JB/T 3411.24-1999 Dimensions of washers for keyway broaching
Basic Information
Standard ID:
JB/T 3411.24-1999
Standard Name: Dimensions of washers for keyway broaching
Chinese Name:
键槽拉削用垫片 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Metal Cutting Machine Tools>>J52 Machine Tool Accessories and Accessories
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Publishing department:Mechanical Science Research Institute
Introduction to standards:
JB/T 3411.24-1999 This standard is a revision of JB 3434-83 "Dimensions of Shims for Keyway Broaching". Only the following points were modified during the revision, and the main technical content remained unchanged. ——Writing format; ——Standard plus English name; ——Related reference standards and related content; ——Thread drawing method. This standard specifies the type and size of shims for keyway broaching. JB/T 3411.24-1999 Dimensions of Shims for Keyway Broaching JB/T3411.24-1999 Standard download decompression password: www.bzxz.net
Some standard content:
ICS25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T3411.24-—1999
Washer for keyway broaching Dimensions1999-05-20 Issued
National Machinery Industry Bureau
2000-01-01 Implementation
Machinery Industry Standard of the People's Republic of China
Washer for keyway broaching DimensionsThis standard specifies the type and size of washers for keyway broaching. Type and size
The type and size are as specified in the following figure and table. Approved by the State Bureau of Machinery Industry on May 20, 1999 15
JB/T3411.24-1999
Replaced JB343483
Implemented on January 1, 2000
Basic dimensions
Limit deviation
JB/T3411.24—1999
Basic dimensions
Limit deviation
Basic dimensions
Limit deviation
JB/T3411.24—1999
Table (continued)
Basic dimensions
Limit deviation
Basic dimensions
Limit deviation
JB/T3411.24—1999www.bzxz.net
11.24—1999
Table (continued)
Basic dimensions
Limit deviation
Basic dimensions
Limit deviation
1) Shims matching keyway broaches
3 Marking
Marking example:
JB/T3411.24-1999
Table (end)
Basic dimensions
Shims for keyway broaching with B=2mm, B-13.5mm: Shims 2×13.5
5JB/T3411.24-199
Limit deviation
Mechanical industry standards
Shims for keyway broaching
JB/T 3411.24-1999
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
Format 880×1230
X number of characters xXX,XXX
Print sheets X/X
Xth printing in XX month of 19XX
Xth edition in XX month of 19XX
Number of prints 1-XXX
Price XXXX Yuan
XX-XXX
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.