JB/T 2983.1-1998 Track rollers for crawler bulldozers
Basic Information
Standard ID:
JB/T 2983.1-1998
Standard Name: Track rollers for crawler bulldozers
Chinese Name:
履带式推土机 支重轮
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1998-09-30
Date of Implementation:1998-12-01
standard classification number
Standard ICS number:Material storage and transportation equipment >> 53.100 Earthmoving machinery
Standard Classification Number:Engineering Construction>>Construction Machinery and Equipment>>P97 Construction Machinery for Building Engineering
Publication information
publishing house:Mechanical Industry Press
Publication date:1998-12-01
other information
drafter:Li Mingxiang, Yan Huazhong, Cai Zuliang, Wang Jiurong
Drafting unit:Tianjin Engineering Machinery Research Institute of the Ministry of Machinery Industry, Hubei Xianning Engineering Machinery Factory, Jiangsu Kunshan Tool Factory
Focal point unit:Engineering Machinery Standardization Technical Committee of the Ministry of Machinery
Proposing unit:Engineering Machinery Standardization Technical Committee of the Ministry of Machinery
Publishing department:State Machinery Industry Bureau
Introduction to standards:
This standard specifies the structure and main dimensions, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of track-type bulldozer track roller assemblies. This standard applies to track-type bulldozer track rollers (hereinafter referred to as track rollers) with track pitches of 203A, 203B, 216, and 228.6 mm, and also applies to track-type bulldozers, pipelayers, well-draining machines, and loaders with the same pitch, and can be used as a technical reference for track rollers of other pitches. JB/T 2983.1-1998 Track-type bulldozer track rollers JB/T2983.1-1998 Standard download decompression password: www.bzxz.net
Some standard content:
ICS53.100
Machinery Industry Standard of the People's Republic of China
JB/T2983.1-1998
Crawler bulldozer
Supporting wheels
Crawlerbulldozer-Trackrollers1998-09-30Published
State Machinery Industry Bureau
Implementation on 1998-12-01
JB/T2983.1-1998
This standard is a revision of JB298381 "Supporting wheels for crawler bulldozers". Compared with JB2983-81, the main technical content of this standard has been changed as follows: the data of backward products in the series have been eliminated, and the figures and tables of the structure and size of each part have been deleted: - cast steel is no longer used for the wheel body, and materials with good performance and high strength are added: - the floating seal ring and floating seal rubber ring are included in the category of standard parts: the test method clause is included:
- percentage sampling is abolished, and GB2828-87 "Batch Inspection Count Sampling Procedure and Sampling Table (Applicable to Continuous Batch Inspection)" is implemented. This standard will replace JB2983-81 from the date of implementation. This standard is proposed and managed by the Engineering Machinery Standardization Technical Committee of the Ministry of Machinery Industry. The responsible drafting units of this standard are: Tianjin Engineering Machinery Research Institute of the Ministry of Machinery Industry, Hubei Xianning Engineering Machinery Factory, Jiangsu Kunshan Tool Factory, and Yantai Tractor Parts Factory.
Participating drafting units of this standard are: the 6411th Factory of the Chinese People's Liberation Army, the 6444th Factory of the Chinese People's Liberation Army, and Dashiqiao Tractor Parts Factory. bZxz.net
The main drafters of this standard are Li Mingxiang, Yan Huazhong, Cai Zuliang and Wang Jiurong.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.