GB/T 18455-2010 Packaging Recycling Mark GB/T18455-2010 Standard download decompression password: www.bzxz.net
This standard specifies the material identification marks and labeling requirements for recyclable packaging containers and packaging components. This standard applies to recyclable packaging containers or packaging components such as paper, plastic, aluminum and iron.
This standard replaces GB18455-2001 "Packaging Recycling Mark".
Compared with GB18455-2001, the main changes of this standard are as follows:
———The nature of the standard is changed to recommendation;
———The terms and definitions in Chapter 3 are revised;
———The "reusable", "containing recycled materials" and "green dot" marks in Chapter 4 are deleted, and the marks of "paper", "aluminum" and "iron" are added;
———The abbreviation of plastic "HDPE" is changed to "PE-HD", and "LDPE" is changed to "PE-LD".
This standard is proposed and managed by the National Technical Committee for Packaging Standardization (SAC/TC49).
This standard is drafted by the China Export Commodity Packaging Research Institute, and the Circular Economy Committee of the China Packaging Federation participated in the drafting.
The main drafters of this standard are: Wang Yuande, Guo Zhenmei, Sun Qi, Zhang Hong, and Zhu Jing.
The previous versions of the standards replaced by this standard are:
———GB18455—2001.
Normative references
The following documents are indispensable for the application of this document. For all references with dates, only the versions with dates apply to this document
. For all references without dates, the latest versions (including all amendments) apply to this document.
GB/T1844.1 Plastics symbols and abbreviations Part 1: Basic polymers and their characteristic properties (GB/T1844.1—2008,
ISO1043-1:2001, IDT)
GB/T16288—2008 Marking of plastic products
GB/T16716.1 Packaging and packaging waste Part 1: General principles for treatment and utilization
GB/T16716.2 Packaging and packaging waste Part 2: Evaluation methods and procedures

ICS 55.020
National Standard of the People's Republic of China
GB/T18455—2010
Replaces GB18455—2001
Package recycling mark
Package recycling marking
Released on August 9, 2010
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Standardization Administration of China
Contains product partner network
Implemented on January 1, 2011
This standard replaces GB18455--2001 "Packaging Recycling Marking". Compared with GB184552001, this standard has the following major changes: 1. The nature of the standard has been changed to recommendation;
The terms and definitions in Chapter 3 have been modified;
GB/T18455-2010
- The "reusable", "contains recycled materials" and "green dot" marks in Chapter 4 have been deleted, The symbols of "paper", "diamond" and "iron" have been added; the abbreviation of plastic "HDPE\" has been changed to "PE-HD", and "LDPE" has been changed to "PE-ID". This standard is proposed and managed by the National Technical Committee for Packaging Standardization (SAC/TC49). This standard was drafted by the China Export Commodity Packaging Research Institute, and the Circular Economy Committee of the China Packaging Federation participated in the drafting. The main drafters of this standard are: Wang Yuande, Guo Zhenmei, Sun Qi, Zhang Hong, and Zhu Jing. The previous versions of the standards replaced by this standard are: GB184552001.
://foodmate.net
http://
Packaging Recycling Mark
GB/T 18455—2010
This standard specifies the material identification marks and labeling requirements for recyclable packaging containers and packaging components. This standard applies to recyclable packaging containers or packaging components such as paper, plastic, aluminum and iron. 2 Normative references
The following documents are indispensable for the application of this document. For any dated referenced document, only the dated version applies to this document. For any undated referenced document, the latest version (including all amendments) applies to this document. GB/T1844.1 Plastic symbols and abbreviations Part 1: Basic polymers and their characteristic properties (GB/T1844.1--2008, ISO1043-1:2001, IDT)
GI3/T 16288—2008
Marking of plastic products
GB/T16716.1 Packaging and packaging waste Part 1: General principles for treatment and utilization GB/T16716.2 Packaging and packaging waste Part 2: Assessment methods and procedures 3 Terms and definitions
The terms established in GB/T16716.1 and the following terms apply to this standard. 3.1
Supplicr
The operator responsible for the product and its packaging placed on the market: 3.2
Packaging componentpackagingcomponent
The component of the packaging that can be separated by hand or by simple physical means. 3.3
Complex packaging materialcomplex packaging materialPackaging material with specific functions formed by two or more materials through processes such as heat sealing or bonding. 4 Marks
Common packaging recycling marks
The recycling marks and their descriptions of common packaging materials are shown in Table 1. The codes and abbreviations of plastic packaging materials and their marking methods are shown in 4.2. Table 1 Recycling marks for common packaging materials
Material name
Recycling marks
http
Applicable to paper boxes, cartons and pulp molding products. "Paper" can be marked below the mark
The figure is only a basic graphic.
GB/T 18455—2010
Material name
4.2 Recycling marks for plastic packaging
General recycling marks for plastic packaging
Table 1 (continued)
Recycling marks
"Lead" can be marked below the mark.
"Iron\" can be marked below the mark.
General plastic packaging recycling marks shall be marked in accordance with Appendix A of GB/T16288--2008. Table 2 gives the plastic codes and abbreviations commonly used in packaging. Figure 1 gives a marking example. Table 2 Common plastic codes and abbreviations
Material terms
Abbreviations
Polyethylene terephthalate
Commercial density
Sanshin
Low density
Polyethylene
Figure 1 Marking example of general plastic packaging recycling marks 4.2.2 Biodegradable plastic packaging recycling mark Polypropylene
When the biodegradable plastic used for packaging is not included in GB/T 16288-2008 Appendix A. Its recycling mark is shown in Figure 2. The code \00\ in the biodegradable plastic mark means "biodegradable". The abbreviation ×××× is shown in GB/T1844.1. When it is necessary to express the biodegradable technical conditions of the material, a brief text description can be marked below or on the left and right sides of the mark. 00
2 Example of marking the recycling mark of biodegradable plastic packaging 4.3 Packaging recycling mark for composite packaging materials Packaging recycling mark for composite packaging materials The main material of the packaging recycling mark is marked according to Table 1. The main material refers to the material with the highest effective calorific value in energy recovery. When the main material is plastic, it shall be marked according to 4.2 5 Requirements
5.1 Suppliers shall pre-evaluate the packaging containers or packages put on the market according to GB/T16716.1, GB/T16716.2 and their referenced standards. 2||t t||http
foodmate.net
NTEATEIT
GB/T18455—2010
Whether the packaging components can be recycled, when it is determined that recycling is feasible, the packaging recycling mark should be marked. 5.2 When the packaging is composed of multiple packaging components, the packaging recycling mark should be marked on each recyclable packaging component. When the packaging components are limited by function, structure, appearance or area, the packaging recycling mark may not be marked. 5.3
The marking of the packaging recycling mark on the packaging container or packaging component should be appropriate in proportion, clear and firm, and eye-catching and easy to identify. 5.4
5.5 The packaging recycling mark can be marked by printing, screen printing, labeling, molding and other recognizable methods. http://foodmate.netEE
GB/T 18455-2010
Printing period: November 1, 2010 F017
htt
People's Republic of China
National Standard
Packaging Recycling Mark
GB/T18455—2010
Published and distributed by China Standards Press
No. 16, Sanlihebei Street, Fuxingmenwai, Beijing
Postal code: 100045
Website: www, spc, net, cnWww.bzxZ.net
Tel: 6852394668517548
Printed by China Standards Press, Anhuangdao Printing Factory, distributed by Xinhua Bookstores in various places
Format: 880×1230 1/16 print sheet 0.5 words 6 Xia Ning September 2010 first edition September 2010 first printing 5 Price 14.00 yuan
Book number: 1550661-40275
If there is any printing error, the publishing center of our company will replace it. Copyright infringement will be investigated
Report phone: (010) 68533533
odmatenet
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.