HG 3552-1990 A106 Ammonia Synthesis Catalyst HG3552-1990 Standard Download Decompression Password: www.bzxz.net

Industry Standard of the People's Republic of China
A106 Ammonia
s catalyst
synthesis
Subject content and scope of application
ZB G 75012-90
Adjusted to: HG 3tr2-Pe
This standard specifies the technical indicators, inspection methods, inspection rules and requirements for packaging, marking, transportation and storage of A106 nitrogen synthesis catalyst.
This standard applies to A106 catalyst used for the reaction of hydrogen and nitrogen to produce hydrogen in ammonia synthesis equipment. 2 Reference Standards
GB5205wwW.bzxz.Net
GB 6678
Packaging, Storage and Transportation Pictorial Marking
Product Classification and Naming of Fertilizer Catalysts
General Rules for Sampling of Chemical Products
ZBG74002
Test Methods for Ammonia Synthesis Catalysts
Technical Requirements
Main Physical Properties and Chemical Components of the ProductsThe main physical properties and chemical components of the products are listed in Table 1 and Table 2, respectively. Table 1Main Physical Properties of Type A106 Ammonia Synthesis CatalystAppearance
Particle Size\
Bulk Density
(kg/L)
Irregular solid particles with black metallic luster and magnetic properties1.53.0
Promulgated by the Ministry of Chemical Industry of the People's Republic of China on March 15, 19903.3～4.7
Implemented on January 1, 1991
Z3 G 73012-90
Chemical composition of 2A106 type hydrogen synthesis catalystTotal iron (Fe)%
Iron ratio (Fet/e3t)
Carbon dioxide (AlQ)%
Potassium oxide (K20)%
Calcium oxide (C,O)%
Silicon dioxide (Sio)%
Sulfur (S)%
Phosphorus (P)%
Note: Particle size is a guaranteed indicator, and other particle size products can be produced according to user requirements. 3.2·Technical standard
0.55 ~-0.65
Under the inspection method and inspection conditions specified in this standard, the product quality of A106 type ammonia synthesis catalyst is expressed in terms of the volume percentage of ammonia at the outlet of the active reactor). Must meet the technical indicators in Table 3. Table 3
Indicator name
(Volume percentage of export ammonia including inspection)%
Test method
Technical indicator
Before heat treatment
After heat resistance
The activity, main physical properties and chemical composition of A106 ammonia synthesis catalyst shall be tested in accordance with ZBG74002.
5 Inspection regulations
ZBG75012--90
5.1 The quality of the product shall be inspected by the quality inspection department of the manufacturer. Products shall not be allowed to leave the factory without inspection. Each batch of products leaving the factory shall be accompanied by a product certificate. Products are inspected in batches, and the representative number of each batch shall not exceed 50 tons. 3.2 The samples of products shall be randomly sampled by the personnel of the quality inspection department. The number of sampling units shall be three times the cube root of the total number of units in the product packaging barrels, that is, 3×VN (V is the total number). If there is a decimal, it shall be rounded up to an integer. The number of sampling units shall not exceed 10 barrels. Take out samples with a total amount of about 3 tons evenly from the opened barrels. After being fully mixed, they shall be divided into samples by reduction method for inspection and reserved samples. The above samples shall be placed in sample bottles, sealed, labeled, and marked with product name, model, batch number, representative plate, sampling date, sampler, etc. The reserved samples shall be retained for one year for registration and verification. 5.3 If the product inspection result is unqualified, the inspection equipment, instruments, meters, chemical reagents, etc. shall be checked and calibrated, and then re-inspected. If the inspection result is still unqualified, it is allowed to re-sample and inspect according to Article 5.2 of this standard. If it is unqualified again, the batch of products shall be judged as unqualified.
5.4 If there is a dispute between the supply and demand parties on the product quality, the demander has the right to re-inspect according to the inspection method specified in this standard. If necessary, please ask the relevant units to be responsible for arbitration.
6 Marking, packaging, transportation and storage
614106 type ammonia synthesis catalyst products should be packed in gas iron drums. Pay attention to the packaging and attach the product quality certificate. The content of the certificate should include: product name, model, standard number, batch number, particle size, net weight, production name, etc.
6? The packaging should be black and have obvious marks. The content includes: production name, product name, type, batch number, particle size, net quantity (k2, trademark and clearly indicate the drawings of Figure 6 and Figure 8 in G-191 3. The packaged second-grade products should be stored in a dry warehouse to prevent pollution and moisture. 64. It is strictly forbidden to drop, roll or bump during transportation and loading and unloading. Rain protection should be provided during transportation. Additional remarks:
This standard was proposed by the fertilizer catalyst standardization technical unit of the Ministry of Chemical Industry. This standard was drafted by the Research Institute of Nanjing Chemical Industry Company. The main drafters of this standard are Yun Xiu, Liu Lihui and Wang Nanzhong
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.