title>QB/T 2175.6-1995 Copy Gong - QB/T 2175.6-1995 - Chinese standardNet - bzxz.net
Home > QB > QB/T 2175.6-1995 Copy Gong
QB/T 2175.6-1995 Copy Gong

Basic Information

Standard ID: QB/T 2175.6-1995

Standard Name: Copy Gong

Chinese Name: 抄锣

Standard category:Light Industry Standard (QB)

state:in force

Date of Release1995-10-24

Date of Implementation:1996-06-01

standard classification number

Standard Classification Number:Light Industry, Culture and Living Goods>>Culture, Education, Sports and Entertainment Goods>>Y58 Musical Instruments

associated standards

alternative situation:ZB Y58002.6-89

Publication information

publishing house:China Light Industry Press

Publication date:1996-06-01

other information

drafter:Gao Yongcuo, Gao Jianjun

Drafting unit:Wuhan Gong Factory

Focal point unit:National Center for Musical Instrument Standardization

Proposing unit:Quality Standards Department of China Light Industry Federation

Publishing department:China Light Industry Federation

Introduction to standards:

This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation, storage, etc. of the Chaoluo. This standard applies to the Chaoluo, a brass-bodied musical instrument. QB/T 2175.6-1995 Chaoluo QB/T2175.6-1995 Standard download decompression password: www.bzxz.net

Some standard content:

Light Industry Industry Standard of the People's Republic of China
Subject content and scope of application
QB/T2175.6—1995
This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation, storage, etc. of the gong. This standard applies to the gongs in brass-bodied sounding instruments. 2 Reference standards
QB/T2175.1 General technical conditions for brass-bodied sounding instruments 3 Product classificationWww.bzxZ.net
The gongs are divided into small gongs, medium gongs and large gongs. 3.1
3.2 The specifications of the gongs shall comply with the provisions of Table 1. Table 1
Outer diameter, mm
Small gongs
Medium gongs
Large gongs
4 Technical requirements
Basic dimensions
4.1 The main tone characteristics shall comply with the provisions of Table 2. Approved by China Light Industry General Association on October 24, 1995
Limit deviation
Mass, kg
1.45~1.85
1.75~2.15
2.15~2.75
2.95~3.55
3.80~4.50
4.95~6.55
6. 00~~8. 00
7.20~9.80
8.50~11.50
10.30~13.70
13.30~~16.70
15. 10~18. 90
17.50~21.50
1996-06-01 implementation
Small copy gong
Medium copy gong
Large copy gong
QB/T 2175. 6-1995
Appearance quality and other technical requirements shall comply with the provisions of QB/T2175.14.2
5Test method
Should comply with the provisions of QB/T2175.1.
6Inspection rules
Should comply with the provisions of QB/T2175.1.
Marking, packaging, transportation, storage
Should comply with the provisions of QB/T2175.1.
Additional remarks:
This standard is proposed by the Quality Standards Department of China Light Industry Association. This standard is under the jurisdiction of the National Musical Instrument Standardization Center. This standard was drafted by Wuhan Gong Factory.
The main drafters of this standard are Gao Yongquan and Gao Jianjun. Main sound characteristics
Play the kuang sound, deep and thick
Play the kua sound, deep and thick
Play the duang sound, deep and thick
From the date of implementation of this standard, the professional standard ZBY58002.6-1989 "Chao Luo" issued by the former Ministry of Light Industry will be invalid. -riKAoNiKAca-
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.