue" on service data segment, the segment formats of UNH, UNS and UNT have been updated; according to the provisions of GB/T 15634-2008 Segment catalogue for electronic data interchange for administration, commerce and transport, the segment format of user data segment has been updated;
--the message examples in Appendix A have been updated, and the examples of segment comments in the segment format description have also been updated accordingly. Appendix A of this part is an informative appendix.
This part was proposed by China National Institute of Standardization. This part is under the jurisdiction of the National Technical Committee for Electronic Business Standardization. This part was drafted by China National Institute of Standardization and the Ministry of Commerce. The main drafters of this part are: Hu Hanjing, Li Xiaolin, Liu Ying, Xing Liqiang, Shi Liwu, Zhang Yinfen, and Zhang Yanqi. The previous versions of the standards replaced by this part are: -GB/T17302.2—1998.
GB/T17302.2--2008
This part is formulated based on GB/T14805.1--2007 "Syntax rules for application level of electronic data interchange (EDIFACT) for administration, commerce and transport (Syntax version number: 4, syntax release number: 1) Part 1: Common syntax rules", GB/T15947-2001 "Message design rules for electronic data interchange for administration, commerce and transport" and GB/T15311.2-2008 "Format of import and export licenses of the People's Republic of China Part 2: Export license format" and actual management needs. The message type of the export license of the People's Republic of China in this part is CNEXLI. T
1 Scope
Import and Export License Messages of the People's Republic of China Part 2: Export License Messages
This part of GB/T 17302 specifies the message structure, segment description and segment format of export license messages. This part applies to the electronic data exchange for the management and use of export licenses in international trade. 2 Normative references
GB/T 17302.2-—2008
The clauses in the following documents become the clauses of this part through reference in this part of GB/T 17302. For any referenced document with an H date, all subsequent amendments (excluding errata) or revisions are not applicable to this part. However, parties to an agreement based on this part are encouraged to study whether the latest versions of these documents can be used. For any referenced document without a date, the latest version applies to this part.
Codes for the names of countries and regions around the world (eqvISO3166-1:1997)GB/T2659--2000
6Codes for currencies and funds (idtISO4217:1990)GB/T12406—1996
CB/T 15421—2008
GB/T 15514 -2008
GB/T 16833—2002
GB/T17295—2008
Code for international trade methods
Code for ports and related locations of the People's Republic of ChinaCode table for electronic data interchange for administration, commerce and transportCode for international trade units of measurement
Code for customs import and export commodity classification
Export license message
3.1 Message structure
Bits and identifiers
Header section
Detail section
Segment group 1
Message header
Message start
Date/time/deadline
Name and address
Goods clearance status
Transport Details
Place/location identifier
Document/message details
Free text
Monetary amount
Free text
Number of repetitions
:comGB/T17302.2—2008
Summary section
Section control
Control total
Segment group 2
Monetary amount
Free text
Message end
Note: In the "status" identifier, M is mandatory and C is conditional. 3.2 Segment description
Header section
Details section
UNH message header
Starts and uniquely identifies the service segment of the message. The type code of this message is "CNEXLI\. BGM message start
is used to uniquely identify the export license number and message function. DTM date/time/period
is used to identify the export license issuance period, the export license validity expiration date and the export license deletion or shipment date. The first occurrence is the export license issuance date, the second occurrence is the export license validity expiration date, and the third occurrence is the export license deletion or shipment date. RFF Reference
Used to identify the printing serial number of the export license. NAD Name and Address
Used to identify the name and code of the exporter, consignor and the name of the issuing authority. Use C082 and unstructured Cu58.
CST Goods Clearance Status
Used to identify the trade method, payment method and export commodity code specified in the contract. TDT Transport Details
Used to identify the mode of transportation used when the goods leave the country. Only one mode of transportation can be filled in. LOC Place/Location Identification
Used to identify the name of the customs declaration port where the exporter declares the goods when they are exported and the country or region where the consignor and its agent last received the goods as stipulated in the contract when the goods are shipped. . ! Allow to fill in one customs declaration area, DOC Document Message Details
Used to identify the documents attached to the export license and their document numbers. FTX Free Text
Used to identify the name of the exported goods.
Segment Group 1-LIN-MEA-MOA-FTX
Used to identify the specifications, grades, units, quantities, unit prices, total values, and total values ​​in US dollars for each exported commodity. LIN Line Item
Used to identify the sequential number of each exported commodity. :com0130
Summary Section
MEA Measurement
Used to identify the unit of measurement and its value of a commodity for which an export license is applied. MOA Monetary Amount
GB/T 17302.2-2008
Used to identify the monetary value of a commodity for which an export license is applied, including unit price, total value and total value in US dollars. The first occurrence is the unit price, the second occurrence is the total value, and the third occurrence is the total value in US dollars. FTX Free Text
Used to identify the specifications and grades of a commodity for which an export license is applied. UNS Section Control
Used to separate detail sections from summary sections.
CNT Control Total
Used to provide the total number of message sub-item control, provided by the sender for easy verification by the receiver. Segment Group 2-MEA-MOA
Used to identify the total quantity, total amount and total amount in US dollars of the exported commodity. MEA Total
Used to identify the unit of measurement and total quantity of the commodity for which an export license is applied. MOA Monetary Amount
Used to identify the total monetary value of all commodities for which an export license is applied, including the total amount and the total amount in US dollars. The first occurrence is the total amount, and the second occurrence is the total amount in US dollars. FTX Free Text
Used to identify comments made by the visa authority. UNT Message Trailer
Ends the message and gives the number of segments in the message and the control reference number of the message. 3.3 Segment Format
The export license message consists of segments, each of which lists the status, type and length of the data element in UN/EDIFACT and its correspondence with this part, and makes appropriate comments and explanations. The segments are listed in the order in which they appear in the message. The segment or segment group marker is followed by the M (mandatory)/C (conditional) indicator, the maximum number of repetitions and the segment description. From left to right, the first column is the data element tag and name, and the second column is the status (M or C), type and length of the data element in EDIFACT. The above information constitutes the original EDIFACT segment format definition. The third and fourth columns are specific to this part. The third column is the status indicator of the use of EDIFACT data, and the fourth column is the description and the code value used for the specific data element in the message. In addition to the code values ​​in GB/T16833-2002, this part also uses the national standard code and the Ministry of Commerce code. When the national standard code is used, its standard release number is listed in the segment notes; when the code in GB/T16833-2002 and the Ministry of Commerce code are used, its specific code value is listed in the fourth column. The mandatory (M) data element in the EDIFACT segment remains unchanged in this part. The conditional (C) data element in the EDIFACT segment is further agreed upon in this part according to actual business needs. Three states can be expressed by abbreviations, which are listed as follows: - Mandatory M indicates that the data element is required and must be sent; - Conditional C indicates that the data element is optional and can be sent according to user requirements; - Not used N indicates that the data element is not used and should be omitted. If a composite data element is marked as N, the status indicator column of all data elements in the composite data element is blank. The segment format description of the export license message is shown in Tables 1 to 20. 3
W.GB/T 17302.2-2008
UNH message header
Function; start, identify and describe the message.
Status: M
Number of repetitions: 1
0062 Message reference number
S009 Message identifier
0065 Message type
0052 Message version number
0054 Message release number
0051 Management agency, code type
0057 Community assigned code
0110 Code table directory version number
0113 Message type sub-function identifier
0068 Public access reference
S010 Transmission status
0070 Transmission orderbzxz.net
0073 The first and last Next transmission
S016 Message subset identification
0115 Message subset identification
0116 Message sub-version number
0118 Message sub-release number
0051 Administration, code type
S016 Message implementation guide identification
Message implementation guide identification
Message implementation guide version number
0124 Message implementation guide release number
0051 Administration, code type
So18 Script identification
Script identification
Script version number
EDIFACT
Ml an..14
CJ an..35
This part
Unique message reference of the sender. Sequence number of the message in the exchange. It has the same value as data element 0062 in UNT and is generated by the sender
CNEXLI—People's Republic of China Export License D—Draft
081—First Edition, 2008
SWB—Ministry of Commerce (Customized)
Script Release Number
Administrative Agency: Code Type
Table 1 (Continued)
GB/T 17302.2—2008
Note: Data elements 0065, 0052.0054 and 0051: Indicates that the message is the export license message format managed by the Ministry of Commerce (SWB) based on the first edition released in 2008.
Example:
UNH+MEC002+CNEXLI.D,081,SWB\The message reference of export license is ME0002, the management agency is the Ministry of Commerce, the message release number is 081, and the version number is D.
BGM message start
Function: Indicate the message type and function and transmit the identification number. Status: M
Number of repetitions: 1
EDIFACT
Document/Message Name
Document Name Code
Code Table Identification Code
Code Table Responsible Organization Code
Document Name
Document/Message Identification
Document Identifier
1056 Version Identifier
Revision Identifier
Message Function Code
Response Type Code
This Part
811--——Export License
License number is assigned by the issuing authority
Cancelled, 5-
Replaced, 9-Normal Issuance
To: Data Element 1001 Document Name Code adopts GB/T15422--1994, only the old 811 can be used in this part. Data element 1225 uses different values ​​depending on the purpose of the message. It is used to cancel the situation of deleting certificates. Generally, when the company withdraws or changes certificates, the management authority shall cancel the certificate change or make mistakes in the certificate. The letter of deleting certificates is used; it is used to indicate the situation of processing the number of shipments: the code is 9 (the initial one), indicating normal issuance of certificates. For example: BCM+811+08-AA-902504+9 The export license number is 08-AA-902504. This certificate is issued normally, and the code is 9. GB/T 17302.2—2008
New Moon/Time/Expiration
Function: Indicate date and/or time or deadline. Status;M
Repeat soft number: 3
C507 Date/time/expiration
Date/time/expiration function code
Code qualifier
2380 Date/time/expiration
Date/time/expiration format
EDIFACT
This section
· Document date indicates the export license issuance date
-Export license validity expiration date
Processing date indicates the date of deleting the license or processing the shipment
-CCYYMMDL
Note: This section is used to identify the export license issuance date, validity expiration date and the date of deleting the license or processing the shipment. Different values ​​of EE 2005 identify different dates of the export license. When the message function is 9 (initial), the export license issuance date is the same as the date of deleting the license or processing the shipment number; when the message function is cancellation or replacement, the export license issuance date is different from the date of deleting the license or processing the shipment number.
Data element 2379 uses code 102, that is, the export license date is expressed in the standard format CCYYMMDD. For example:
DTM+13720080131:102 indicates that the export license issuance date is January 31, 2008. IYIM+147-20080731:101° indicates that the export license is valid until July 31, 2008: Table 4
RFF reference
Function: Indicates a reference.
Status:C
Number of repetitions: 1
FDIFACT
C506 Reference
1153 Reference code qualifier
Reference identifier
Document bank identifier
Version identifier
Revision identifier
Note: This paragraph is used to identify the serial number of the export license document. Data element 1153 uses the code SE, which means serial number. For example:
This part
SE-Serial number
Printed serial number of document
RFFSE:7481284\ means the printed serial number of the export license is 7481284, 6
NAD Name and Address Certificate
GB/T 17302.2--2008
Function: Describes the name/address and its related functions, and can use C082 and/or unstructured C058 or structured C080 to 3207 alone. Status: M
Number of Repetitions: 3
EDIFACT
3035 Party Function Code Qualifier
C082 Party Identification Details
3039 Party Identifier
1131 Code Table Identification Code
3055 Code Table Responsible Organization Code
C058 Name and Address
3124 Name and Address Description
3124 Name and Address Description
3124 Name and Address Description
3124 Name and Address Description
3124 Name and Address Description
C080 Party Name
3036 Party Name
3036 Party Name
3036 Party Name
3036 Party Name| |tt||3036 Party Name
3036 Party Name
3045 Party Name Format Code
C059 Street
3042 Street Name and House Number/
Post Office Box Identifier
Street Name and House Number/
Post Office Box Identifier
This Part
- Exporter, CZ-
Shipper, MS-
Document/Message Issuer/Sender, indicating the issuing authority
Exporter Code and Shipper Code, using the 13-digit enterprise code in the "Import and Export Enterprise Qualification Certificate of the People's Republic of China", "Registration Form for Foreign Trade Operators", or "Foreign Investment Enterprise Approval Certificate" c
M an..35 Man..35
Party Identification
Ministry of Commerce
Name of Exporter
Name of Shipper
Name of Issuing Authority
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.