Types basic parameters and dimensions of three phase plugs and sockets
Basic Information
Standard ID:
GB/T 1003-1980
Standard Name:Types basic parameters and dimensions of three phase plugs and sockets
Chinese Name:
三相插头插座 型式 基本参数与尺寸
Standard category:National Standard (GB)
state:in force
Date of Release1980-12-01
standard classification number
Standard Classification Number:General>>Standardization Management and General Regulations>>A00 Standardization, Quality Management
associated standards
Publication information
other information
Introduction to standards:
GB/T 1003-1980 Basic parameters and dimensions of three-phase plugs and sockets GB/T1003-1980 standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Types, basic parameters and dimensions of three-phase plugs and sockets
This standard applies to three-phase four-pole ordinary power plugs and sockets. GB 1003-
Replaces GB1003-67Www.bzxZ.net
The above plugs and sockets are used to connect portable three-phase electrical appliances to the power supply. The types, basic parameters and dimensions of plugs and sockets with a maximum working voltage of 500 volts shall comply with the provisions of the following figure and table. Basic parameters
Rated voltage
(I)
Rated current
(A)
9.5±0.1/10.3±0.1.310.1
17.5±0.1
17.5±0.1
17.5 ± 0. 1
21 ± 0.1
General Administration of Standards of the People's Republic of China
Product release
The First Ministry of Machinery Industry of the People's Republic of China proposed
12 ± 0.1
15 ± 0.1
(mm)
Implemented on January 1, 1981
Guangzhou Electric Science Research Institute
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.