This standard specifies tire specifications, basic parameters, main dimensions and the corresponding relationship between air pressure and load. This standard applies to passenger car pneumatic tires. For tires designed and produced according to this standard, their requirements, test methods, inspection rules, marking and packaging shall comply with the provisions of GB 9743 product standard. GB/T 2978-1997 Passenger car tire series GB/T2978-1997 standard download decompression password: www.bzxz.net

GB/T 2978—1997
my country's radial tire production for passenger cars has developed rapidly from scratch, and its products have been sold to Europe and the United States. The previous product series standards can no longer meet the development scale of the production of passenger car tires. Therefore, the product series standards for radial tires for passenger cars are revised in accordance with international advanced standards. This standard is based on the equivalent use of the European ETRTO—1994, and the previous version of GB/T2978--8S is revised. This version has changes in the following chapters and contents: The tire specification display method is the same as the European standard. The part on bias tires for passenger cars has been deleted.
In the table of the relationship between speed level and the maximum driving speed of tires with different rim nominal sizes, the I-level speed level has been added. In the table of tire speed level-maximum driving speed, the VW and Y-level speed levels have been added. Added the \45\ series, \50\ series and \55\ series of radial tires for passenger cars. The product series are arranged from high to low according to the tire breakage rate. In the basic parameters column, only the rim models of the second-grade rims are set. The main parameters of the wheel specifications have been appropriately revised based on ETRT (1994). Added the table of corresponding pressures and loads of radial tires for passenger cars. This standard is valid for the same period as GB/T 2978-89. This is a summary of the standard. This standard was proposed by the Ministry of Chemical Industry of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee for the Standardization of Tires and Rim. Drafting units of this standard: Beijing Rubber Industry Research and Design Institute of the Ministry of Chemical Industry, Liaoning Changzheng Tire Co., Ltd., Shanghai Zhitai Rubber Factory. The main contributors of this standard: Shen Jianqi, Chen Minling, Ou Ling, Gan Kexian, Liu Shifang, Shan Jiachang, Wang Jinlan. This standard was first issued in March 1982 and revised for the first time in March 1989. This standard is entrusted to the National Technical Committee for the Standardization of Tires and Rim for interpretation. 1 Scope
National Standard of the People's Republic of China
Series of passenger car tyres
This standard specifies the tire specifications, basic parameters, main dimensions and the corresponding relationship between air pressure and load. This standard applies to pneumatic passenger car tyres.
GB/T 2978 -1997
Replacement G#/1397889
For tires designed and produced according to this standard, their requirements, test methods, inspection rules, marking and packaging shall comply with GB 9743 product standard is implemented in the court.
2 Referenced standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised. The parties using this standard shall discuss the possibility of using the latest version of the following standards. GB9743-1997 Passenger car rims
GB/T3487-89 Automobile rims Series 3 Tire specification representation method
185/60
Speed ​​level
Load index
Rim nominal diameter (in)
Radial structure (Radial) Tire nominal aspect ratio
Rim nominal section width (mm)
State Administration of Technical Supervision 1997-09-10 Approved for implementation on February 1, 1998
Speed ​​level and maximum driving speed
GB/T 2978—1997
The corresponding relationship between tire speed level and maximum driving speed is shown in the table. Table 1 Tire speed level and maximum driving speed correspondence table Speed ​​category
5 Requirements
Maximum driving speed, km/n
Speed ​​category
Maximum driving speed, km/h
5.1 Tire specifications, basic parameters, dimensions, and vehicle weight shall comply with the requirements of Tables 2, 3, 4, 5, 6, 7, 8, 9, and 10.
Table 2 "8 series passenger car radial tires
Load index
Specifications
Basic parameters
Main dimensions, mm
New tire
Maximum tire size
Load capacity
Standard tire size Reinforced tire Vehicle must use tire auxiliary wheel Size Half radius Section width Under load Standard diameter
125/90R126
135/8041268
R1370?4
R1173:
1e578106
333,3.COR
4. UOB,4. 50D
3,4 00H
3. 5013 4J
3.EOR.4.50R
335375
1387437
Inflation pressure
Tire specification
155/80R1
Load index
Main parameters
CB/T2978-1997
Table 2 (end)
Main dimensions (mm)
New stock inflatable shop
Wheel Tire maximum use gauge
Standard reinforced standard wheel flap allowable wheel section width outer diameter under load static half dynamic radius section fee period outer diameter
165/80R138387
175/80R1387
R148892
185/80R13190
355780R11195
205/8CR11
5- 0913
215/80R14
R16103107
:1-OOH.5.CnR
4/1.5.00B
42J,5.00B
4. 50B,5.50P
1New tire width deviation is 3.5,new tire outer diameter deviation is 1%224
2Static radius under load, rolling radius and maximum wheel size are reference data244
Load energy
Inflation pressure
Lubrication enhancement
487545
1875975]
Standard:
3The standard air pressure in the table is applicable to speed level Q and below, RS grade, TU line and H, V grade tire design table now increase 1 kPa, 20 kPa and 30 IrPa respectively.
4Note also applies to Table 3, Table 5, Table 6, Table 8, Table 9Load index
Basic parameters
GB/T 2978—1997
Table 3 “75” series passenger car radial tire
Main dimensions, mm
New tire after inflation
Maximum size for ship use
Wheel specification
Standard strength Standard wheel material Allowable wheel vehicle Section width Outside diameter Static radius under load Dynamic semi-significant Section width Outside diameter Load energy
Force, kg
Inflation pressure
History, k Pa
Standard Enhanced
175/75R14
185/75R14
195/75R14
205/75R14
R15i97
215/75R14
R15100
R16103107
225/75R14
R1510 2
R16104108
235/75R15
255/75R15
265/25R15
Load index
Wheel specifications
Basic punch
*70\ series passenger car radial tire
Main dimensions, mm
New tire after inflation
630690
690750
875975
850950
9001oog
Maximum wheel size
Standard enhanced standard wheel set Allowable wheel set Section width Outside diameter Static radius under load Rubber Dynamic flat diameter Section width Outside diameter 135/70R12
145/20R1063
155/70R1067
R15: 78
3.50R.4.50H
MJ,4. 50B
4.00B,5.00B
4VJ,5.00B
±.503,5J
5.00,5.50R
1451,5.00B
4. 50B,5J
Standard enhanced
Inflation pressure
Force, kP
Tire specifications
Load index
Basic reference
CB/T 2978—1997
Table 4 (Complete)
Main dimensions, nan
New tire after inflation
Maximum tire use
Load capacity
Force, kg
Standard enhanced Standard wheel auxiliary Allowable wheel auxiliary section width\\External straight load static half-section hydraulic radius section width, external diameter Standard enhanced
165/70R1G
175/70R12
R15: 86
185/701386
195/70R1:
205/70R13
215/70R14
225/7R14
235/70R16||tt| |105109
245/7(R16
355/70R15
263/70R16
275/70R16111
4.50.5.50E
SJ,E. GeB
5. 00B:5J
5.50B,5.OUB
5JF5- 503
5123,611
437487
4621515
4501--
475:530
630710
615690
63073n
690750
19251030
Tire Specifications
Load Index
Basic Parameters
GB/T 2978—1997
Table 5 “65” series passenger car radial tires
Main dimensions. mm
New tire inflation
Maximum tire use
Load capacity
Air pressure
Standard reinforcement Standard wheel lubrication Allowable wheel section width External straight load static half section width dynamic half section width Standard reinforcement
Outer diameter
[45/65R1367
155/65R12
165/65R13
175 /65R12
185/65R13
195/65R13
R150195
205/65R1491
R159499
215/65R1596100
235/65R1599
235/65R16103107
255/65115
R16109
Load index
Tire specifications
4. 0013.5.0013
4. 508,51
5J.5.5013
5. 543.6.001
,6,00B
Table 6 "60" series passenger car radial tire
Basic parameters
Main dimensions, mma
New Taekwondo Inflatable Shop
Ertaqiang
580650
615690
710800
3759c0|| tt||875975
Load energy
Maximum size of tire for age
Standard reinforced standard wheel vehicle allowed to use wheel section size Outside diameter Static radius under load Rolling radius Section width Outside diameter
Standard peak strength
155/60R12
4/J.5.00B
Tire specifications
Load index
Basic number
GB/T29781997
Table 6 (complete)
Main dimensions, mm
New and inflated
Maximum size of tire
Load energy
Inflation source
Standard strength Standard wheel output allowed to use wheel petal section distance Outside diameter Static radius under load Rolling radius Section width Outside diameter Price mark enhanced 4.50B, 5.50R
165/60R12
175/60R13
185/G0R1380
195/6R1383
205/6GR1386
215/60R1389
225/6GR13
K14 94
235/60R1394
R1598j
R10100:-
245/60R1195
255/60R15102
R16103
263/60R14103
：137
573:487
615500
6153:0
Wheel specification
Load index
Basic parameters
GB/F2978—1997
Table 7 "55* series car annual line wheel grease
Main Main dimensions, mm
New grease inflatable shop
On the maximum tire size
Load capacity
Standard sliding reinforcement standard wheel to remove the allowable wheel auxiliary section width: outer diameter of static half rolling half margin section width under load
Standard reinforcement
165/55R12
175/55R15
185/55R13
R15)883
195/55R131
205/55R1485
R168093
215/5R1589
225/5$R14
235/55R15
245/55R1699
255/55R17
275/65R15
4.50B, 5.50B
5F-5.5013
452515
580650
615690
Tire patch
175750R13
Load index
Basic parametersWww.bzxZ.net
GB/T2978—1997
50\ series passenger car radial tire
Hand should be small,
Newly inflated
Load Energy
Maximum tire size
Standard reinforcement
Standard reinforcement Standard wheel thickness Allowable rim width Outside diameter Static half-diameter Dynamic half-diameter Section width Outside diameter under load 72
185/50R14
195/50R1378
205/50R13
215/50R15
225/50R15
233/S0R16
245/50R16
255/50R16
265/50R16
285/50R15
5KJ,6. 00R: 61+71 Wheel specifications Fishing index Technical parameters GE/T2978-1997 Table 9 "45\ series passenger car radial wheels Main dimensions, num New inflated wheel Maximum use dimensions of wheel Load capacity Inflating pressure History, kPe Standard Enhanced standard wheel Vehicle allowable use Light vehicle Sectional measurement: External straight line Under load Half rolling radius Sectional width Max. strength External diameter 135/45R: 4 77
205/4R16
215/45R1584
225/74576
235725R15 88
245/-5R16
25571:R13
275/45R1391
285/45R18
#Load kg
Hot load
15：57
Standard passenger car radial tire air pressure and load correspondence table 170
487545
Load:
Air, kP
Load index
GB/1 2978
1 heart (continued)
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.