This part of GB/T 4857 specifies the main performance requirements, test procedures and test report contents of the equipment used in the sinusoidal fixed frequency vibration test of transport packages and single goods. This part is applicable to the assessment of the strength of transport packages and single goods under sinusoidal fixed frequency vibration and the protection of the packaging to the contents. It can be used as a single test or as part of a series of tests. GB/T 4857.7-2005 Packaging Basic tests for transport packages Part 7: Sinusoidal fixed frequency vibration test method GB/T4857.7-2005 Standard download decompression password: www.bzxz.net
This part of GB/T 4857 specifies the main performance requirements, test procedures and test report contents of the equipment used in the sinusoidal fixed frequency vibration test of transport packages and single goods. This part is applicable to the assessment of the strength of transport packages and single goods under sinusoidal fixed frequency vibration and the protection of the packaging to the contents. It can be used as a single test or as part of a series of tests.

ICs55.020
National Standard of the People's Republic of China
GB/T4857.7—2005
G3/4357.7-1492
Basic tests for transport packages-Part 7: Sinusoidal vilration tcst method at constant frequencyPackagingBasic tcsts for transport packagcs-Part 7:Sinusoidal vilration tcst method at constant frequency frequency(ISO2247+2000,MOD
2005-05-25Release
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of Standardization of the People's Republic of China
2005-11-01Implementation
C/B/4857 Packaging performance This test is divided into 27 parts:Part 1: Test method for each part during the whole test;Part 2: Temperature adjustment treatment:Part 3: Static load test method;Part 1: Pressure test method;Part 5: Drop test method;Part 3: Hydraulic force test method;Part 4: Positive load test method;Part 5: Positive load test method;Part 6: Positive load test method;Part 7: Positive load test method;Part 8: Six negative test positions:Part 9: Six negative test positions;Part 10: Six negative test positions;Part 11: Six negative test positions;Part 12: Six negative test positions;Part 13: Six negative test positions;Part 14: Six negative test positions;Part 15: Six negative test positions;Part 16: Six negative test positions;Part 17: Six negative test positions;Part 18: Six negative test positions;Part 19: Six negative test positions;Part 20: Six negative test positions;Part 21: Six negative test positions;Part 22: Part 101: Dynamic force test method for variable frequency source; Part 11: Water impact test method; Part 13: Water impact test method; Part A: Low pressure test method; Part 14: Controlled horizontal impact test method; Part 16: Strain test method for whole machine; Part 17: The maximum quality of textile parts; Part 1: The validity period of the test program for shrinkage performance; Part 19: Circulation test information record! Part 20: Collision test method; Part 21: Equipment method; Part 22: Unit cargo stability test method; Part 23: Special machine dynamic test method. GD/T 4857.7—2005
This standard is divided into 7 parts of GB/4857. The wood part adopts TS022.7:20100% packaging—a complete and fully loaded transportation and single cargo—quality determination and vibration test standard. Compared with GB/T1857.71992 packaging standard and I502247 standard, the main differences are as follows: For the sake of Chinese users’ habits, the name of the original standard is retained, which is different from many old Chinese standards. Some modifications are made: the relevant explanatory notes are reduced;
In general, the relevant terms are not defined in the international packaging standards, so please eliminate the existing technical definitions! Regarding the provisions of "temperature degradation during test", the relevant contents of the test report have been rectified compared with GB/4857.71992. The changes of this part are as follows: the original applicable to the test packaging in the life scope has been changed to applicable to the return packaging and single light goods! In the requirements for the height difference of the vibration platform, the requirements for the change of the height difference are all in the standard: the provisions for the test receiver have been added;
The Appendix A of this part is for the use of other users, GB/I4857.7-2C05
This part will replace GH/1487.7 from the date of implementation. 992
This part is issued by the National Packaging Standardization Technical Committee Hengshan and such as the mouth, this part mainly requires the establishment of units: China Machinery Productivity Promotion Center, Suzhou Testing Instrument Factory, National Packaging Product Quality Supervision and Inspection Center (Jinan)
This part mainly requires the establishment of units: China Machinery Productivity Promotion Center, Suzhou Testing Instrument Factory, National Packaging Product Quality Supervision and Inspection Center (Jinan)
This part mainly requires the establishment of units: China Machinery Productivity Promotion Center, Suzhou Testing Instrument Factory, National Packaging Product Quality Supervision and Inspection Center (Jinan)
This part mainly requires the establishment of units: China Machinery Product Productivity Promotion Center, Suzhou Testing Instrument Factory, National Packaging Product Quality Supervision and Inspection Center (Jinan)
This part mainly requires the establishment of units: China Machinery Product Product Quality Supervision and Inspection Center, Suzhou Testing Instrument Factory, National Packaging Product Quality Supervision and Inspection Center (Jinan)
This part mainly requires the establishment of units: China Machinery Product Product Quality Supervision and Inspection Center, Suzhou Testing Instrument Factory, National Packaging Product Quality Supervision and Inspection Center (Jinan)
This part mainly requires the establishment of units: China Machinery Product Product Quality Supervision and Inspection Center, Suzhou Testing Instrument Factory, National Packaging Product Quality Supervision and Inspection Center (Jinan)
This part mainly requires the establishment of units: China Machinery Product Product Quality Supervision and Inspection Center, Suzhou Testing Instrument Factory, Suzhou Testing Instrument Factory, Suzhou Testing Instrument Factory, Suzhou Testing Instrument Factory, Suzhou Testing Instrument Factory, Suzhou Testing Instrument Factory, Suzhou Testing Instrument Factory, Suzhou Testing Instrument Factory, Suzhou Testing Instrument Factory, Suzhou Testing Instrument Factory, Suzhou Testing Instrument Factory, Suzhou Testing Instrument Factory, Suzhou Testing Instrument Factory, Suzhou Testing Instrument Factory, Suzhou Testing Instrument Factory, It can be used as a single test or as a component of a series of tests. 2 Normative references
The clauses in the following documents become the remainder of this part through the reference of this part B/T 857. All subsequent amendments (not including changes or revisions) of the referenced documents with a specified date shall not apply to this part. However, the parties to the agreement reached with this part are encouraged to study the latest versions of these documents. For all referenced documents without a specified date, the latest version shall apply to this part. CB/T 8.1 Method for marking the position of packaging equipment RT48:7.2
Temperature adjustment of packaging and transportation package for whole static load test GB/T 4857.3
(5/146?.17 General principles for compiling performance test outlines for packaging products GH:T 4567. 18
Test principle
The performance test data of the packaged goods are divided into two parts, and the two test samples are used to generate low-frequency positive vibration. The total humidity is not high, and the test is continuous and the maximum speed is released. The single product is tested in a certain way to change the state of the shock. It is necessary to add a certain load upstream of the product to simulate the situation of the transported goods under the condition of the bottom of the pile.
4 Test equipment
4.1 Vibration table
The vibration table should be of sufficient size and sufficient strength, rigidity and bearing capacity. The test table should be able to ensure that the surface of the vibration table remains horizontal during the new vibration. Its maximum load should be higher than the original test value, and the vibration table should be level, with the horizontal load being c. 3\.
dynamic distribution:
) frame: used to move the test product to both sides during the test: use a mechanical change to prevent the test sample from vibrating during the test: b>
) device used for the return method of the packaging during transportation. In addition, the dynamic platform meets the requirements of 3.3.4.2. The test instrument shall include a speed meter, a position adjuster and an effective belt display or storage device to measure the speed value on the surface of the test sample. The test system shall only meet the test rate of 15% of the specified rate. ：It can also be equipped with a device that can be used to penetrate the inner contents of the device. It can be used as a device. It can be used with the inner materials related to the most sensitive part of the vehicle or the outer surface of the vehicle. The width and model of the vehicle are as follows: GB/T 4857.7-205 5 Test procedures 5.1 Preparation of test samples According to the provisions of GB/1485Y, 17, the test products are tested in detail. 5.2 Numbering of various parts of the test samples According to the provisions of GB/T7.【, the parts of the test products are numbered in reverse order. 5.3 Pretreatment of test samples According to the provisions of GB/T 4857.2, a method is selected to pre-treat the test samples with temperature and humidity. 5.4 Temperature conditions during the test
The test should be carried out under the same conditions as the treatment. If no pretreatment is achieved, the test must be started within 5m of the test sample leaving the pretreatment environment.
5.5 Selection of test strength value
According to the provisions of (48, 18) test intensity value. 5.6 Test steps
5.6.1 Record the temperature of the test environment.
56.2. The test point must be placed on the platform according to the design: the center of gravity of the test sample should be as close to the geometric center of the platform as possible. If the test sample is not fixed on the platform, use the national fence and, if necessary, on the test sample. Add the appropriateness, and the addition procedure shall conform to the provisions of GET4857.3. 5.6.3 Method A 5.6.3.1 Operate the vibration table to produce a speed between 9.3 g and 1.08 g and to keep the test specimen from separating from the table surface. 5.6.3.2 Select a certain (positive or negative) acceleration (see Figure A.1 in Appendix A) and replace the corresponding frequency range with the internal acceleration, and produce a value between 1 and 2 g, and conduct the test. 5.6.4 Method B 5.6.4.1 Operate the vibration table to produce a specified acceleration, which can cause the test specimen to separate from the partition and thus cause the test specimen to separate from the partition and ...2 Select a predetermined amplitude and start vibrating the test sample at a frequency of 2 Hz: gradually increase the frequency until the test sample is about to separate from the vibration table. During this period, the test sample is screened and the minimum displacement number is 1.5 mm. The standard measuring tool has a low area in the center of the test space and the area under test is damaged. This indicates that the test sample is about to separate from the vibration table. 5.6.5 After the test, the damage of the contents shall be inspected according to relevant standards and specifications, and the test report shall be divided into two parts. 6 Test report The test report shall include the following:
The company's statement that this part is implemented
h) The name, type, function, etc. of the contents, such as the long mold contents produced. The following shall be detailed in detail: the number of samples wwW.bzxz.Net
d) The name and content of the packaging, the specifications, structure and materials, injection pads, supports, fixing methods, fittings, holes and other information! 9) Whether the test sample has been loaded with a certain amount of material (in grams); whether the sample has been loaded with a certain amount of material (in grams); and the duration of the load on the sample; the state of the sample during the test; the temperature and time to which it is subjected; k1. The relative humidity of the test site; 1. The vibration angle, amplitude, frequency and duration of the test on the vibration table; m; CB/T4857.7—2005; tt||Test results: any observed phenomena that may help to correctly interpret the test results should be recorded in detail. A or better method, test results analysis, n
explain the differences between the test method used and this part; p
test registration and period, test personnel location, test unit, CB/T4857.7-2005
Appendix A
"Test strength value determination"
During the test, the relationship between the vibration, low speed environment and vibration rate can be determined as shown in Figure A.1. A.1
a25aim
is the value of the force produced by the vertical force such as the transmission surface and the teacher's description: YiRi
This is between the peak value, the Huimi
rate, and the small effect. A, T resistance amplitude. Value such as speed, bottle related again
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.