other information
Release date:1999-05-28
drafter:Song Wuyuan, Chen Qiang, Yuan Chunmei, Xiao Dahui, Li Zhengjun, Zhou Minghui, Liu Jianbin, Liang Ye, Liang Meiqiong, Yue Dalei, Liu Yingfeng
Drafting unit:Guangdong Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, National Light Industry Glass Product Quality Supervision and Inspection Center
Focal point unit:National Technical Committee for Standardization of Glass Instruments (SAC/TC 178)
Publishing department:General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Standardization Administration of China
competent authority:National Standardization Administration
Introduction to standards:
This standard corresponds to ISO 387:1977 "Densitometers - Construction and calibration principles", and is equivalent to ISO 387. This standard replaces GB/T 17764-1999 "Structure and calibration principles of glass float type densitometers". This standard specifies the structure and calibration principles of various glass densitometers used to measure liquid density. The densitometer used in this standard is a glass densitometer without a thermometer. This standard is applicable to various glass densitometers used to measure liquid density. The main changes of this standard compared with GB/T 17764-1999 are as follows: --- This standard adds the explanation of "relative density"; --- This standard adds the technical content of the influence of surface tension on the use of densitometers; --- This standard adds the description of the basic scale of densitometers. GB/T 17764-2008 Structure and calibration principles of density meters GB/T17764-2008 standard download decompression password: www.bzxz.net
This standard corresponds to ISO 387:1977 "Densitometers - Structure and calibration principles", and the degree of consistency with ISO 387 is equivalent.
This standard replaces GB/T 17764-1999 "Structure and calibration principles of glass float type density meters".
This standard specifies the structure and calibration principles of various glass density meters used to measure liquid density. The density meter used in this standard is a glass density meter without a thermometer.
This standard is applicable to various glass density meters used to measure liquid density.
Compared with GB/T 17764-1999, the main changes of this standard are as follows:
———This standard adds the explanation of "relative density";
———This standard adds the technical content of the influence of surface tension on the use of densitometer;
———This standard adds the description of the basic scale of densitometer.
This standard corresponds to ISO387:1977 "Densitometer---Structure and calibration principles", and the degree of consistency with ISO387 is equivalent.
This standard replaces GB/T17764-1999 "Structure and calibration principles of glass float type densitometer".
Compared with GB/T17764-1999, the main changes of this standard are as follows:
--- This standard adds the explanation of relative density (see 3.2);
--- This standard adds the technical content of the influence of surface tension on the use of density meter (see Chapter 5 and Appendix A);
--- This standard adds the description of the basic scale of density meter (see Appendix B).
Appendix A of this standard is a normative appendix, and Appendix B is an informative appendix.
This standard is under the jurisdiction of the National Technical Committee for Standardization of Glass Instruments (SAC/TC178).
The
drafting units of this standard are: Guangdong Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, National Light Industry Glass Product Quality Supervision and Inspection Center.
The main drafters of this standard are: Song Wuyuan, Chen Qiang, Yuan Chunmei, Xiao Dahui, Li Zhengjun, Zhou Minghui, Liu Jianbin, Liang Ye, Liang Meiqiong, Yue Dalei, and Liu Yingfeng.
The previous versions of the standards replaced by this standard are:
---GB/T17764-1999.
The clauses in the following documents become the clauses of this standard through reference in this standard. For any dated referenced document, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, parties to an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For any undated referenced document, its latest version applies to this standard.
ISO1768 Glass densitometer---Conventional values of volume expansion coefficient (used to develop liquid measurement tables)
Some standard content:
IS 13.S00
National Standard of the People's Republic of China
GB/T 17764--2008/1SO 387:1977 Replaced by G/T 1376--195
Construction and calibration principles of density meters
Hvdrometers--Irinciples of construction nnd adimstmntnt(130 387:1977,1DT)
Issued on September 18, 2008
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Administration of Standardization of the People's Republic of China
Implemented on September 1, 2009
G8/1 17784--2008/150 387:1977 full-scale density meter with 9 degrees Celsius
This standard will replace B7T84139 glass fiber density meter design structure and calibration characteristics. The following points are compared with GB/T1775419: This standard has increased the relative density, the technical content of the standard has been increased, and the first appendix is the normative appendix, and 3 is the information appendix. This standard was drafted by the National Glass Instrument Standardization Technical Committee (SAC/TC178), and the Guangdong Provincial Inspection and Quarantine Bureau of the People's Republic of China, and the main contributors are: Yuan Chenban, Xi Ruilou, Kai Daze, Li Shouzeming, Liu Bin, Liang, Cui Meiyuan, Kang Daxiang and Liu Mangfeng. This standard represents the quality of the products sold and is deemed to be of poor quality. GH/T 17764189
\.\.\.\.\.\AY\W..w.AYAYAY花
88/717764---20087180 387: 1977 Densitometer Calibration Procedure
This standard specifies the calibration procedure for various glass densitometers used for making glass densitometers. This standard is for glass densitometers that are not intended for use. This standard is suitable for various glass densitometers. The terms and conditions in this standard are the most important. The standard is the latest version of the standard. Any illegal date of the plan is used together with the document. The most popular version is used for this ball with 11 glass numbers. The conventional number of the whole year version is the number of the more moist liquid. The definition of the term
scale is the basis of the full teaching ss n sxale
3.11 scale can be recognized in grams. Note that the name of the makeup is / for the unit volume of the material): grams. The internationally accepted system (S) of units: Press: The most acceptable international system (S unit: Press: The most acceptable international system (S unit: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: The most acceptable international system: Press: -tip?
's "under the conditions of the density explosion, the fluid density range under the conditions of the pet copy is reduced to
reference density
3.3. The density meter's climbing service is 20 wins in the most comfortable environment, and the density meter can be said to be pushed to 15". "If you are from the same environment as the chart, the density meter is 2. The standard humidity equipment is selected for the density meter 2? Heart
3.3.2 Summer sampling relative density scale, according to the meaning of 3.2, the relative density reference of this standard is 15.$6 450 \F)
love face Zhang e
3 use, process equipment Zhang to calibrate the density meter, unless the baby requires high precision login period thin attached most A give period equipment eye as standard male classification to use the meter
15/T17764---2008/10 337: 197:3.42 for + accurate meal with a certain liquid (such as solution of American liquid) in the use of high precision density please, point to the appropriate quick reading test liquid table south and medical world density meter practical medical indication for comfortable equipment (English first capital) calibration and reading development maintenance
in the use of complex meter attention to the most dense, reading you connected to the level of the circle on the carved love number, add a topic in the body use density meter rely on density, reading treasure recommended reading medical equipment and weighing the long special bay service Work like, the value of the teaching step to adopt the new version of the revised water year depends on the location. For the carving of this machine group, the auxiliary unexpected crossing body steel magic meter coffee electric close to the month # edge number of the calibration Bo, if the meter is based on this calibration addiction, on the scale of the pain meter you clearly marked the calibration push square double (death source 4.2 reading reference
reading with tide my thickness as the scale positioning said data push 5 calibration piece
meter should be in the teaching class health
) except in the non-equal month south || tt||Earth force this infant education is calculated:
) When you develop a secret plan to move in the liquid
According to the medical requirements
61 materials and work
penetrating meter medical gas under the equipment class
(25=2)×10
Property: There are capable quantity installation #Mo regular installation batch limited time batch
operation, Bo
outside the installation I want to recognize the bacteria shadow shape
The glass drama creates a body shadow The tension coefficient is the midpoint of the Australian scale temperature love can be positive
6.1.2 The pressure is difficult to be irradiated under the poor quality
conditions. The temperature training heat
1. The temperature meter must be maintained at the same position as the temperature. 62.1 requirements, 6.1.3 If the density is controlled by me under 70℃, then the material will not deteriorate during the optimization process. The flow ten dragon piece you take the narrow side material, stone .1.4 The density meter ballast cannot be accurately stabilized in the acid 6. The tide love line and the note word are preferably black at the front end. 6.. The mark should be smooth, the mark should not have polarization phenomenon, the color of the mark should not change, and the mark should not be too bright or too dark. 6.2 Shape and structure requirements 6.2.1 The outer surface should be relatively smooth, the mark should not have polarization phenomenon, the mark should not have too much temperature change, and the mark should not have color change. 6.2.3 The best instrument for measuring liquid density with T: The structure is shown in Figure 1, the report is flat, the diameter is uniform, the inner signature is based on the density, and the relative density is the standard? : Drive you 3 super bottom help invite sales to form a spherical shape! The hollow body with air pool is effectively avoided, and the chamber is made of glass insulation. 4, the inner city is full of small sales girl's sense of storage
guide my density
table. 2.4 density meter Xin floating on the ground
total. 2.1.6.3.1. The scale and the measured value shall not be affected by the source of use and the environment change, and the direct teaching group shall be fully equipped (6.1.6). 3.2. If the magic happens, you can't do it. 6.3.3 The precision scale of the meter is used as the first step. If the meter has a blue complex scale, the value displayed on the full scale cannot be clearly seen. 6. The scale line is not clear, and the width does not exceed the center of the main scale. There is no obvious irregularity between the scale lines: the
scale line has a line below the scale. For the software of the density meter, the light quotient of the indicating scale, 6.4.6 The long scale line of the marking energy limit should be 6.6.1a), 6.5.2) and 6.5.30), 6.4.7
The short scale line should be at least ten points of the length of the instrument, and the long scale line should be at least half of the circumference of the instrument. 6.4. The distance between the center of the adjacent scale line should not exceed 3,8, or 30m, and H should not exceed 1.2 or more mr.
6,4. The product density line should be extended to at least two points. (H/7 33764--2008/150 387: 19776,5 scale line question
651 scale most individual points I! Please new degree) Oh clustering quantity avoidance service number of the whole calculation) dance first 10 small division length line:
even network length line density cable fixed state · middle engraved love dimension! Send the middle engraved line and the length I still have short scale money in the engraved magic to small joy for change 2 relative broadcast or with the type of external number of dense calculation: 6.5.2
The 5th scale contains the scale line:
Avoid the effective trade between the two medical lines.
The small scale is used as the density of the glass band. 6.5. 31
The 10 scales are long scale lines:
Avoid the long-term long line with a middle scale line
The continuous long-term line has a short scale line between the two continuous long-term lines. 6.6 Scale line marking requirements
6.6.1 The scale should only have a group number, and the maximum number of each number should be set on the economy. 6.2 The scale number system allows you to easily identify the corresponding value of any scale line. 6.6.3 The scale limit sensitivity scale line and the minimum scale line are studied and adjusted. 6.6.4 At least every 10 years, the graduation line should be marked. 66. Avoid the opponent to avoid the cubic density value. The decimal point can be discarded from the complete installation number.
7 mark
The following product mark durability, follow the mark in the optimal case of the meter:) The unit of the scale is the ratio of the period \kmn
6) The mark of the meter is the meter of comfort. "Tian") is the specific meter of the year (mN/m\): play cooking, such as in the definition of the system A, the tension is different from the period of "low 5T" or the fee if the meter is used for the week before the liquid is worn, the name of the mark is: the meter is used for the bacteria! Yuanxiaochuang, such as in the liquid value not sent! Please note that the manufacturer's name or designation is for readers' reference only: the code for the test needle is:
! This standard specifies the number of labels that readers may wish to follow. Cai Ren
(I want to record the standard)
Classification of tension tables
G0/177642008/380 387,1977
This standard classifies the tension tables according to Table A.1 as the basis for accuracy and verification. The selected density allows the measurement of the appropriate accuracy. The tension classification given in the specification does not exclude the use of surface tension tables as the basis for density calculation. As long as the surface tension is marked in meters on the density scale, the text can be marked with a density meter. The following table contains the tension values of the liquid under test.
/R2/
density data
1+tt-.1 30o
536-240
1tce .. 2 0a
density meter attenuation surface tension standard classification
of the sea you wish "inflammation
should be the same lucky example
avoid the adjustment of thin image (including very continued observation, sexual secretion
shake the source of all points) and the new continent case
Meng Jun liquid needs energy device out of the method to try. Learn to do
good water can limit the special brand treatment
can wait for the skin to massage the water science stimulation, The finger device
micro-liquid drops into the micro-version of the game
qualities are very good 1302 style of business number wine
makeup, the performance of business feeling special micro-time #
water is played, the performance of the tomb is requested to wait for the slippery life, the secret excitement of the big and
dew liquid·removal service
in the game sound name this hot teaching money Hao Nan Road force to bet on the cat Fan so Ze Lang not the beauty of the moment in G3/1 17764--2008/10 387:1977 Road
English proposal to use density as the basic system of density meter. It is proposed to use density as the basic scale of density meter. Point #The following is the intention of the country: a floating Xie Kang in the static liquid service simple tube cross health density meter push open the part of the micro-body sales stock most density meter can be connected:, because the ratio of the position, you can directly determine the scale value by the volume of each item. The density of the part. Reason: Density is the most logical natural scale of density training. The following is a summary of the most uses of density meter:) To express the most physical,
) To limit the operation of a certain subject, use it as a waist. Estimate the mass of a liquid or prepare a liquid of known composition; use it to calculate the mass of a liquid of known volume. For materials, the density meter with the same density may be similar to any other density meter (because it can always be observed under the same fullness, use the density meter to calculate the density of the glass. The advantages of the density meter are very clear: with the help of the calibration device, it can be used! Anybody, this device is not only reliable with the density meter, but also can be used with other devices to determine the density. The density meter can be used with a simple table containing the fat way, thank you for the whip body. The national fertilizer density meter is applicable to all of these uses. You expect that these convenient services will appear because of the density of the meter that needs to be replicated and produced, but this advantage has unexpectedly shined in the world. Density has an advantage over relative density in that it has been taken through the air. Relative density also has this advantage. However, the concept of relative density is related to different degrees of exposure. It is more basic than density. It is often used as a ratio of the corrected air mass (i.e., the ratio of the corrected air mass). Sometimes, it is used as a test. The air is used to reduce this rate. Simply use a single-mass density meter, which will not cause uncertainty and error. The diagram in this world can be used to give full play to the air quality of the product. GB/T 17764-2008
China People's Xuanhe#
China Steam Bridge Ya
density meter standard and calibration source
C8:T 17764-2008/IS0 337,157? When the inspection approved the publication plan children service distribution
Beijing Faxingmenwai Yuanjiu North Street Station Ridge
Zhaowei Code: 100:15
Website spenet.ca
Tel: 86133346
68512>42
Zhongyin Edition Printing Guang
Xi Xinhua Book Sales
Format 836x1230 1/16
Zhang Xuejiao Huoxue
January 2035
2S Year 1 Use scissors--
1:155656333245
# price 14.C certificate
Good dance printing steamed shoes issued by this stove center adjustment version double disease stupid rights must be investigated
Micro report phone::010)68533533
1161:288 05/8007--
/Every doctorThe density classification given in the paper does not exclude the use of a surface tension gauge as the basis for density calculation, as long as the surface tension is marked in meters on the density scale. At the same time, a full-scale gauge can be used to measure the name of the liquid, and the tension value of the density is not a problem. 0a
densitometer attenuation surface tension standard classification
of the sea you wish "inflammation
should be the same lucky example
avoid adjustment of thin image (including very continued observation, sexual secretion
shake source are divided) and new continent case
Meng Jun liquid needs energy device out of the method to try. Learn to do
good water can limit the special brand treatment
can wait for the skin to rub the water science stimulation, The finger device
micro-liquid drops into the micro-version of the game
qualities are very good 1302 style of business number wine
makeup, the performance of business feeling special micro-time #
water is played, the performance of the tomb is requested to wait for the slippery life, the secret excitement of the big and
dew liquid·removal service
in the game sound name this hot teaching money Hao Nan Road force to bet on the cat Fan so Ze Lang not the beauty of the moment in G3/1 17764--2008/10 387:1977 Road
English proposal to use density as the basic system of the density meter. It is proposed to use density as the basic scale of the density meter. Point #The following is the intention of the country: the density meter is the most important part of the liquid in the static liquid service simple tube cross health density meter push open the part of the micro-volume sales share equal:, because the position of the part, you can directly determine the scale value by the volume of each item. Part of the density. Reason: Density is the most logical natural scale of density. The following is a summary of the most common uses of the density meter:) To express the volume of a substance,
) To limit the operation of a certain subject, it is used to estimate the content of a certain liquid or prepare a liquid of known value; to calculate the mass of a liquid of a known volume. The volume of liquid in the share. For the material, the density meter with retention degree is similar to any other density (because it can always observe under the same fullness, use the density meter to obtain the glass content of the material. The advantage of the density meter is that it is very suitable for the material. This is because it can be used for any material. It can not only be used with the density meter, but also can be used with other materials to determine the density. The density meter can be used in a simple form to contain the fat way, thank you for the whip. The national fertilizer density meter is suitable for all these uses. You can use any density meter to calculate the density of the material. The reason why it appears is that it has the ability to calculate the density of the material. It needs to be copied and produced, but this advantage has been unexpectedly shining in the world. Density has an advantage over relative density in that it has been taken through the air. Relative density also has this advantage. However, the concept of relative density is related to different degrees of exposure. It is more basic than density. It is often used as a ratio of the corrected air mass (i.e., the ratio of the corrected air mass). Sometimes, it is used as a test. The air is used to reduce this rate. Simply use a single-mass density meter, which will not cause uncertainty and error. The diagram in this world can be used to give full play to the air quality of the product. GB/T 17764-2008
China People's Xuanhe#www.bzxz.net
China Steam Bridge Ya
density meter standard and calibration source
C8:T 17764-2008/IS0 337,157? When the inspection approved the publication plan children service distribution
Beijing Faxingmenwai Yuanjiu North Street Station Ridge
Zhaowei Code: 100:15
Website spenet.ca
Tel: 86133346
68512>42
Zhongyin Edition Printing Guang
Xi Xinhua Book Sales
Format 836x1230 1/16
Zhang Xuejiao Huoxue
January 2035
2S Year 1 Use scissors--
1:155656333245
# price 14.C certificate
Good dance printing steamed shoes issued by this stove center adjustment version double disease stupid rights must be investigated
Micro report phone::010)68533533
1161:288 05/8007--
/Every doctorThe density classification given in the paper does not exclude the use of a surface tension gauge as the basis for density calculation, as long as the surface tension is marked in meters on the density scale. At the same time, a full-scale gauge can be used to measure the name of the liquid, and the tension value of the density is not a problem. 0a
densitometer attenuation surface tension standard classification
of the sea you wish "inflammation
should be the same lucky example
avoid adjustment of thin image (including very continued observation, sexual secretion
shake source are divided) and new continent case
Meng Jun liquid needs energy device out of the method to try. Learn to do
good water can limit the special brand treatment
can wait for the skin to rub the water science stimulation, The finger device
micro-liquid drops into the micro-version of the game
qualities are very good 1302 style of business number wine
makeup, the performance of business feeling special micro-time #
water is played, the performance of the tomb is requested to wait for the slippery life, the secret excitement of the big and
dew liquid·removal service
in the game sound name this hot teaching money Hao Nan Road force to bet on the cat Fan so Ze Lang not the beauty of the moment in G3/1 17764--2008/10 387:1977 Road
English proposal to use density as the basic system of the density meter. It is proposed to use density as the basic scale of the density meter. Point #The following is the intention of the country: the density meter is the most important part of the liquid in the static liquid service simple tube cross health density meter push open the part of the micro-volume sales share equal:, because the position of the part, you can directly determine the scale value by the volume of each item. Part of the density. Reason: Density is the most logical natural scale of density. The following is a summary of the most common uses of the density meter:) To express the volume of a substance,
) To limit the operation of a certain subject, it is used to estimate the content of a certain liquid or prepare a liquid of known value; to calculate the mass of a liquid of a known volume. The volume of liquid in the share. For the material, the density meter with retention degree is similar to any other density (because it can always observe under the same fullness, use the density meter to obtain the glass content of the material. The advantage of the density meter is that it is very suitable for the material. This is because it can be used for any material. It can not only be used with the density meter, but also can be used with other materials to determine the density. The density meter can be used in a simple form to contain the fat way, thank you for the whip. The national fertilizer density meter is suitable for all these uses. You can use any density meter to calculate the density of the material. The reason why it appears is that it has the ability to calculate the density of the material. It needs to be copied and produced, but this advantage has been unexpectedly shining in the world. Density has an advantage over relative density in that it has been taken through the air. Relative density also has this advantage. However, the concept of relative density is related to different degrees of exposure. It is more basic than density. It is often used as a ratio of the corrected air mass (i.e., the ratio of the corrected air mass). Sometimes, it is used as a test. The air is used to reduce this rate. Simply use a single-mass density meter, which will not cause uncertainty and error. The diagram in this world can be used to give full play to the air quality of the product. GB/T 17764-2008
China People's Xuanhe#
China Steam Bridge Ya
density meter standard and calibration source
C8:T 17764-2008/IS0 337,157? When the inspection approved the publication plan children service distribution
Beijing Faxingmenwai Yuanjiu North Street Station Ridge
Zhaowei Code: 100:15
Website spenet.ca
Tel: 86133346
68512>42
Zhongyin Edition Printing Guang
Xi Xinhua Book Sales
Format 836x1230 1/16
Zhang Xuejiao Huoxue
January 2035
2S Year 1 Use scissors--
1:155656333245
# price 14.C certificate
Good dance printing steamed shoes issued by this stove center adjustment version double disease stupid rights must be investigated
Micro report phone::010)68533533
1161:288 05/8007--
/Every doctorC certificate
Good dance printing steamed shoes issued by the stove center to adjust the version of the double disease stupid rights must be investigated
Micro report phone:: 010) 68533533
1161: 288 05/8007--
/Every doctorC certificate
Good dance printing steamed shoes issued by the stove center to adjust the version of the double disease stupid rights must be investigated
Micro report phone:: 010) 68533533
1161: 288 05/8007--
/Every doctor
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.