JB/T 6385-1992 Cone seal welded pressure gauge pipe joint
Basic Information
Standard ID:
JB/T 6385-1992
Standard Name: Cone seal welded pressure gauge pipe joint
Chinese Name:
锥密封焊接式压力表管接头
Standard category:Machinery Industry Standard (JB)
state:Abolished
Date of Release1992-07-14
Date of Implementation:1993-07-01
Date of Expiration:2007-09-01
standard classification number
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:Mechanical Industry Press
other information
Focal point unit:Xi'an Heavy Machinery Research Institute
Introduction to standards:
This standard specifies the classification of cone seal welded pressure gauge pipe joints. JB/T 6385-1992 Cone seal welded pressure gauge pipe joints JB/T6385-1992 Standard download decompression password: www.bzxz.net
Some standard content:
Mechanical Industry Standard of the People's Republic of China
JB/T 6385-1992
Cone Seal Welded Pressure Gauge Pipe Fittings
Published on 1992-07-14
Implementation by the Ministry of Machinery and Electronics Industry of the People's Republic of China on 1993-07-01
Mechanical Industry Standard of the People's Republic of China
Cone Seal Welded Pressure Gauge Pipe Fittings
1 Subject Content and Scope of Application
This standard specifies the classification of cone seal welded pressure gauge pipe fittings JB/T 63851992
This standard applies to cone seal welded pressure gauge pipe fittings in pipeline systems with oil and gas as the medium. Nominal pressure PN≤31.5MPa, working temperature -25~+80℃.
Cited standards
GB1414
GB2346
GB2878
GB5865
JB/T6386
3Product categories
Ordinary thread size series for pipe screw-in ends Hydraulic and pneumatic systems and components Nominal pressure series Hydraulic and pneumatic systems and components Oil (gas) port connection thread size Lubrication system and components Basic parameters
Technical conditions for cone seal welded pipe joints
The types and dimensions of cone seal welded pressure gauge pipe joints shall be as specified in the drawings and tables. 3.1
Pipe outer diameter
Approved by the Ministry of Machinery and Electronics Industry on July 14, 199212
O-ring
11.2×1.8
Implementation on July 1, 1993
Marking method
Pipe joint
3.3 Marking example:
JB/T6385
JB/T6385-1992
Standard number
Pressure gauge threadwwW.bzxz.Net
Pipe outer diameter, mm
Product name
Pipe outer diameter D. The cone seal welded pressure gauge pipe joint with a thread of 20 mm and a pressure gauge thread of M20×1.5: Pipe joint
20M20×1.5
Technical conditions
JB/T6385
Technical conditions of cone seal welded pressure gauge pipe joints shall comply with the provisions of JB/T6386. Additional remarks:
This standard was proposed and managed by the Xi'an Heavy Machinery Research Institute of the Ministry of Machinery and Electronics Industry. This standard was drafted by the Xi'an Heavy Machinery Research Institute of the Ministry of Machinery and Electronics Industry. The main drafter of this standard was Zhao Hongzhang.
People's Republic of China
Mechanical Industry Standard
Cone Seal Welded Pressure Gauge Pipe Fitting
JB/T 63851992
Published and issued by the China Academy of Mechanical Science
Printed by the China Academy of Mechanical Science
(No. 2 Shouti South Road, Beijing
Postal Code 100044)
Format 880×1230
Sheet 1/4
Word Count 4,000
First Edition in September 1992
First Printing in September 1992
Print Quantity 1-500
Price 0.80 Yuan
Mechanical Industry Standard Service Network: http://www.JB.ac.cn61_859 /
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.