GB/T 3753.2-1983 Compression-type combined tee fitting
Basic Information
Standard ID:
GB/T 3753.2-1983
Standard Name: Compression-type combined tee fitting
Chinese Name:
卡套式组合三通接头体
Standard category:National Standard (GB)
state:Abolished
Date of Release1983-06-17
Date of Implementation:1984-04-01
Date of Expiration:2008-11-01
standard classification number
Standard ICS number:21.060.60;
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:China Standards Press
Publication date:1984-04-01
other information
Release date:1983-06-17
Review date:2004-10-14
Drafting unit:Standardization Institute of the Ministry of Machinery Industry
Focal point unit:National Technical Committee for Standardization of Pipe Accessories
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 3753.2-1983 Compression-type tee joint body GB/T3753.2-1983 standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Compression-type combination tee body
Adjustable T-unlons-Body
Marking example:
Nominal pressure J grade, tube outer diameter D, compression-type combination tee body of 14mm: Joint body J14GB3753.2-83
National Bureau of Standards 1983-06-17 Issued
UDC621.643.4
GB3753.2—83
1984-0401 Implementation
Nominal pressure
(bar)
Tube outer diameter
M10×1
M12×1.25
M30× 2
M33×2
M36×2
M42×2
M45×2
M48×2
M52×2
M 14×1.5
M 2U×1.5
M24×1.5
M30×2www.bzxz.net
M33×2
M36×2
M39×2
Note: The weight is calculated value, and the specific gravity is 7.85kg/dm. The technical conditions shall be in accordance with GB3765-83. GB 3753.2—88
GB $753.283
（kg/100 pieces
Additional explanation
GB3758.2-8
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and drafted by the Standardization Research Institute of the Ministry of Machinery Industry. Shenyang Heavy Machinery Plant, Chongqing Heavy Automobile Research Institute, Dalian He Machine Tool Research Institute, Zhejiang Haichuo County Pipe Fittings Factory, Shanghai Electric Power First Bureau Technology Information Institute, and the 70th Institute of the Ministry of Aerospace participated in the drafting of this standard. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Banshi, and Wang Musu. From the date of implementation of this standard, the original ministry standard B1980-7 "Compression Fitting Combination Tee Body" shall be invalid.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.