Some standard content:
ICS 55. 100
People's Republic of China Packaging Industry Standard
BB/T 0048-2007
Composite anti-counterfeit bottle cap
Composite anti-counterfeit closures2007-03-06Released
2007-09-01Implemented
Released by the National Development and Reform Commission
Announcement of the National Development and Reform Commission of the People's Republic of China
No. 16 of 2007
The National Development and Reform Commission approved 207 industry standards including "Passenger Car Categories and Codes" (see the attachment for standard numbers, names and starting implementation dates), including 7 automotive industry standards, 177 machinery industry standards, 9 packaging industry standards, 7 ferrous metallurgy industry standards, and 7 pharmaceutical equipment industry standards, which are now announced
The above automotive, packaging, and pharmaceutical equipment industry standards are published by China Planning Press, the machinery industry standards are published by Machinery Industry Press, and the ferrous metallurgy industry standards are published by Metallurgical Industry Press.
Appendix: Numbers, names and implementation dates of 9 packaging industry standards National Development and Reform Commission of the People's Republic of China March 6, 2007
Appendix:
Standard number
Numbers, names and implementation dates of 9 packaging industry standards Standard name
RB/T00402007
BB/T 0041---2007
BB/T 0042--2007
BB/T0043—2007
BB/T 0044—2007
BB/T 0045—2007
BB 0046-2007
BB/T 0047—2007
BB/T 0048--2007
Assembled plywood boxes
General rules for multi-layer barrier films for packaging
Packing containers lead pesticide bottles
Plastic logistics turnover boxes
Packing containers plastic pesticide bottles
Pulp molding industrial product packaging
Aerosol ribbons
Aerosol paint
Combined anti-counterfeiting bottle caps
Implementation date
2007-09-01
2007-09-01
2007-09-01
2007-09-01
2007-09-01
2007-09-01
2007-09-01
2007-09-01
2007-09-01
Normative reference documents
3 Terminology
4 Product classification and specifications
Test methods·
Inspection rules
8 Marking, packaging, transportation and storage
Appendix A (informative) Bottle mouth dimension deviation target
BB/T 0048-2007
BB/T 0048-2007
Appendix A of this standard is an informative appendix.
This standard is proposed by the China Packaging Federation. Foreword
This standard is issued by the National Technical Committee for Packaging Standardization. The drafting units of this standard are: Yantai Haipu Cap Co., Ltd., National Packaging Product Quality Supervision and Inspection Center (Guangzhou), Shandong Lipeng Packaging Co., Ltd., Zhejiang Xinde Packaging Co., Ltd. The main drafters of this standard are: Huang Yonghong, Lu Ming, Xiu Yanhua, Zhu Liping, Qu Weiqiang, Chen Jian, Qiu Mingliang, Sun Ping, Dong Dianlei, 1 Scope
Combined anti-counterfeiting bottle caps
BB/T0048—2007
This standard specifies the terms, product classification and specifications, requirements, test methods, inspection rules and markings, packaging, transportation and storage of combined anti-counterfeiting bottle caps for packaging of alcoholic beverages, condiments, health products, cosmetics, etc. This standard is applicable to combined anti-counterfeiting bottle caps (hereinafter referred to as bottle caps) formed by aluminum plate coatings and plastic parts (such as polyethylene, polyolefins, ethylene, etc.), glass parts, etc. Bottle caps for other packaging such as medicines can refer to this standard for implementation. 2 Normative References
The clauses in the following documents become the clauses of this standard through the reference of the following standards. For all the referenced documents with a date, all the subsequent amendments (excluding the contents of errata) or revisions are not applicable to this standard. However, the parties who reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all the referenced documents without a date, the latest version is applicable to this standard. GB191 Pictorial marking for packaging storage and transportation
GB/T2828.1 Inspection procedure for sampling by attributes Part 1: Sampling plan for batch inspection based on acceptance quality limit (AQL) GB/T2829 Inspection procedure and table for sampling by attributes for periodic inspection (applicable to inspection of process stability) CB/T5009.60 Analysis method for polyethylene, poly(ethylene) and poly(propylene) moldings for food packaging CB/T6739 Pencil method for determination of coating hardness
GB9685
Food containers. Hygienic standard for additives used in packaging materials Hygienic standard for polyethylene moldings for food packaging GB9687
GB9688 Hygienic standard for polyolefin moldings for food packaging CB14942 Hygienic standard for polycarbonate moldings for food containers and packaging materials GB17326 Hygienic standard for rubber-modified acrylonitrile-butadiene-styrene moldings for food containers and packaging materials 3 Terms
The following terms and definitions apply to this standard. 3.1
Combined anti-counterfeit bottle caps compositeanti-counterfeitclosures A combination of aluminum plate coatings and plastic parts or various plastic parts, which cannot be restored after being sealed, opened and used. 3.2
Combined aluminum-plastic compositeanti-counterfeitclosures A combination of aluminum parts on the outside and various non-reactive plastic parts and glass parts on the inside. 3.3
Combined plastic anti-counterfeit bottle caps plastic compositeanti-counterfeitclosures A combination of anti-counterfeit bottle caps composed of various plastic parts and glass parts. BB/T0048—2007
4 Product classification and specifications
4.1. Product classification
4.1.1 According to the materials used, they are divided into combined aluminum-plastic anti-counterfeit bottle caps and combined plastic anti-counterfeit bottle caps. 4.1.2 According to the combination mode with the bottle mouth and the lifting mode, it can be divided into: threaded twist-off type, card-type top opening type, card-type twist-off type, card-type bursting type, card-type twist-out type, toothed twist-out type and other combinations and opening methods. 4.2 Product specifications
The specifications of the bottle cap are suitable for the standard bottle mouth of bottles with a diameter of Φ22mm to 36mm, and other bottle mouths agreed by the supply and demand parties. For the size deviation of the bottle mouth, please refer to Appendix A:
5 Requirements
5.1 Dimensions
The size deviation of the bottle cap shall comply with the provisions of Table 1. Table 1 Dimension Deviation
Twist-off type
Burst type
Top opening type
Screw-out type
5.2 Appearance quality
5.2.1 The surface is clean and has no obvious defects.
Allowable deviation of height, mm
+0.3/-0.5
Allowable deviation of diameter, 1mm
5.2.2 The connection points of the anti-counterfeiting are intact and undamaged, the surface contact depth is not more than 0.3mm, the area is not more than 3mm×3mm, and the contact is not more than 2 places:
.5.2.3 The printing tone is clear and distinct, the printed pattern and text are complete, there is no obvious missing printing or scratches, and there should be no redundant printing in the place without pattern. 5.2.4 The position deviation of the center of the top printed pattern from the center of the outer diameter of the bottle cap is not more than 0.6mm5.2.5 The height deviation of the bottom edge of the printed pattern from the cover is ±0.20mm, the joint misalignment is not more than 0.30mm, the joint overlap is not more than 1.5mm, and there is no gap in the joint.
5.2.6 When cutting grooves, the misalignment shall not exceed 0.2mm5.2.7 The rolling (tooth rolling) shall be beautiful and without reverse teeth, the depth shall not be less than 0.2mm, the number of overlapping teeth shall not be more than 3, and the number of empty teeth shall not be more than 15.3 Physical and chemical properties
The color difference between the same batch shall comply with the provisions of Table 2. Color difference between the same color in the same batch
Indicator name
Color difference between the same batch
CIE L'α'-
Indicator value
L\≤50.00
5.3.2 When there is a coating on the surface of the bottle cap, the hardness of the coating shall not be less than 2H pencil hardness. 5.3.3 The temperature resistance shall comply with the requirements of Table 3. Table 3 Temperature resistance
Low temperature resistance
High temperature resistance
5.4 Functional characteristics
5.4.1 Sealing performance.
5.4.1.1 After the sealing performance test, no liquid leakage occurs. Refers to
RB/T0048—2007
-24℃, no bursting, no deformation, no leakage 40%, no bursting, no deformation, no leakage
5.4.1.2 After the bottle cap is tightened after opening, no liquid leakage occurs after the sealing performance test. 5.4.2 Opening torque
Opening torque 0.5N·m~2.5N·m.
5.4.3 Outflow performance.
The rated capacity of alcohol with a concentration of 40%±5% is poured out within 100g. 5.4.4 Anti-counterfeiting performance
After opening, the structure is obviously damaged, easy to identify and cannot be restored to its original state. 5.4.5 Anti-reverse filling performance.
For bottle caps with anti-reverse filling performance requirements, when statically flushed, the liquid pours into the cap without leaking into the bottle. 5.5 Hygiene requirements
5.5.1 The parts of the bottle cap that are in direct contact with the liquid and the additives used in the production process shall comply with the corresponding food hygiene standards such as CB9685, GB9687GB9688.GB14942, CB17326, etc. 5.5.2 No residue larger than 0.5mm or silk larger than 2mm is allowed. 5.5.3 No special taste.
5.5.4 No fats can appear.
6 Test method
6.1 Dimension measurement
Use a vernier caliper with an accuracy of 0.02mm or a special measuring tool for detection. 6.2 Appearance quality inspection
6.2.1 Oral measurement, hand feel and general measuring tool inspection, 6.2.2 Item pattern position deviation: Use a vernier caliper with an accuracy of 0.02mm to measure the blank width of the largest and smallest symmetrical parts of the sample; pattern center deviation value a=（6，-，）/2: See Figure 16.2.3 The height of the bottom margin of the printed pattern from the cover is detected with a vernier caliper with an accuracy of 0.02mm, and the joint misalignment, groove misalignment, and knurling (gear hobbing) depth are detected with a projector and a reading magnifying glass. 6.3 Physical and chemical performance inspection
BB/T 0048-2007
6.3.1 Color difference inspection of the same color in the same batch.
Use a colorimeter to measure the color difference (△E) of the same color and the same part of the sample and the reference. 6.3.2 The hardness inspection of the external surface coating is carried out in accordance with GB/T6739. 6.3.3 Heat resistance test.
6.3.3.1 Fill the appropriate sample bottle with 75% dyeing alcohol to the rated capacity, seal it and place it upside down in a freezer, adjust the temperature to -24℃, and after stabilizing for 24 hours, check whether the bottle cap is cracked, deformed, or leaking; 6.3.3.2 Fill the appropriate sample bottle with 75% dyeing alcohol to the rated capacity; seal it and place it upside down in a constant temperature box, adjust the temperature to 40℃, and after stabilizing for 24 hours, check whether the bottle cap is cracked, deformed, or leaking. 6.4 Functional property test
6.4.1 Sealing performance test.
The daily inspection of sealing performance can be carried out in accordance with the provisions of 6.4.1.1 and 6.4.1.2. The arbitration method of sealing performance shall be carried out in accordance with the provisions of 6.4.1.3 and 6.4.1.4.
6.4.1.1 In an applicable sample bottle, fill it with 75% dyeing alcohol to the rated capacity, seal it, and invert it in a vacuum electric drying oven. Adjust the pressure to 0.03.MPa and the temperature to 35°C. After stabilizing for 10 minutes, check for liquid. 6.4.1.2 In an applicable sample bottle, fill it with 75% dyeing alcohol to the rated capacity, seal it, open it, and tighten it. Invert it in a vacuum electric drying oven. Adjust the pressure to 0.03MPa and the temperature to 35°C. After stabilizing for 10 minutes, check for liquid leakage. 6.4.1.3 In an applicable sample bottle, fill it with 75% dyeing alcohol to the rated capacity, seal it, and invert it for 8 hours to check for liquid leakage.
6.4.1.4 Fill the appropriate sample bottle with 75% dyed alcohol to the rated capacity, seal it, open it and tighten it, invert it for 8 hours and check for leakage.
6.4.2 Opening torque test.
Seal it on the appropriate sample bottle and use a torque meter to measure the torque when opening. 6.4.3 Flow performance test
Fill the appropriate sample bottle with 40%±5% alcohol to the rated capacity, seal it, open it and place it on a 45° tilted stand and measure with a stopwatch.
6.4.4 Anti-counterfeiting performance test.
Seal it on the appropriate sample bottle and observe it after opening. 6.4.5 Backflow performance test.
BB/T 00482007
Pour 40%±5% alcohol slowly into the cap of the opened static upright bottle, and observe after 1 minute. 6.5 Hygiene requirements inspection
6.5.1 Material hygiene index inspection shall be carried out in accordance with GB/T5009.60GB17326, GB14942 and other relevant standards. 6.5.2 Foreign matter inspection: Pour a proper amount of pure water into the clean applicable sample bottle, rinse it up and down 12 times after sealing, and observe whether there is any foreign matter in the bottle.
6.5.3 No odor inspection: Smell and inspect whether the bottle cap has any odor. 6.5.4 Grease inspection: Fill the clean sample bottle with pure water to the rated capacity, shake it up and down for 1 minute after sealing, invert it at room temperature for 24 hours, and shake it for 30 seconds every 8 hours to observe whether there is grease on the liquid surface. 7 Inspection rules wwW.bzxz.Net
The inspection of bottle caps is divided into factory inspection and type inspection. The number of unqualified products per hundred units is counted. 7.1 Factory inspection
7.1.1 Factory inspection is carried out in accordance with the provisions of (:B/T2828.1, and the normal inspection secondary sampling plan is used. 7.1.2 The items, inspection levels and acceptance quality limits of factory inspection are shown in Table 4. Table 4 Factory inspection
Inspection items
Sealing performance
Color difference of the same batch
Appearance quality
7.2 Type inspection
Corresponding clauses
Technical requirements
Inspection method
Acceptance quality limit (AQL)
Type inspection shall be conducted at least once every six months, and shall also be conducted when accepting materials or changing processes. 7.2.1
7.2.2 Type inspection items are all requirements of Chapter 5. Inspection level
Type inspection shall be conducted in accordance with the provisions of (B/T2829, using the secondary sampling plan of discrimination level IⅡ; material hygiene inspection shall be conducted in accordance with the provisions of 7.2.3
GB/T 5009.60, GB 17326, GB 14942 and other standards. 7.2.4 The items, unqualified quality level (RQL), sample size and judgment number of type inspection are specifically shown in Table 5.5
RB/T 00482007
Inspection items
Lipids
Sealing performance
Opening torque
Heat resistance
Outflow performance
Anti-counterfeiting performance
Anti-reverse filling performance
Color difference of the same batch and the same color
Coating degree
Appearance quality
8 Marking, packaging, transportation and storage
8.1 Marking
Type inspection
Corresponding clauses
Technical requirements
Inspection method
Unindividual quality level
Sample size
n = nz =20
n = n2 =16
n=ng =16
Judgment number red
_A,A,,R,,R,1
[0,1,2,2]
[0,1,2,2.
[0,3,3.4]
[1,4,3,3]
8.1.1 The packer should have the product name, production batch number, specification, number, manufacturer, production date, and the size of the packaging box. The packaging box 1 or the box should have the product inspection certificate. ||tt ||8.1.2 The surface of the packaging box should be marked with packaging and storage signs such as "Handle with care" and "Avoid moisture", and the signs should comply with the provisions of GB/F191. 8.2 Packaging
8.2.1 The outer packaging of the bottle caps should be made of corrugated paper boxes and boxed with tape, and the inner packaging should be plastic bags and sealed. 8.2.2, according to needs, isolation pads can be added between the bottle caps, and single bottle caps can be covered with plastic sleeves or small plastic bags. 8.2.3 The packaging materials in contact with the bottle caps should meet the hygienic requirements of the sealing materials. 8.3 Transportation
The means of transportation should be clean and dry, without odor. During transportation, it should be loaded and unloaded gently, and throwing is strictly prohibited. Avoid rain and exposure. 8.4 Storage
8.4.1 The product should be stored in a ventilated and dry place, and the storage period shall not exceed 24 months. 8.4.2 When the storage temperature is lower than 15%℃, it should be placed in an environment higher than 15℃ for 24 hours before use. 8.4.3 It is not allowed to be stored in an environment with coupons or special materials. The bottom layer should have a ground pad.
Appendix A
(Informative Appendix)
Bottle mouth size deviation
BB/T 00482007
A.1 Schematic diagrams of threaded bottle mouth, lower bottle mouth and toothed bottle mouth are shown in Figures A.1 to A.3. The small deviation of bottle mouth size is in accordance with Table A.12
Threaded bottle mouth
Card bottle mouth
Toothed bottle mouth
Threaded bottle mouth
Card bottle mouth
Table A.1 Bottle mouth size deviation
First diameter deviation, mm
Toothed bottle mouth
Commodity deviation, mm
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.