This standard specifies the plane dimension series of square and round bulk bag transport packaging. This standard applies to road, rail and water transport. GB/T 17448-1998 Bulk bag transport packaging dimension series GB/T17448-1998 Standard download decompression password: www.bzxz.net
This standard specifies the plane dimension series of square and round bulk bag transport packaging. This standard applies to road, rail and water transport.

GB/T17448-1998
A bulk bag is a transport packaging container that can usually hold more than 1t of bulk solid particles or powdered objects. It has sufficient strength and is suitable for lifting and transportation. Studying the series of standards for bulk bag transport packaging dimensions and mastering the full size of bulk bag transport packaging can make more reasonable use of the effective space of transportation tools.
This standard is based on road, rail and water transportation, and is based on the minimum internal dimensions of 6m (20°) and 12m (40°) international standard general containers and the dimensions of typical road and rail truck compartments. This standard can be used in conjunction with GB/T10454 "Flexible Bulk Bags". Appendix A of this standard is a prompt appendix.
This standard was proposed by China Packaging Corporation. This standard is under the jurisdiction of the National Packaging Standardization Technical Committee. The drafting units of this standard are: Standard Metrology Institute of the Ministry of Transport, Standard Metrology Institute of the Ministry of Railways, and National Building Materials Bureau. The main drafters of this standard are: Wang Wei, Xiong Caiqi, Zhang Jin, and Xing Haitao. 50
1 Scope
National Standard of the People's Republic of China
Dimensions of flexible freight containertransport packages
Packaging--Dimensions of flexible freight containertransport packages
This standard specifies the full plane dimension series of square and round container transport packages. This standard applies to road, rail and water transport. 2 Referenced standards
GB/T174481998
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised. All parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T1413-1998 Series 1 Classification, dimensions and rated mass of containers GB/T10454—1989 Flexible bulk bags
GB/T16471-1996 Dimension limits of transport packages 3 Principles
Based on the minimum internal dimensions of 6m (20) and 12m (40) international standard general containers specified in GB/T1413 and the dimensions of typical road and railway truck compartments specified in GB/T16471, the full plane dimensions of bulk bag transport packages are calculated and specified by the arrangement method. Square and round bulk bags can be regarded as circles when fully filled, and are represented by diameter D. 4 Bulk bag transport package size series
4.1 Bulk bag transport package empty bags
Bulk bag transport package empty bags should comply with the requirements of GB/T10454. 4.2 Dimensions of the flat surface of a fully loaded container transport package See Table 1 for the dimensions of the flat surface of a fully loaded container transport package, and see Appendix A (suggestive appendix) for its typical stacking diagram. 4.3 Limit deviation of the flat surface of a fully loaded container transport package The limit deviation of the flat surface of a fully loaded container transport package is -4%. 4.4 Height dimensions of a container transport package
The height dimensions of a container transport package can be selected according to the characteristics of the contents and the specific conditions of the vehicle. Approved by the State Administration of Quality and Technical Supervision on August 10, 1998 and implemented on October 1, 1999
Diameter D
1) is the preferred size.
GB/T17448-—1998
Table 1 Full plane dimensions of bulk bag transport packaging Number of pieces in single layer stacking
6m (20) container
12m (40°) container
Medium-duty highway truck
CA1091
Railway vehicle
GB/T 17448 --1998
Appendix A
(Suggestive appendix)
Typical stacking diagram of full bulk bags
A1 Stacking diagram of full bulk bags in 6m (20°) general purpose container The internal dimensions of a 6m (20) general purpose container are 5867mm×2330mm. D=1250mm
D=1000 mm
Stacking diagram of A2 full bulk bags in 12m (40°) general container The internal dimensions of 12m (40) general container are 11998mm×2330mm. D-1300mm
D=1 250 mm
D=1 200 mm
D=1 150 mm
D=800 mm
GB/T 17448 -1998
D=1 100 mm
D=1000 mm
D=950 mm
D=850 mm
D=800 mm
GB/T 17448—1998
D=750 mm
Stacking diagram of A3 full container bags on highway medium truck CA1091The compartment size of medium truck CA1091 is 4200mm×2300mm. 200mmbZxz.net
D=800 mm
Stacking diagram of A4 full container bags on railway bulk car C60. The carriage size of railway car C60 is 12930mm×2820.mm. D = 1300 mm | | tt | ||D=950 mn
D=900 mm
GB/T 17448—1998
D=850 mm
D=800m
D=750mm
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.