JB/T 10114-1999 This standard specifies the types and basic parameters of centrifugal pumps for gathering and pipeline oil transportation. This standard is applicable to the transportation of crude oil and media with similar physical properties. The temperature of the transported medium does not exceed 80℃, and can be used for temperatures <110℃ after adding water cooling. The viscosity does not exceed the recommended range in Appendix C. This standard is published for the first time. JB/T 10114-1999 Types and basic parameters of centrifugal pumps for oil transportation JB/T10114-1999 Standard download decompression password: www.bzxz.net

ICS23.080
Machinery Industry Standard of the People's Republic of China
JB/T10114-1999
Oil-transferring centrifugal pumps
Type and basic parameters of oil-transferring centrifugal pumps1099-18-issued
National Bureau of Machinery Industry
2000-01-01implemented
Appendix A and Appendix B of this standard are both appendices of the standard. Appendix C and Appendix B of the water standard are both indicative appendices. This standard is proposed and approved by the Technical Committee for Standardization. The origin of this standard is: Beijing Water System Research Institute, Beijing Water System Research Institute. This standard is applicable to: Guo Zhongbao, Chen Lin, Machinery Industry Standard of the People's Republic of China
Oil transfer centrifugal pumps
Type and basic parameters
Typeand basicparamelersoruil-transferring centrifugal pumps Range
This standard defines the type and basic parameters of oil transfer centrifugal pumps: JH/T:10114-1999
This standard is applicable to the transportation of crude oil and similar mediums with similar properties. The temperature of the transported medium should not exceed 80℃, and the system can be used after water cooling: the viscosity should not exceed the recommended range (the attached standard is suggested). 2 Non-application standards
The provisions contained in the listed standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are not all valid. All standards are subject to revision. The parties involved in the publication of this standard should explore the possibility of using the following standards to measure the new version: B/T 13006—1991
GB/T 13007—[99]
3 Structural type
3. Type
Centrifugal pump, centrifugal pump and shaft reduction pump cavitation residual height efficiency
3.1.! Horizontal single-effect single-suction European structure, such as TY3.1.1 Horizontal multi-segment structure, such as DY (DYC) type. 3.1.3 Horizontal two-stage suction horizontal open structure, such as KY type. 3.1.4 Horizontal single-stage double suction water open structure, such as KSY type, 3.1.5 Horizontal multi-stage water lifting structure, such as KDY type, 3.2 Model representation
3.2.1 Y type
1 The capital letters and letters in the Y model represent the model characteristics, and the letter is constant. The first group of numbers after the letter indicates the suction diameter, the first group of numbers indicates the discharge diameter: the second group of numbers indicates the nominal diameter of the impeller. Example: [Y8050200
1Y80-50200
Nominal impeller diameter: 200mm
Discharge diameter: 50mm
Suction diameter: 80mm
Single-stage single-suction very weak centrifugal impeller
Approved by the State Machinery Industry Bureau on August 6, 1999 and implemented on January 1, 2000
3.1.2 Its model
.IB/T 10114—1999
The letters in a model number represent the main features of the level: the first group of numbers after the letter represents the flow rate, and the second group of numbers after the letter represents the head (the variable level multi-level model represents the single-level head), and the number after the "×" represents the multi-level model, that is, the number of impellers. Example: KDY545×14
KDY(Y) 54- 50X14
Number of stages: 14
Single-stage head: 50m
Flow plate: 54m/h
Horizontal multi-stage horizontal split centrifugal flushing system
(Horizontal multi-stage segmental centrifugal injection system)
Example 2: KY100-200
KYiKSY
4 basic dream numbers
100--200||tt ||Field diameter: 200m
Flow rate: 100m/h
Two-stage single-suction horizontal split centrifugal system
(single-stage double-water split centrifugal system) 4.1 The parameters of the gathering and transmission centrifugal pump shall comply with the provisions of Table 1-Table 5 and Figure A1 in Appendix A (Appendix of Standard Inspection) and Figure 1 in Appendix B (Standard Specification); the parameters of the pipeline oil transmission centrifugal system shall comply with the provisions of Table 4, Table 5 and Figure R1. 4.1.1 The values ​​in each table are the design point performance, and the use range specified in Figure A! and Figure D! is the recommended limit. 4.1.3 The parameters specified in each table are based on clean water at room temperature. 4.1.4 When conveying viscous media, the performance in the table shall be converted according to Appendix D (suggested appendix). 4.2 The performance of the auxiliary centrifugal oil system and the pipeline oil transmission centrifugal oil system shall comply with the provisions of GB 13007 and Table 1 and Table 5 of this standard. 4.3 The cavitation margin of the gathering and transmission centrifugal oil system and the pipeline shaft centrifugal oil system shall meet the requirements of GB 13006. 2
Hot wire
IY5U.32 160
.[Y50-32200
IY50-32250
[Y655c-166
IY6510200
51411251
:Y65 401 31 5
:YR-65-:60
:Y80-:0-200
JYB(--5(25
JYBO-50-315
1Y10080-160
IY1UU 65 2()
JY[0065250
IY:n0-65315
1Y:25-8i-400
JY12.00.350
JY12S-[00-J15
'Y139·135315
:Y15U 12 5 4U0
Y249- [50-315
JY260120400
IY 250200315
IY250-2n0-n
IY 2.5f :51.5
JY300-25(-400
JE/T10114—1999
Table IY type horizontal single-stage single-suction high-center oil pump energy parameters effective suction population good diameter
discharge outlet suitable diameter
DY1225×3
[Y122.5×]
:225x5
DY!2-23×6
DY[2-25×7
DYI2-25×S
13Y12 25-4
1Y1225×10
2Y12-0-
DY12-506
DY12-SD-7
DY125(x8
1Y12 09
Y12--5U-1O
DY25-30x4
DY2 53D-5
TY2.530x6
DY25-30.8
DY25-53x5—.
DY25-50x6
DY25-SD-7
IY25SUx8|| tt | 6
1Y46 59-7
J8r10114-1959
Table 21 Basic parameters of Y-type horizontal rate segmented centrifugal pump suction\Bridge
Maoshankou trade diameter
Elephant number
DY45-50×8
13Y46.50-10
TYS45$
765 45x5 | 5
1Y155-67×6
[Y155.57×T
DY280-43·4
DY28-43x$
DY280-43×6
DY283×T
1)Y28655|| tt||DY280-6:×6
DY280-66×7
Y280-65x8
DY150Hx
LY45060*5
DPY430-60- 6
DY4500×7
13Y45F ]×8
Market diameter
JB/T10114-1999
Table 2 (end)
Factory diameter
Yanchenxin|| tt||Deep Model
KY50-200
KY60-190
KYIG ZIO
KYI0-24/3
KY180-2RO||tt| |KSY280-42
KSYZD-63
KSY280-95
K$Y2A0-:50
KSY3SEI
KSY39080
KSY390- 130
KSYJ90190
KS$Y390-38G
KSY485-24.
KSY98539
KSY485-65
KSY4B5-140
KSYAR:-200
KSY6KILX4
KSY79U-.32
KSYT9058
KSY800- 100
K800190
KSY1260-26.-
KSY12GD-44
KSY126f-7.5
JB/T101141999
Table 3KY type horizontal Two-stage single suction horizontal split centrifugal oil system basic parameters suction diameter
non-suction diameter
table 4 KSY horizontal single-stage high-efficiency suction horizontal split High-center oil pump. H The stock ratio is stable
Batch suitable diameter
Yuan Hua card
KSY15G0100
KSY15C0210
K5Y1500280||tt| |KSY2500-35
KSY2000-5UbzxZ.net
KSY202U
X$Y28C-21
KSY2800 270
K$Y32l 32
K8Y32lF47
KSYSSn-IG
KSYSSG0-JM
K=50x10
X11Y$4 SIIx1!| |tt||KDYS1S0-12
KDY54-50×[3
KDY$4-S(×14
KDYI-TDT
X11Y H075-8||tt ||KY1 7S
KDY130L70v10
KDY1L7D-11
KDY190-79x13
KDY150-70×4
KDY1SC70>5
KDY15G-7i> 6
K11Y1G 70-7
KDY15->8
KDY154-70-9
KDY15-70-10
KDY1S-79×1
Wave Population H Table 4 (Complete) Basic data table of KDY horizontal series submersible open-type centrifugal oil pump |From the path
Paishankou Jingjing
My heart
KDY220-95×3
KDY220-95×4| |tt||K1)Y220.95-5
kT>Y220-95×
KDY22095×7
EDY220-95*B
KDY220-95×9
KLY22095-10
K12Y37t10$×3
KDY370105-4
X1Y370-105×5
X0Y370-105>6
KDY370-105×7
K11Y37I 11. >8
KDY370-105-9
KDY$00-130x3
K0Y500-130x4
DY500-130x3
K>YS 13(6
KI>Y500-1307
K650-180×4
KDY650-180:5
X13Y65U180-6
KT9U150>3||tt| |KDY950-170-4
KDY950-170×5|| tt||KDY950170x6
KDY80-284
KDYS00-59
KDYI1(00-240
KDY1100-360
KDY1250-250×2|| tt||KDY150G-400
KDY28 400
KIY557.91
KDY55.-100
Driver-passenger clearance
JB/T1D114-199
Table 5 (end)||tt ||Paishan caliber
City's most 2
ramsin
JB/T10114-1999
Xie Lu A
(Standard attachment)|| tt||Collective auxiliary business center oil ticket type
nGgE nnot
Figure 20
22ixat-owc
[B/T10114-1999
Appendix B
(Standard record)
Pipeline oil transportation business center oil pump typeH The ratio of the participating stocks is stable
Batch Yijing
Yuan Huaka
KSY15G0100
KSY15C0210
K5Y1500280
KSY2500-35
KSY2000-5U
KSY202U
X$Y28C-21
KSY2800 270
K$Y32l 32
K8Y32lF47
KSYSSn-IG
KSYSSG0-JM
K=50x10
X11Y$4 SIIx1!
KDYS1S0-12
KDY54-50×[3
KDY$4-S(×14
KDYI-TDT

KDY190-79x13
KDY150-70×4
KDY1SC70>5
KDY15G-7i>6
K11Y1G 70-7
KDY15->8
KDY154-70-9
KDY15-70-10
KDY1S-79×1
Population H stability
3B/0114-3999
Table 4 (end)
Basic data table of KDY type horizontal series underwater open centrifugal oil pump
Stock t|Self diameter
Diameter of the mountain mouth
My heart
KDY220-95×3
KDY220-95×4| |tt||K1)Y220.95-5
kT>Y220-95×
KDY22095×7
EDY220-95*B
KDY220-95×9
KLY22095-10
K12Y37t10$×3
KDY 370105-4
X1Y370-105×5
11. >8
KDY370-105-9
KDY$00-130x3
K0Y500-130x4
DY500-130x3
K>YS 13(6
KI>Y500-1307
K650-180×4
KDY650-180:5
tt | 400
KIY557.91
KDY55.-100
Driver clearance
JB/T1D114-199
Table 5 (end)
Drainage diameter
City 2
ramsin
JB/T10114-1999
Thanks A
(Standard Appendix)
Collective auxiliary business oil ticket type
nGgE nnot
Figure 20
22ixat-owc
[B/T10114-1999
Appendix B
(Standard Thank you)
Pipeline oil business oil pump typeH The ratio of the participating stocks is stable
Batch Yijing
Yuan Huaka
KSY15G0100
KSY15C0210
K5Y1500280
KSY2500-35
KSY2000-5U
KSY202U
X$Y28C-21
KSY2800 270
K$Y32l 32
K8Y32lF47
KSYSSn-IG
KSYSSG0-JM
K=50x10
X11Y$4 SIIx1!
KDYS1S0-12
KDY54-50×[3
KDY$4-S(×14
KDYI-TDT

KDY190-79x13
KDY150-70×4
KDY1SC70>5
KDY15G-7i>6
K11Y1G 70-7
KDY15->8
KDY154-70-9
KDY15-70-10
KDY1S-79×1
Population H stability
3B/0114-3999
Table 4 (end)
Basic data table of KDY type horizontal series underwater open centrifugal oil pump
Stock t|Self diameter
Diameter of the mountain mouth
My heart
KDY220-95×3
KDY220-95×4| |tt||K1)Y220.95-5
kT>Y220-95×
KDY22095×7
EDY220-95*B
KDY220-95×9
KLY22095-10
K12Y37t10$×3
KDY 370105-4
X1Y370-105×5
11. >8
KDY370-105-9
KDY$00-130x3
K0Y500-130x4
DY500-130x3
K>YS 13(6
KI>Y500-1307
K650-180×4
KDY650-180:5
tt | 400
KIY557.91
KDY55.-100
Driver clearance
JB/T1D114-199
Table 5 (end)
Drainage diameter
City 2
ramsin
JB/T10114-1999
Thanks A
(Standard Appendix)
Collective auxiliary business oil ticket type
nGgE nnot
Figure 20
22ixat-owc
[B/T10114-1999
Appendix B
(Standard Thank you)
Pipeline oil business oil pump type
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.