GB/T 15826.7-1995 Machining allowances and tolerances of hammer-forged steel free forgings - Step shafts

Basic Information

Standard ID: GB/T 15826.7-1995

Standard Name: Machining allowances and tolerances of hammer-forged steel free forgings - Step shafts

Chinese Name: 锤上钢质自由锻件机械加工余量与公差台阶轴类

Standard category:National Standard (GB)

state:Abolished

Date of Release1995-01-02

Date of Implementation:1996-08-01

Date of Expiration:2008-08-01

standard classification number

Standard ICS number:25.010

Standard Classification Number:Machinery>>Processing Technology>>J32 Forging

associated standards

alternative situation:Replaced JB 4289-1981; replaced by GB/T 21471-2008

Procurement status:,

Publication information

publishing house:China Standards Press

other information

Release date:1995-12-14

Review date:2004-10-14

Drafting unit:Shanghai Mechanical and Electrical Industry Administration

Focal point unit:National Forging Standardization Technical Committee

Publishing department:China Machinery Industry Federation

competent authority:China Machinery Industry Federation

Skip to download

Introduction to standards:

This standard specifies the machining allowances and tolerances of circular cross-section step shaft free forgings. This standard applies to step shafts with a ratio of the total length L to the maximum step diameter D (L/D) greater than 2.5. GB/T 15826.7-1995 Machining allowances and tolerances for hammer steel free forgings Step shafts GB/T15826.7-1995 Standard download decompression password: www.bzxz.net