This standard specifies the code for glass fiber products. This standard applies to glass fiber yarn, cloth, tape, sleeve and felt products. GB/T 4202-2001 Glass fiber product code GB/T4202-2001 Standard download decompression password: www.bzxz.net

IC5 59. 100. 10
National Standard of the People's Republic of China
GB/T 4202..2001
Glass fiber product code
Designation forglass fibres
2001-05-11Release
People's Republic of China
General Administration of Quality Supervision, Inspection and Quarantine
2001-12-01Implementation
GB.T4202-21
HKAONiKAa
Hand-marked center line code, equivalent! [2?9: 1993 China Glass New Education Line Code Cup Standard: Based on this, 30?9R1 strand glass fiber yarn code / 1404.184 full fiber, belt, parts code and car people's common silicon material industry standard 1: 6-1 pool 4 ring glass fiber dyeing lock products code > were revised and merged. The main changes are: because of the standard combination, the name of this standard was re-determined: added the same single multi-transportation and excavation of the sand Xi joint production to brush the fiber code: one-filled According to [S02573: 1993, the original final capital is not indicated, only the main line is listed; the original silk is cut according to 3 in the nominal length number after the length unit number; the nominal single-sided secret quality of the non-standard machine yarn is changed in the chemical special item, replacing the whole item: the wall-mounted code is actually listed in the nominal unit and the machine pressure quantity, the color of the pattern is required or the manufacturer's mark is the mountain enterprise-the thickness of the non-dimensional belt is changed to [CC 1n0 is used to make it unified with other codes: the plastic product code is used, and the product type is listed in the cloth code according to the type of product, and the foreign code is added: the code for plastic glass and printed circuit board is added: ... It is allowed to inquire about the code for additional matters, so as to meet the requirements of the two difficult services of this standard.
From the date of implementation of this standard G3/4202--:981, GB4204:198- and J C6: 195- This standard is jointly issued by the Beijing Construction Materials Industry Government and the National Standard Technical Committee. The main drafters are Wang Yuhai, Chen Shang, Gao Xu, and Shi Dian1 Yingpu. This standard is applicable to glass fiber products such as cloth, tape, tube, and natural gas. 2 Cited standards
GB/T4202—2001
/126210
H12:-8
The following standards contain provisions that are cited and constitute the recommended texts of this standard. When this standard is published, the versions shown are valid. All applicable standards will be revised. Parties using this standard are urged to explore the possibility of using the latest version of the standard enclosed below. CB/1X74-2031
Additional material terms and definitions
3 Definitions
This standard uses the definitions in GH/1374.
4 Yarn codes
4.1 Codes shall include the technical specifications 4.1.1 Glass type
The technical specification shall include the type of glass used (see Table 1). The types in Table 1 shall be either English or Chinese.
4.1.2 Yarn type
The type of yarn shall be indicated by English letters.
General Purpose·Good Electrical Insulation·|tt||Chemical Resistance·|tt||High Content of Chemicals·|tt||Good Electrical Properties·|tt||High Combustion Resistance·|tt||High Hysteresis Resistance·|tt||Good Insulation Properties and Chemical Resistance·|tt||General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China 2001-05-11 Standard 2001-12-1 Implementation Guidelines 2001-12-1…D Indicates the grade of fiber,
4.1.3 Fiber Diameter
GI/T 4202
A one or two digit number shall be the nominal diameter, expressed in microns. 4.1.4 The number of lines to be changed, the number of wins, the time and the parts to be replaced are as follows: ) I send the length, in units of x!
h) The number of strands to be studied;
The number of strands to be combined:
Time;
Change, expressed in the time of digging for years.
4.1.5 Supplementary and manufacturer's mark
THTKANKAa
When necessary, the manufacturer's mark can include the supplementary fee and the manufacturer's mark. The supplementary manufacturer's mark should be in the specified store, not allowed to calculate the service step, and the manufacturer's mark should be added after the quantity and the measurement data number. 4.2 Various fiber yarn codes
.2.1~4.3.8 The elements that must be included in the various fiberglass code are shown. 4.2.1 Raw yarn (new type) [) indicates the letter (;) indicating the nominal diameter of the fiber in m, followed by a ""), and the natural density in tex, 4.2.2 Fixed-length yarn (b) indicates the specific diameter of the fixed-length fiber in m, followed by a connecting number (x), for example D7-190 4.2.3 Single-stranded yarn (new type) 4.2.31 Continuous fiber (used for making ball Type
b) Letters indicating the warp length of the continuous fiber (
) Nominal diameter of the warp, in m, followed by a connecting symbol \.\, d) Wire length of the original yarn, in rx, followed by a multiplication sign: ) Decomposition of the original yarn!
E) Special direction:
Name) Wire length, expressed in units per meter, such as: 9-33×[240
4.2.3.2 Single-strand fixed-length fiber
) Type of glass used
b) Letters indicating the length of the fixed-length fiber 1);
) Nominal diameter of the fiber, in m, followed by a connecting symbol "-dF Linear density, in tex:
t: Density, in tex per unit:
E7902-160
4.2.3.3 Textured yarn
) Glass type
GB4202-2001
h Letter indicating the type of yarn before texture (or D see 1.1.2) c! Fiber nominal diameter, in tex, followed by a connecting symbol "" 2) Linear density before texture, in tex, followed by a letter; Linear density after texture, in 18k.
Steel such as FC9-33034?
4-2.4 Yarn
42.4.1 The code for continuous or fixed length single yarns of the same material as described in 4.2.3.1 or 4.2.3.2 shall not be marked with the following:
) Continuous or fixed length single yarns, number of strands, (l) and can be expressed as:
) Technical total, expressed in terms of the number of strands per strand, e.g. 33125150
4.2.4.2 Yarns of different material composition
3) The code for the material used shall be as described in 42.3, linked by the station number "+", with the whole part in brackets: b ) Open according to direction:
\) and grab the degree, expressed in the number of times each comes, create EC9..3311501EC722X12159)S1C1.2.5 warm line
=) single yarn code. According to 4.2.3 table, omit the brackets and degree, c) the number of cuts reported is followed by the number (for each stage of the interval! d) the number of roots written (for the sub-section
E) degree, expressed in the number of times.
EC--3312380
4.2.6 Multi-strand yarn
4.2.6.1 The code of the yarn used in the multi-strand skein made of the same single yarn,
b) the number of single yarns skeined together.
1.2.6.2 The code of the yarn used in the multi-strand skein made of the same single yarn,
b) the number of single yarns skeined together.
1.2.6.2 The code of the yarn used in the multi-strand skein made of different single yarns, which are connected with each other by the code "+", and the whole code is included in the code. EC931×124107-22X120)
1.2.7. No fever diagnosis
: ) Type of glass fiber
b) Letter indicating continuous red dream C:
Nominal diameter of warp, in m, followed by "3
d) Total velvet is used in tex as a single section;
) Indicates the use of enhanced lubricant
CB/14202—2001
…W represents the process of combining elastic cable, weaving, drawing and other processes, representing spraying, pre-molding, continuous pressing, centrifugal casting, etc., granular material, lock plastic and other processes. For example, EC112400W
4.2. Japanese raw material
1) Code of raw yarn (see 4.2.1!. Followed by \..\: 1) Short-cut raw material final length, in mr, followed by mmC14m
5 Cloth code | 5.1 Elements of the code The code includes the following technical symbols. 5.1.1 Use letters to indicate the type of glass. 5.1.2 Use reverse letters or letter combinations to indicate the type of fabric. W indicates woven fabric. WR indicates roving fabric. WD indicates fixed-length fiber fabric. WT indicates deformable fabric. W (GX) indicates glass fiber and roving mixed fabric. W (XD) indicates glass fiber and vinegar fiber mixed fabric. L indicates latex. WP indicates polyester fabric. WPL indicates branded solid fabric. W indicates non-pasted fabric. WPC indicates printed board fabric. Indicates cloth,
·NP indicates plastic mesh;
indicates geogrid;
indicates geogrid for road surface, TTTKAoNKAa
5.1.3 Use a value to indicate the thickness of the cloth, expressed as the value of nominal thickness (mm) multiplied by 1000, and another value to indicate the nominal single surface area of ​​the cloth, in units of /m.
For two cloths, such as polyester mesh, geogrid, etc., do not use thickness or unit area quality as a code, but use the number of weft density to indicate the structure of the cloth, and the warp and weft densities are connected by a code. 5.1.4 Use a value to indicate the thickness of the cloth The perimeter of the fabric is in meters. 5.1.5 Manufacturer's mark
Same as 4.1.5,
5.2 Standard numbers of various types of glass fiber
5.2.1 Whole continuous red fiber fabric, cut-to-length fabric, fixed-length fiber fabric, textured gauze, composite fabric, latex fabric, emulsion fabric, weakened cavity fabric and printed circuit board fabric.
a) Type of fabric:
h) Indicator letter A, WWB, etc. (see 5.1.8): SR/T 4202 - 2001
's progress, you can choose the beautiful mother A to express it, or the treatment of silk combination: to distinguish the progress of the dream weaving, different specifications are squeezed with about, followed by a continuous jump sign "一" l) the completion of the cloth is expressed by n,
such as EW100A50
5.2.2 Ge Miaobuli stick cloth
2) The new test bag category is not the rule! ：
Customer indicated letter WR or WW:
（）The public secret unit of fabric group quality, in m. You can choose the quality letter A afterwards, the core.. must be combined with the common letter. To distinguish different fabric groups, different goose consecutive number "d) The rate of fabric, cm is the middle
EWR5JO
5.2.3 Net and polyester net, upper and lower processing and Xie Gulu use Junduan maintenance worker Erqiao 1) All types of dirtiness:
b) Indicated workshop:
(）Warp (in m as a unit) with a value of 2.5, followed by a multiplication sign: d) Density in r as a unit to be 2.5, followed by the reverse e) The history of the fabric, as a single,
7412100
refers to the following special codes including the following requirements 6.1.1 Use English letters to indicate the type of tape: 4.1.1.6.1.2 Use English letters to indicate the type of tape:
-D indicates a woven tape with glass yarn and braided yarn (× indicates a woven tape with glass fiber yarn and polyurethane). TU indicates a weft tape.
6.1.3 Use the number of tapes to indicate the accuracy of the tape, expressed in nominal dimensions (mm) or 1000. 6.1.4 Use a numerical value to indicate the width of the tape, expressed in m. 6.1.5 For non-weft tapes, use English letters to indicate the type of tape: LP indicates small composite tape:
EP indicates epoxy resin;
-PI indicates propylene glycol;
6.1.E Manufacturer's mark:
Example 4.1.5 .
6.2 Ratio of various types of glass fiber tapes
6.2-1 General continuous fiber tapes
? Type of glass used:
[1) The letter T is indicated,
c) The width of the tape is in m (m is indicated by: 0ou, followed by a connecting number \—\d),
6.2.2 Glass fiber red fiber interwoven mixed tape
GB/T4202
The writing order of each item in the standard is shown in 6.2, 1 (below). Creation: CTGXC20020
6.2.3 Glass fiber yarn and polyfiber interlacing paper, adhesive tape, example: C(GD)20
6.2.4 Non-weft adhesive tape
) The type of glass.
indicates the letter T of non-weft adhesive tape
) The thickness of the non-weft adhesive tape is expressed by the value of the thickness (mm) multiplied by 1500, followed by the symbol "-" (the length of the tape, in units of:
e) indicates the type of adhesive tape,
example: ETU170..-25EP
7 The code of the casing
7.1 Elements of the code
The code of the casing includes the following abbreviations and technical symbols: 7.1.1 English letters indicate the type of casing: ST. indicates the casing, 7.1.3 A numerical value is used to indicate the nominal inner diameter of the variable tube, with the unit as the unit. 7.1.4 Manufacturer's mark. Same as 4.1.5
7.2 Glass fiber ultra-thin casing
a) The type of the whole number used!
b) The letters SL
indicate the nominal inner diameter of the tube, in mm.
Example: FS[.B.5
8 Felt code
B-1 Code element
The code includes the abbreviated technical symbols of the following elements: B.1.1 Use English letters to indicate the glass used, 4.1.1.8.1.? Use English letters to indicate the type of felt: MC indicates chopped strands of cellulose fiber; MS indicates continuous strands of cellulose fiber. MK indicates glass fiber continuous sewed felt. MF indicates glass fiber surface felt; MN indicates glass fiber needle-spun felt.
B.1.3 Use numbers to indicate the mass per unit area of ​​the material, in units of /m.
B.1.4 Use letters or numbers to indicate the characteristics of the material, which are placed in brackets. B.1.5 Width expressed in whole words, in mtm, 6.1.6 Yijin Trademark Certificate, same as 4.1.5.
8.2 Various codes
8.2.1 Glass fiber chopped strand machine
TTTKAoN KAa
! b) indicates the length of the glass fiber in mm (MCCR/T 4202:2001). b) indicates the nominal unit of mass of the glass fiber. The unit is m. The unit of mass is m. The unit of mass is m. The unit of mass is m. The unit of mass is m. The unit of mass is m. The unit of mass is m. The unit of mass is m. The unit of mass is m. The unit of mass is m. The unit of mass is m. The unit of mass is m. The unit of mass is m. The unit of mass is m. The unit of mass is m. 1c1
!) In brackets, the type of binder is indicated by the letter "岳", ——H indicates the type of binder
—… (I) Table 6 Low-profile
e!, 6. 2. 1e).
Creation 4010
8.2.3 Fiber-woven felt
The type of glass used
indicates the glass fiber single-woven American cross-section MK; Same as 8.2.
Double-layer structure construction, the layers are parallel to each other in the number. Example! (030) indicates biaxial orthogonal
(+45, -45) indicates biaxial cross
(+43, -4) indicates triaxial oblique
) Size H, 2.1e), Example 1: K45G1500 (single sleeve bottle) Example 2, EMK5: CJ.90)-1600 two-layer orthogonal composite key each) 8.2.4 dial fiber treatment surface, acupuncture a1 glass type used; b) indicates the type of salt energy letter MF or MN, 8.2.1; Same as 8.2.1-). Example 1: AMF100900 table general specification 3: EMN6GG1040 (acupuncture station W (GXC) W (GXD) GD/T 4232—2001
《Classic English》
Chinese and English versions of the symbols
Installation AI glass type
General purpose, good also building medical properties
Chemical Society
Gold wind oxide high
In dielectric film
Good electrical insulation system without chemical resistance
Quality fluorescent text
-TT KANn KA
Jor grneral p:upases-guod e.ectrizl prupertieschmical rusistance
: high alkali onseat
Lagh dielectis preperies
Iigh ruccl.anica: strength
Iigli elastie Inodalus
slngthe 1eaje lumtbzxZ.net
gun. elellisl ptopurliex s ci.al lezigte table 2 dream species
even moon shrimp
no chase level, Ding Ding long fiber Huang
empty form, use the next deformation stroke
to the skin of the history
contin dous for zontinucus Eilamenrsdiscor.tinjous,for staple fiberTexired,for texiLred Yarns
Table A5 Types of fabrics
Non-woven gauze
Drawing cloth
Fixed length fiber
, deformed market
uniform fiber yarn and mixed with yarn, woven
made ​​of glass fiber mixed with mixed with yarn, low-end fiber yarn and cotton woven, strong webbing
glass fiber and mixed with yarn, webbing
latex market
plastic cloth
controlled market
attached and seat cloth
wovea l:b:ics
Corresponding true text
woreafabies.ovings
weven Eabries-bag
wcven Eabrdesdiscootinucus
woven Eabricl ;texlured
woven fobriciglns Xcpiton)
wcyen Erhrica(glas faheics.p:nstirn-c anedwaven Sahrics-Elunarrs an. jnrey znntedoraven fahrios.wll cnvnring
light knot belt
worker grid
shape period spray stand up
note pregnant original some felt
sauce surface felt
needle Jing area
Hao Ya aldehyde both
table A3 (light)
1pesarndrr:r mal
R-aprid
wavew nl.riesnaned -iterir i:rd stretch in individual swelling type
test should be beautiful article
:hag:prd arr.nd m'.1
snincus srand mar.swil r
:nrrh kbre,krined mn
:urinciag nat,ilamenr mnt
srrdkd net
resin type
Jiserur:ted lysl
pulyitndlrwll cnvnring
light knot belt
worker grid
shape period spray stand up
note pregnant original some felt
sauce surface felt
needle Jing area
hao aldehyde both
table A3 (light)
1pesarndrr:r mal
R-aprid
wavew nl.riesnaned -iterir i:rd张在個肿类
test response beautiful article
:hag:prd arr.nd m'.1
snincus srand mar.swil r
:nrrh kbre,krined mn
:urinciag nat,ilamenr mnt
srrdkd net
resin type
Jiserur:ted lysl
pulyitndlrwll cnvnring
light knot belt
worker grid
shape period spray stand up
note pregnant original some felt
sauce surface felt
needle Jing area
hao aldehyde both
table A3 (light)
1pesarndrr:r mal
R-aprid
wavew nl.riesnaned -iterir i:rd张在個肿类
test response beautiful article
:hag:prd arr.nd m'.1
snincus srand mar.swil r
:nrrh kbre,krined mn
:urinciag nat,ilamenr mnt
srrdkd net
resin type
Jiserur:ted lysl
pulyitndlr
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.