SY/T 5463-1992 Types and basic parameters of plunger pumps for oilfield fracturingSY/T5463-1992 Standard download decompression password: www.bzxz.net

Petroleum and Natural Gas Industry Standard of the People's Republic of China SY/T 5463-92
Plunger Pumps for Oilfield Fracturing
Types and Basic Parameters
Published on 1992-06-20
Ministry of Energy of the People's Republic of China
Implemented on 1992-12-01
Subject Content and Scope of Application
Industry Standard of the People's Republic of China
Plunger Pumps for Oilfield Fracturing Types and Basic ParametersSY/T 5463--92
This standard specifies the types and basic parameters of plunger pumps for fracturing and acidizing operations in oil and natural gas fields. This standard applies to fracturing and acidizing units used in production increase operations in onshore and offshore oil and gas fields. Reference standards
GB3165.1 Maximum working pressure and nominal diameter of oil wellhead equipment GB8423 Terminology of oil drilling equipment and special pipes 3 Types and basic parameters
3.1 Structural type
3.1.1 The overall structure of the plunger pump is horizontal. 3.1.2 The power end is a crank-connecting rod mechanism,
3,1.3 The hydraulic end is a three-plunger or five-plunger reciprocating single-acting type. 3.2 Basic parameters
3.2.1 Maximum discharge pressure level
35, 40, 50, 70, 105, 140MPac3.2.2 Stroke level
100,125,160,200mm.
3.2.3 The maximum stroke frequency shall not exceed 400min~1. 3.2.4 Plunger diameter series
6570,75，80,85,90,95,100,105110,115,120,125130,135,140,145,150,160，170,180，190mm.
3.2.5 Rated power level
210,265，(300),335,(380),425，530,670，(750),850，1060，1320,1700kW. Note: The values ​​in brackets are only applicable to old products. Approved by the Ministry of Energy of the People's Republic of China on June 20, 1992, and implemented on December 1, 1992
Model representation method
SY5463-92
Rated power value, unit: kW
Maximum discharge pressure value, unit: MPabzxz.net
A code number of the fracturing column cold pump represented by the Chinese pinyin
Example: The model representation method of the three-piston pump with a maximum discharge pressure of 105MPa and a rated power of 1320kW is 3YZB105-1320.
Additional instructions:
This standard was proposed by China National Petroleum Corporation. This standard is under the jurisdiction of the National Technical Committee for Standardization of Petroleum Drilling and Production Equipment and Tools. This standard was drafted by the Fourth Petroleum Machinery Plant and Lanzhou General Machinery Plant of China National Petroleum Corporation. The main drafters of this standard are Chen Yang, Hu Guiquan, Zhang Guiyuan, and Liu Sufang.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.