This standard specifies the classification and naming, requirements, test methods, inspection rules and marking, packaging, transportation and storage of oil pastels. This standard applies to oil pastels used by children, students and painting enthusiasts, and also applies to corresponding oil pastels, oil chalks and pastel crayons. QB 2586-2003 Oil Pastels QB2586-2003 standard download decompression password: www.bzxz.net

ICS 87.080
Classification number: Y50
Registration number: 12500-2503
Light Industry Industry Standard of the People's Republic of China
QB2586-2003
Oil pastel
Issued on September 13, 2003
Implementation by National Development and Reform Commission of the People's Republic of China on October 1, 2003
Article 4.2 of this standard is mandatory: the rest are recommended. This standard is proposed by China Light Industry Federation. 4 Standard Safety National Sports Products Standardization Center, iKAoNhiKAca
QB2586--2003
This standard was drafted by Shanghai Industrial Sanitary Materials Co., Ltd., Sanhai Huazhi Chemical Products Co., Ltd., Guangzhou Lemei Stationery Co., Ltd., 1zhou East Asia Stationery Co., Ltd., Zhou Huawen Hren Co., Ltd., Suzhou Yefeng Cultural Products Co., Ltd., and Xiong Stationery Products (Shanxi) Co., Ltd. participated in the drafting:
The main group of the standard is: Ji Si, spare time work, no note, first issued in May 2003
QB2686-2003
F Scope
Oil painting sticks
This standard completes the classification and naming, requirements, test methods, inspection rules and markings, packaging, delivery, comparison of oil pastels. This standard is suitable for children, schoolchildren and painting enthusiasts, and is also suitable for the corresponding color pens, oil chalks, and makeup pens. 2 Normative references
The clauses in the following documents become the clauses of this standard through the application of this standard. For any undated referenced document, the latest version applies to this standard. (i0191-2000 Packaging and transportation of black leather || tt || GB2828-198 Title Batch by set counting sample throwing procedure and sampling table (through labor control drawing for batch control) GB/T2829-2002 Period inspection Check the count and scan sequence and table (for the inspection of the process) G3/T6.543-1986 71-3:1+A1:2000E Safety Standard Part 3: 3 Classification and naming of oil-based materials Note: The oil-based materials are divided into several types. The oil-based materials should have a color name similar to its color. 4.1 Color translation can be similar to the standard sample of the production support. 4.2 Harmful elements Oil-based materials The content of soluble elements such as iodine, chromium, lead, mercury, chlorine or any soluble compound of these elements in oil pastels and their curling paper shall not exceed the limit values ​​in Table 1. The limit values ​​of transfer elements in Table 1 are as follows: 4.3 Drawing performance: 1. The coating is evenly spread, easy to stick to the old paper surface, can be coated vertically, and can produce the effect of finger and cloth support test, which has a powdery feel: 4.4 Flexural strength: |tt||Not less than 4N (double set of oil stick K: 45mm and point diameter above 12mm can be tested
4.5 Softening point
Not less than 50.
4.6 Appearance
The body (including paper and roll) is clean and bright, and the color selection is close to the road sample cabinet. 5 Test method
5.1 Color translation
Use the sample to paint on the 200mz2250m* surface according to the above method: small actual, and compare with the standard sample. 5. 2. End of the test
-riKAoNiKAca-
QB2566--2003
According to the provisions of EN71-3:1994-AI:2000E, the sample is pre-treated, and the measurement and evaluation of the early separation of the sample are carried out: 5.3 Drawing performance
The sample is painted on the 200g/m--250g/m period line, which should meet the requirements of 4.3. 5.4 Bending strength
Put the test paper such as the unpacked coupon in (3 ± 2) and then take it out, Figure 1 The span is immediately filled with a fulcrum, and then the force is measured at the force-bearing part. The load is added in the middle of the span until it gradually breaks. The value shown in the load dynamometer is shown in Figure 1. Example of flexural strength of the test
5.5 Softening point
The softening point is measured by the same test instrument. The test column is soluble in water, and the two are attached to the filter. After cutting, they are flattened and added to the sample. The sample is placed in the broken ink. Water is added and the temperature is measured with a thermometer. The small temperature of the thermometer when the material is soluble in water is the softening point of the stick. 5.6 Appearance of the pen
e Inspection rules
.1 The product must be inspected and qualified before it can be shipped. 6.2 The product inspection is divided into factory inspection and test. 6.1 This product is piece-rate method, and the sample unit is box. 4 Factory inspection
6.41 Factory inspection is carried out in accordance with the provisions of GB 28281997. ※ Use -- correction tape to prepare a detailed plan. The inspection level is 5-2, the inspection risk items are 4.6, and the quality level is 6.5. The results of the factory inspection are judged in two steps. First, the number of pieces in the sample basin is judged for the sample (box) to be inspected: then the qualified products (boxes) to be inspected are judged. QB25852003
Judgment of sample boxes for random inspection
6. 4. 3. 1
6. 4. 3. 2
The number of pieces in the sample box for random inspection is 5.6, and the full inspection is carried out. 2
decay 2 oil painting falls each need to determine the array
the number of other light
" in the plate?www.bzxz.net
Type inspection
14 ~17
6.5.1 In the following cases, a type inspection should be carried out. When the new product is suitable for identification or the old product is transferred to the factory for production, the materials and processes in the production are greatly changed. b
22--25
When the normal production is stopped, it is carried out once a year, and the other customers are carried out once every two years: when the national quality alliance formulates the type inspection requirements. 2636
37~-50
Type or inspection is carried out in accordance with GB2829-2002, and the monthly inspection is adopted The first push group plan, the identification level: T, is II, which does not meet 6.5.2
Xi classification, sample classification, inspection items H, test methods, unqualified quality water! RQ, see Table 3 Table 3 Oil pastel type inspection and RQL regulations Lu Gong
Unqualified will secrete
consumables classification
inspection frequency
drawing performance 4.3
rubbish folding force
6.5.3 Harmful elements need to be tested for the first time: the gold part must be qualified 4. 4
Test method
6.5.4 The result of type inspection is divided into two parts: first, the number of samples (trays) in each box of group inspection is determined, and then the number of samples (boxes) in random inspection is determined. 65.5. The number of incorrect products in random inspection is determined. 6.5.1. The number of incorrect products in random inspection is determined. 6.5.5. .2
The judgment group of each box is shown in Table 4:
The judgment group of each box of oil pastel inspection items is shown in Table 4:
The judgment group of each box of oil pastel inspection items
Description
Peppermint point
10--13 grams
14--17 sticks
18--2]
The oil samples of different colors are grouped into a group with 1 each color, and then the inspection is carried out according to the type inspection. 22~-25 2G or above
Marking, packaging, transportation, storage
1.1 Marking
-iKAoNiiKAca=
QB 2582003
The Chinese product name, enterprise name, business address, trademark, user identification number, production or batch number and "CE" mark should be printed on the product or packaging. The packaging mark should comply with the provisions of GR191-2010: 7.2 Packaging
The packaging structure should be reasonable and solid, with a narrow pattern and a narrow chain. The packaging should be in accordance with the provisions of GB/T6543-1986. The packaging should have a suitable distance
7.3 Transportation
During transportation, the packaging should be placed carefully and not sideways to avoid damage to the packaging and prevent it from being bumped and broken. Avoid contact, moisture and change.
7. 4. Dangerous storage: Do not stack too high, prevent children from cutting, and make sure to keep the feet on the ground to avoid moisture. Do not place things in a place that is exposed to direct sunlight and high temperature. The warehouse should maintain air circulation. The operating temperature should not exceed 38.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.