HG/T 2394-1992 Radial Tire Building Machine Series HG/T2394-1992 Standard Download Decompression Password: www.bzxz.net

Chemical Industry Standard of the People's Republic of China
HG/T239492
Radial tire building machine series
Published on September 15, 1992
Ministry of Chemical Industry of the People's Republic of China
Standard heat loss is implemented in accordance with b8os.c1993-07-01
Chemical Industry Standard of the People's Republic of China
Radial tire building machine series
Subject content and scope of application
HG/T2394-92
This standard specifies the radial tire Series and basic parameters of radial tire first-stage forming machines, radial tire second-stage forming machines, and radial tire one-step forming machines.
This standard applies to radial tire forming machines for passenger cars, light trucks and trucks. 2 Series
2.1 Specification code of radial tire first-stage forming machine: 0; 1; 2, 2.2 Specification code of radial tire second-stage forming machine: 1; 2.2.3 Specification code of radial tire one-step forming machine: 1; 2.3 Basic parameters
3.1 The basic parameters of radial tire first-stage forming machines shall comply with the requirements of Table 1. Table 1
Specification code
Basic parameters
Applicable rim nominal diameter mark
Forming head diameter
Forming head width
Forming head speed T/min
Maximum cord width
Maximum width of cord shoulder
335~400
255~400
125~250
The basic parameters of the second stage forming machine of radial tires shall comply with the requirements of Table 2. 3.2
1992-09-15 approved by the Ministry of Chemical Industry of the People's Republic of China Standard control exchange network mm.bzsoeo.ccn Various standards industry information free download 1
360~460
280~460
125~200
600~700
450~740
100~150
1993-07-01 implementation
Basic parameters
Applicable wheel nominal diameter mark
Belt Layer bonding drum diameter
Maximum belt width
Maximum tread width
Belt bonding drum speed
Transfer ring clamping diameter mm
Tire window spacing of shaping machine head
Shaping machine head speed
Specification code
HG/T2394—92www.bzxz.net
475~720
500~780
200~500
80~150
The basic parameters of the radial tire one-step building machine shall comply with the requirements of Table 3. 3.3
Specification code
Basic parameters
Applicable wheel auxiliary nominal diameter mark
Belt layer bonding drum diameter
Belt layer maximum width
Tread maximum width
Belt layer bonding maximum speed
Transfer ring clamping diameter
Setting machine head bead spacing
Setting machine head maximum speed
Cord maximum width
(Note): Basic parameters can be selected within the given parameters, 1
450~720
475~780
200~500
Standard replacement network.bssore.com2
8 50~1050
900~1150
260~850
60~120
2(sexual)
17.5~24.5
6501050
270~300
680~1150
225870
1000~1100
Additional notes:
This standard was proposed by China National Chemical Equipment Corporation, HG/T2394—92
This standard is under the jurisdiction of the Rubber Machinery Subcommittee of the National Technical Committee for Standardization of Rubber and Plastic Machinery, and was drafted by the Beijing Rubber Industry Research and Design Institute of the Ministry of Chemical Industry. The main drafters of this standard are He Wanqing, Zhang Jianyuan and Lin Yongmo. Standard network mm.bzaoao.ecm Various standard liquid industry data are free to download. People's Republic of China Chemical Industry Standards Radial tire building machine series HG/T2394-92 Chemical Industry Standards Editorial Department (Standardization Research Institute of the Ministry of Chemical Industry) Postal Code: 100013 Printing Chemical Industry Standardization Research Institute Copyright reserved No reproduction allowed Format 880×12301/16 Word count 5000 First printing in July 1993 First edition in July 1993 Printing number—500 Standard fee network: ww.kg808o.cm.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.