This part specifies the general and safety requirements for miscellaneous circuits used in lamps using 50Hz or 60Hz AC current below 1000V and/or DC current below 250V. This part does not apply to circuits or devices for which specific standards have been established. GB 19510.12-2005 Lamp controlgear Part 12: Particular requirements for miscellaneous electronic circuits used in conjunction with lamps GB19510.12-2005 Standard download decompression password: www.bzxz.net

ICS 29. 140. 99
National Standard of the People's Republic of China
GB19510.12—2005/1EC 61347-2-11:2001 Part 12: Lamp controlgear-Part12:
Particular requirements for miscellaneous electronic circuits used with luminaires(IEC61347-2-11:2001.1DT)
2005-01-18 Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China National Standardization Administration
2005-08-01 Implementation
Referenced documents
Conclusion
Measures for the accidental contact of the parts
Connection
Protective floor installation
European tide and connection
Heat resistance test of individual electric devices
Storage status
And electrical and electronic equipment and gas image
Burst nails, hot flow parts and rotten joints
Heat, fire and trace resistance test
CR 195:0.12--2095/IFC 61347-2-11.2001> All technical aspects of the part are controlled.
(119510 Lighting Device" is divided into 12 parts: one, ... 13510,12-2005/IF4:61347-2-11.2001 Part 2: Particular requirements for starting devices (other than glow starters); Part 3: Particular requirements for DC/AC electronic devices for lighting; Part 4: Particular requirements for AC electronic devices for fluorescent lamps; Part 5: Particular requirements for DC electronic devices for general lighting; Part 6: Particular requirements for DC electronic devices for public lighting; Part 7: Particular requirements for DC electronic devices for aircraft lighting; Part 8: Particular requirements for DC electronic devices for emergency lighting; Part 9: Particular requirements for DC electronic devices for fluorescent lamps; Part 10: Particular requirements for DC electronic devices for general lighting; Part 11: Particular requirements for DC electronic devices for aircraft lighting; Part 12: Particular requirements for DC electronic devices for emergency lighting; Part 13: Particular requirements for DC electronic devices for aircraft lighting; Part 14: Particular requirements for DC electronic devices for emergency lighting; Part 15: Particular requirements for DC electronic devices for fluorescent lamps; Part 16: Particular requirements for AC electronic devices for fluorescent lamps; Part 17: Particular requirements for AC electronic devices for fluorescent lamps; Part 18: Particular requirements for AC electronic devices for general lighting; Part 19: Particular requirements for AC electronic devices for aircraft lighting; Part 20: Particular requirements for AC electronic devices for general lighting; Part 21: Particular requirements for AC electronic devices for general lighting; Part 22: Particular requirements for AC electronic devices for general lighting; Part 23: Particular requirements for AC electronic devices for general lighting; Part 24: Particular requirements for AC electronic devices for general lighting; Part 25: Particular requirements for AC electronic devices for general lighting; Part 26: Particular requirements for AC electronic devices for general lighting; Part 27: Particular requirements for AC electronic devices for general lighting; Part 28: Particular requirements for AC electronic devices for general lighting; Part 29: Particular requirements for AC electronic devices for general lighting; Part 30: Particular requirements for AC electronic devices for general lighting; Part 31: Particular requirements for AC electronic devices for general - Special requirements for lamps (except fluorescent lamps) with power supplies: - Part 1: Special requirements for current detectors and frequency converters for high-risk tubular lamps (more expensive lamps): - Part 12: Special requirements for class I power circuits used with lamps This part is part 12 of GB 19510: Requirements for miscellaneous electronic circuits used with lamps: This part is used together with (H1931C:-, it is used in conjunction with the terms and conditions of GB19510.1 and is supplemented or reconciled after the lamp is confirmed:
This part is equivalent to [F: 637-2-112CC1 Part 2-11: Special requirements for miscellaneous electronic circuits used with lamps from the English version".
This part is equivalent to 1ECe1347211:3001. For the purpose of reuse, this part has made the following editing and interpretation modifications:)-IFr: 513-7-3-11\ is changed to \this part\, \1ECe1347211 standard number\— is changed to \(1%10.12"; except that the foreword of FC61847-2-11:2301 contains the reference to [E61847.7:3001?
The international standard is changed to \ (Note:) The brackets in the shadow format are removed: "" is used as the decimal point"; "" is used as the decimal point"; other international standards listed in the center B1=1C.1-2 can be adopted as my country's standards. The remaining international standards that have not been adopted as China's standards are replaced by these national standards or industry standards. In this part, the original part 2 is directly used as one of the national standards for the 141012 lighting system. The following can be widely used This national standard for the project design structure and its international silver clearing, as well as the national standard that will be reported: H15u1 control table IJia: Part: Safety requirements for a share (1EC61547! GB151u.7 lamp control device Part 2 bottom dynamic device (except for the flash starter 31E613472; Part 3, color silk lamp with AC: correct voltage converter special requirements (correct C (-9310. Specifications for control device || tt || 61317-2-2 | |tt||9510. Lamp control devices wwW.bzxz.Net
Part 4: Special requirements for AC electronic ballasts for fluorescent lighting &IEC1317?3, GR15143-1541:
CB105 2.5% lamp control devices Part 5 Special requirements for DC electronic ballasts for lighting in public transportation vehicles: S134724: 195\2.5% control devices Part 5, Special requirements for DC electronic ballasts for lighting in public transportation vehicles 3GK 19510,12—2005/1EC.Et347-2-11:2001(TEC e1?-2 5);
G31051374 lamp controlgear Part 7: Maintenance requirements for self-contained electronic ballasts for air conditioning lighting 3,1317-2-6), B1051 lamp controlgear Part 1: Special requirements for reduced current for virtual lighting C6134?27:119:1C.9 controlgear Part 9: Special requirements for ballasts for micro-lamps (IEC61347-2-3.2:tsss3
Part 10: Special requirements for ballasts for electromagnetic lamps: except fluorescent lamps) IE1347GB11C.1 controlgear
2J.(CB 145195)1
H1S10.11 Control devices for high-voltage self-discharging lamps Part 11: Special requirements for high-voltage self-discharging lamps for use with power converters 1EC513721):
(3153112 Control devices for lighting Part 19: Special requirements for lighting devices for use with cable terminals 8:634:313. This part was proposed by the China Light Industry Federation and was drafted by the National Standardization Technical Committee (1/221). The drafting positions of this part are: National Electric Source Quality Inspection Center (Shanghai) Beijing Self-discharging Light Source Research Center. Drafters of this part: Zhang Xin, Xue Mei, Hou Yue, Yu Anqi, Le Yingqiao, Yang Xiaoban. This part is formulated for the first time:
GU19510.12-2005/1EC:1347-2-11.2GC1 This part and the parts of G1553.2--GB1!510.12 are used for the transfer clauses of 319510.1. The attachment stipulates the applicability of this clause and the necessary supplementary requirements for the implementation of each test. H15:1C.2~GR1551.? For each sub-committee, the market will not fall. If this part of the wine is changed according to the requirements of a certain clause (33510.1) of this sub-committee, then the meaning of this clause is the full requirements of the technical test clause, but the information is not applicable to the control equipment of a specific type of lamp specified in 1151.12, except for the content. 1 Scope
FH 19510,12-2005/1EC 6134/-2-11.2001 Lamp controlgear Part 12: Particular requirements for miscellaneous electronic circuits used with lamps This part covers general requirements and safety requirements for miscellaneous electronic circuits used with AC power supplies of 50H or 6Hz 100V or less and/or 25CV or more. This part does not extend the application of special standard circuits or installations. For example, the following examples are used for circuits or installations with special standards for lamps: a circuit with a standard circuit made of a bottle and a circuit with a sensor or a station connected to the city: a circuit with a circuit that can be used with lamps: a circuit with a circuit that can be used with lamps: a circuit with a circuit that can be used with lamps: a circuit with a circuit that can be used with lamps: a circuit with a circuit that can be used with lamps: 2 Normative references The following documents The disputed clauses in this part become the clauses of this part through the reference of this part of H14510. For any dated referenced document, all subsequent amendments or revisions shall not apply to this part. However, the parties who have reached an agreement on this part may use the latest versions of these documents. For any undated referenced document, the latest version shall apply.
This part adopts GB1S513, the second year of the referenced standard: GB19516.7-2000, lighting control device part 1: general requirements and safety requirements (FC6:347-12005.113 definitions
The definitions described in G10510.1 and the following definitions 3 are adopted.1
Miscellaneous electronic circuits used in conjunction with lamps and lanterns are miscellaneous electronic circuits used in lamps and lanterns. They are not used in lamps and lanterns. They are responsible for the control of the lamps and lanterns, and only provide auxiliary kinetic energy such as switching on and off for the lamps and lanterns.
Let: This definition supports the key to the special standard of the electronic circuit. 4 General requirements
Resume the requirements of GB13510.1 Section 4:
5 Test scope
According to the requirements of GB13510.1 Section 5 and the following supplementary requirements: 5.1 Sample quantity
The following number of samples should be submitted for testing: For the requirements of Section 10.1-18 of the competition or the requirements of Section 15, one sample should be submitted: For the speed reduction state test of Section 3, one sample should be submitted (if necessary, the manufacturer can negotiate with the manufacturer to request supplementary samples or components.
CB19510.12-2005/1EC:613472-11:20015 Classification
According to the requirements of GB13510.1 Section E,
The individual components of the Class I lamps and lanterns do not need to be marked. 7.1 Patent marking
Except for the Class I circuit type ：Press the [I1SF13,1 in 1. Clear and long-term also marked with the following mandatory items:
90.1 in 1.1 and 1, and
a controllable line monitoring control terminal! For independent or class lines, the fixed mark replaces the fixed value mark, the new mark (1951017.2 change requirements, 7.2 supplementary mark
in addition to the above mandatory mark also has the following Applicable marking content is marked on the home power line, the marking is in the production and transportation of strict product categories:
safety according to the adoption of the pole inside the sign
all the markings should be GB19510.1:2 requirements 8 to prevent accidental contact with live parts
safety according to B15519.-10 requirements. 9 wire terminals
according to the requirements of 1951
10 Protective earthing equipment
According to the requirements of 63103:0.1 Section 11
11 Leakage and insulation
Requirements for connection G.33101 [[children]
12 Typical strength
According to the requirements of 210.112.
13 Preheat test of the group
No change in the period of 619510.1 Section 13, 14 Fault state
According to the requirements of (11, "Section 14 of the requirements
" 5 Cool structure
According to the requirements of B 5 [heart 1 etc. _5 Chapter
Climbing current and electrical space limitation
According to the requirements of GR195.1.1 Section 1G.
Screws, digital components and connecting parts
According to C311513. : The requirements of the 17th competition. Heat resistance, fire resistance and electric tracking resistance are in accordance with the requirements of 619515, 18th competition, 13th corrosion resistance is in accordance with GB 1951J., 19th competition, Appendix is ​​in accordance with the requirements of the applicable requirements in 1195:3,1: GB 19510.122005/1K 61347-2-11,2001
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.