Some standard content:
ICS 55. 120
Packing Industry Standard of the People's Republic of China
BB/T0044--2007
Packing containers
Plastic bottle for packing of pesticides
Packing containers - Plastic bottle for packing of pesticides2007-03-06Promulgated
Implementation on 2007-09-01
Promulgated by the National Development and Reform Commission
Announcement of the National Development and Reform Commission of the People's Republic of China
No. 16 of 2007
The National Development and Reform Commission approved 207 industry standards including Passenger Car Categories and Codes (see the Attachment for the standard numbers, names and start date of implementation), including 7 automotive industry standards, 177 machinery industry standards, 9 packaging industry standards, 7 ferrous metallurgy industry standards and 7 pharmaceutical equipment industry standards, which are now announced.
The above automotive, packaging, and pharmaceutical equipment industry standards are published by China Planning Press, the machinery industry standards are published by Machinery Industry Press, and the ferrous metallurgy industry standards are published by Metallurgical Industry Press.
Appendix: Numbers, names and implementation dates of 9 packaging industry standards National Development and Reform Commission of the People's Republic of China March 6, 2007
Appendix:
Standard number
Numbers, names and implementation dates of 9 packaging industry standards Standard name
BB/T 0040---2007
BB/T 0041—2007
BB/T 0042-
BB/T 00432007
BB/T 0044-
BB/T 0045—2007
BB 0046—2007
BB/T 0047-
BB/T 0048-
Assembled plywood boxes
General rules for multi-layer co-extruded barrier films for packaging
Aluminum pesticide bottles for packaging containers
Plastic logistics turnover boxes
Plastic pesticide bottles for packaging containers
Molded pulp products
Industrial product packaging
Aerosol ribbons
Aerosol paint
Combined anti-counterfeiting bottle caps
Effective date
2007-09-01
2007-09-01
2007-09-01
20 07-09-01
2007-09-01
2007-09-01
2007-09-01
2007-09-01
2007-09-01
1 Scope·
2. Normative references
3 Product classification
Requirements·
5 Test methods
Inspection rules·
Marking, packaging, transportation and storage
BB/T 0044—2007
BB/T 0044—2007
This standard is proposed by the China Packaging Federation. Foreword
This standard is under the jurisdiction of the National Technical Committee for Packaging Standardization. The responsible drafting units of this standard are: National Packaging Product Quality Supervision and Inspection Center (Guangzhou), Dongxing Plastic Can Co., Ltd. The participating drafting units of this standard are: National Packaging Product Quality Supervision and Inspection Center (Tianjin), Keda Fine Chemical Co., Ltd., Dongguan Redfeng Biotechnology Co., Ltd.
The main drafters of this standard are: Lu Ming, Zhu Liping, Luo Yizi, Han Xueshan, Situ Zhenchao, Xiao Ling, Xi Yixiong, Liu Bo, Jiang Xiangyang. 1 Scope
Packaging containers
Plastic pesticide bottles
BB/T 0044—2007
This standard specifies the definition, product classification, requirements, test methods, inspection rules and marking, packaging, transportation and storage of plastic pesticide bottles (hereinafter referred to as pesticide bottles).
This standard is applicable to pesticide bottles with a capacity not exceeding 1L (1kg) made of polyethylene (PE) and polyethylene terephthalate (PET) as the main raw materials and pesticide bottles made of polyamide, ethylene-vinyl alcohol copolymer or polyethylene fluorination. 2 Normative references
The clauses in the following documents become the clauses of this standard through the reference of this standard. For all the referenced documents with a punctuation date, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties who reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all the referenced documents without a punctuation date, the latest version shall apply to this standard. GB/T191 Pictorial symbols for packaging storage and transportation
GB/T2828.1 Attribute sampling inspection procedures Part 1: Sampling plan for batch inspection based on acceptance quality limit (AQL) GB/T2829 Attribute sampling procedures and tables for periodic inspection (suitable for inspection of process stability) GB/T2918 Standard environment for state adjustment and testing of plastic specimens GB3796 General rules for pesticide packaging
GB/T13508 Polyethylene blow molding barrels
GB/T17344 Packaging Packaging container airtightness test method QB/T1868 Polyethylene glycol (PET) carbonated beverage bottles 3 Product classification
3.1 Pesticide bottles according to (B 3796 stipulates that it is divided into two levels. "Level 1 belongs to dangerous goods packaging bottles, which are divided into one category: Level 1 belongs to non-dangerous goods packaging bottles.
3.2 Pesticide bottles are divided into extrusion blow bottles, injection blow bottles (injection stretch blow bottles), and injection molded bottles according to the molding method. 4 Requirements
4.1 Appearance
4.1.1 Bottle.
The bottle mouth plane and thread are flat and smooth, without chipping or flashing, and the bottle door, bottle cap and seal are well matched. 4.1.2 Bottle body.
Good plasticization, especially bubbles, no black impurities larger than 0.5mm in length, uniform color, no wrinkles, full molding, no obvious shrinkage or deformation, and the bottle is clean.
4.2 Dimension deviation
BB/T 00442007
Bottle mouth size deviation.
Bottle mouth size deviation shall comply with the provisions of Table 1, part
Bottle mouth inner diameter
Bottle mouth outer diameter
Height deviation,
Table 1 Bottle mouth size deviation
Allowable deviation, mm
Injection bottle
The height deviation of pesticide bottle shall be in accordance with the provisions of Table 2 Table 2 Height deviation
Height, mm
4.2.3 Verticality deviation:
Extrusion blow bottle, injection blow bottle (injection stretch bottle)
Allowable deviation, mm
The verticality deviation of pesticide bottle center line to bottle bottom plane shall be in accordance with the provisions of Table 3. Table 3 Verticality deviation
≤150
4.3 Full mouth capacity
The full mouth capacity of pesticide bottle shall not be less than 105% of the nominal capacity4.4 Maximum Minimum wall thickness and symmetrical wall thickness ratio
The minimum wall thickness and symmetrical wall thickness ratio of pesticide bottles shall comply with the provisions of Table 4. Table 4 Minimum wall thickness and symmetrical wall thickness ratio
Molding method
Extrusion blow bottle
Injection blow bottle (Yangpu blow bottle)
Injection molded bottle
4.5 Quality deviation
Minimum wall thickness, mm
The quality deviation of a single bottle of pesticide bottles shall comply with the provisions of Table 5. 2
Allowable deviation, mm
Symmetrical wall thickness ratio
4.6 Physical and mechanical properties
Mass, g
10 ~25
Table 5 Quality deviation
The physical and mechanical properties of pesticide bottles shall comply with the provisions of Table 6. Table 6 Physical and mechanical properties
Axial bearing pressure
Airtightness
Resistant to internal pressure
Drop performance
Leakage (large weight of hot storage)
30 kPa
250kPa
20 kPa
100kPa
20 kPa
100 kPa
54℃, 14d
Note: Leakage amount is only tested for plastic bottles containing liquid pesticides4.7 Loading performance
20 kPa
Allowable deviation, %
BB/T 0044—2007
Indicator requirements
No leakage
No damage, no leakage
No damage, no leakage
Pesticide bottles" should be tested for durability before being filled with pesticides for the first time. They can only be used when the contents and the pesticide bottles are free of corrosion and other physical and chemical changes.
Test method
5.1 Appearance inspection
Visual inspection should be carried out under natural light or at a distance of 0.6m from a 40W fluorescent lamp. 5.2. Measurement of bottle 1 and height deviation
Measure and calculate with a measuring instrument with an accuracy of 0.02mm. 5.3. Measurement of verticality deviation
Measure according to the provisions of 6.4 in QB/T1868-2004. 5.4. Measurement of full capacity
Use clean water as the test liquid, and pour it into the sample bottle until the mouth is level, then pour the water in the bottle into the measuring cup. The reading measured is the full capacity value of the pesticide bottle (or the capacity value is obtained by weighing and then converting it into volume). 5.5. Measurement of minimum wall thickness and symmetrical part wall ratio shall be measured according to the provisions of 5.6 in GB/T13508-1992. 5.6. Measurement of mass deviation
BB/T 0044-2007
Measure and calculate with a balance with a sensitivity of 0.01g. 5.7. Physical and mechanical properties
5.7.1 Axial bearing pressure.
The sample bottle is an empty bottle without a cap. After being placed in a 40°C environment for 168 hours, it is adjusted according to the standard environment and normal deviation range specified in GB/T2918-1998. The sample bottle state adjustment time should be no less than 4 hours. The sample bottle is placed vertically on the pressure testing machine, and pressure is applied to the sample bottle vertically at a constant speed of 10mm/min. The first maximum load of each sample bottle is recorded. 5.7.2 Airtight performance.
Test according to the provisions of GB/T17344-1998. 5.7.3 Internal pressure resistance.
After the sample bottle is filled with water, it is pressurized to the specified value under the condition of protective devices, maintained for 30 minutes, and the sample bottle is observed. 5.7.4 Drop performance.
Inject the nominal volume of water containing anticoagulant into the sample bottle and pre-treat it at -18°C for 24l1. Then drop the sample bottle according to the height specified in 6, and hit the cement ground with the weakest part. Each sample bottle is dropped for 5 times in succession, and the sample bottle is observed. 5.7.5 Leakage (thermal storage weight loss)
In the sample bottle with the mass of the empty bottle N. Fill the sample bottle with the actual product of nominal capacity, expand the bottle cap, measure its mass N, place it in the environment of 54℃±2% for 14 days, and then measure its mass Nz again. The leakage is: N-N2
2×100%
5.7.6 Endurance performance.
Fill the sample bottle with the actual product of nominal capacity, place it in the environment of 54℃±2C for 14 days, and then check the sample bottle. 6 Inspection rules
6.1 One batch is a batch, or the inspection batch by the manufacturer is a batch; one pesticide bottle is a unit: 6.2 Product inspection is divided into factory inspection and type inspection. Product delivery must be inspected. The factory inspection items are 4.14.2; the type inspection items are all the contents of Chapter 5. 6.3 Type inspection should be carried out in the following cases: a) new products or old products are transferred to the factory for trial production and identification; b) when the structure, material, process changes may affect the product performance; c) in normal production, it should be carried out every six months; d) when the production is stopped for more than six months! , when production is resumed;
When the inspection results are significantly different from those of the last type inspection; e)
\) When the national quality and technical supervision agency proposes a type inspection requirement: 6.4 Sample plan and judgment rules
6.4.1 Factory inspection is carried out in accordance with the normal inspection secondary sampling plan of CB/T2828.1. The inspection level is the special inspection level (IL) S-3, the acceptance quality limit (AQI) is 2.5, and the number of samples and the judgment array are shown in Table 7. 6.4.2 Type inspection is carried out in accordance with the provisions of GB/T2829, using a single sampling plan with discrimination level I, see Table 8: 4
Batch range
3200 or less
3201 -35000
35001 ~ 500000
500001 and above
Table 7 Number of samples and decision array
Number of samples n
n,=n =8
n,=n=13
n, = ng = 20
BB/T 00442007
Judgment array［AIA2,R,R,］
.0,1,2,2]
.0,1,2,2]
[0,3,3,4]
[1,4,3,5.
Table 8 Type inspection non-conforming quality level (RQL) and judgment rules Inspection items
Specification deviation
Axial bearing pressure
Airtight performance
Resistant to internal length force
Drop performance
Leakage (Geno weight loss)
Resistant to installation
Marking, packaging, transportation and storage
7.1 Marking
Non-conforming quality level (RQL)
Size of sample
Judgment array
[Ac, Re'
The surface of the package should have the product name, specifications, quantity, size of the packaging box, gross weight, manufacturer, production date, and be marked with "handle with care" and "keep away from moisture" and other packaging storage and transportation signs. The signs should comply with the regulations in (B191. 7.2 Packaging
The pesticide bottles are packaged on pallets or according to the requirements of the user: 7.3 Transportation
During transportation, they should be loaded and unloaded gently. Throwing is strictly prohibited to prevent collision, rain and pollution. 7.4 Storage
The product should be stored in a dry and clean place, avoid direct sunlight, and heavy pressure is strictly prohibited. S/N:1580058.922
1580051892203
Packaging Industry Standard of the People's Republic of China
Packaging Container
Plastic Pesticide Bottle
BB/T 0044—2006
China Planning Publishing House, Shandong Publishing House
(Address: 4th Floor, Guohong Building, No. 11, Mukedi Beilijia, Xicheng District, Beijing) (Postal Code: 100038 Tel: 6390643363906381) Published by Beijing Publishing House of Xinhua Bookstore
Printed by Sanhe Fuhua Printing and Packaging Co., Ltd.
880×1230 mm1/160.75 Printing sheet14,000 wordsFirst edition in July 2007First printing in July 2007Number of copies: 1—500
Unified book number: 1580058-922
Price: 10.00 yuan
Copyright reserved
Infringements must be investigated2 Product inspection is divided into factory inspection and type inspection. The product must be inspected when it is delivered. The factory inspection items are 4.14.2; the type inspection items are all the contents of Chapter 5. 6.3 Type inspection should be carried out in the following cases: a) Trial design and identification of new products or old products transferred to the factory for production; b) When the structure, material, process changes may affect the product performance; c) It should be carried out every six months during normal production; d) When the production is stopped for more than six months! , when production is resumed;
When the inspection results are significantly different from those of the last type inspection; e)
\) When the national quality and technical supervision agency proposes a type inspection requirement: 6.4 Sample plan and judgment rules
6.4.1 Factory inspection is carried out in accordance with the normal inspection secondary sampling plan of CB/T2828.1. The inspection level is the special inspection level (IL) S-3, the acceptance quality limit (AQI) is 2.5, and the number of samples and the judgment array are shown in Table 7. 6.4.2 Type inspection is carried out in accordance with the provisions of GB/T2829, using a single sampling plan with discrimination level I, see Table 8: 4
Batch range
3200 or less
3201 -35000
35001 ~ 500000
500001 and above
Table 7 Number of samples and decision array
Number of samples n
n,=n =8
n,=n=13
n, = ng = 20
BB/T 00442007
Judgment array［AIA2,R,R,］
.0,1,2,2]
.0,1,2,2]
[0,3,3,4]
[1,4,3,5.
Table 8 Type inspection non-conforming quality level (RQL) and judgment rules Inspection items
Specification deviation
Axial bearing pressure
Airtight performance
Resistant to internal length force
Drop performance
Leakage (Geno weight loss)
Resistant to installation
Marking, packaging, transportation and storage
7.1 Marking
Non-conforming quality level (RQL)
Size of sample
Judgment array
[Ac, Re'
The surface of the package should have the product name, specifications, quantity, size of the packaging box, gross weight, manufacturer, production date, and be marked with "handle with care" and "keep away from moisture" and other packaging storage and transportation signs. The signs should comply with the regulations in (B191. 7.2 Packaging
The pesticide bottles are packaged on pallets or according to the requirements of the user: 7.3 Transportation
During transportation, they should be loaded and unloaded gently. Throwing is strictly prohibited to prevent collision, rain and pollution. 7.4 Storage
The product should be stored in a dry and clean place, avoid direct sunlight, and heavy pressure is strictly prohibited. S/N:1580058.922
1580051892203
Packaging Industry Standard of the People's Republic of China
Packaging Container
Plastic Pesticide Bottle
BB/T 0044—2006
China Planning Publishing House, Shandong Publishing House
(Address: 4th Floor, Guohong Building, No. 11, Mukedi Beilijia, Xicheng District, Beijing) (Postal Code: 100038 Tel: 6390643363906381) Published by Beijing Publishing House of Xinhua Bookstore
Printed by Sanhe Fuhua Printing and Packaging Co., Ltd.
880×1230 mm1/160.75 Printing sheet14,000 wordsFirst edition in July 2007First printing in July 2007Number of copies: 1—500
Unified book number: 1580058-922
Price: 10.00 yuan
Copyright reserved
Infringements must be investigated2 Product inspection is divided into factory inspection and type inspection. The product must be inspected when it is delivered. The factory inspection items are 4.14.2; the type inspection items are all the contents of Chapter 5. 6.3 Type inspection should be carried out in the following cases: a) Trial design and identification of new products or old products transferred to the factory for production; b) When the structure, material, process changes may affect the product performance; c) It should be carried out every six months during normal production; d) When the production is stopped for more than six months! , when production is resumed;
When the inspection results are significantly different from those of the last type inspection; e)
\) When the national quality and technical supervision agency proposes a type inspection requirement: 6.4 Sample plan and judgment rules
6.4.1 Factory inspection is carried out in accordance with the normal inspection secondary sampling plan of CB/T2828.1. The inspection level is the special inspection level (IL) S-3, the acceptance quality limit (AQI) is 2.5, and the number of samples and the judgment array are shown in Table 7. 6.4.2 Type inspection is carried out in accordance with the provisions of GB/T2829, using a single sampling plan with discrimination level I, see Table 8: 4
Batch range
3200 or less
3201 -35000
35001 ~ 500000
500001 and above
Table 7 Number of samples and decision array
Number of samples n
n,=n =8
n,=n=13
n, = ng = 20
BB/T 00442007
Judgment array［AIA2,R,R,］
.0,1,2,2]
.0,1,2,2]
[0,3,3,4]
[1,4,3,5.
Table 8 Type inspection non-conforming quality level (RQL) and judgment rules Inspection items
Specification deviation
Axial bearing pressure
Airtight performance
Resistant to internal length force
Drop performance
Leakage (Geno weight loss)
Resistant to installationbZxz.net
Marking, packaging, transportation and storage
7.1 Marking
Non-conforming quality level (RQL)
Size of sample
Judgment array
[Ac, Re'
The surface of the package should have the product name, specifications, quantity, size of the packaging box, gross weight, manufacturer, production date, and be marked with "handle with care" and "keep away from moisture" and other packaging storage and transportation signs. The signs should comply with the regulations in (B191. 7.2 Packaging
The pesticide bottles are packaged on pallets or according to the requirements of the user: 7.3 Transportation
During transportation, they should be loaded and unloaded gently. Throwing is strictly prohibited to prevent collision, rain and pollution. 7.4 Storage
The product should be stored in a dry and clean place, avoid direct sunlight, and heavy pressure is strictly prohibited. S/N:1580058.922
1580051892203
Packaging Industry Standard of the People's Republic of China
Packaging Container
Plastic Pesticide Bottle
BB/T 0044—2006
China Planning Publishing House, Shandong Publishing House
(Address: 4th Floor, Guohong Building, No. 11, Mukedi Beilijia, Xicheng District, Beijing) (Postal Code: 100038 Tel: 6390643363906381) Published by Beijing Publishing House of Xinhua Bookstore
Printed by Sanhe Fuhua Printing and Packaging Co., Ltd.
880×1230 mm1/160.75 Printing sheet14,000 wordsFirst edition in July 2007First printing in July 2007Number of copies: 1—500
Unified book number: 1580058-922
Price: 10.00 yuan
Copyright reserved
Infringements must be investigated
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.