JB/T 9868.1-1999 This standard is a revision of ZB T54 003-88 "Bulk feed transport vehicle types and basic parameters". During the revision, only editorial changes were made according to relevant regulations, and the main technical content has not changed. This standard is part of the JB/T 9868 "Bulk feed transport vehicle" series of standards, which includes the following three parts: JB/T 9868.1-1999 Bulk feed transport vehicle types and basic parameters JB/T 9868.2-1999 Technical conditions for bulk feed transport vehicles JB/T 9868.3-1999 Test methods for bulk feed transport vehicles This standard specifies the types, load capacity and basic parameters of bulk feed transport vehicles. This standard applies to bulk feed transport vehicles modified from or equipped with standard truck chassis. It also applies to bulk feed transport vehicles towed by tractors. This standard was first issued on March 10, 1988. JB/T 9868.1-1999 Bulk feed transport vehicle types and parameters JB/T9868.1-1999 Standard download decompression password: www.bzxz.net

TCS65.00.10
Machinery Industry Standard of the People's Republic of China
JB/T9868.1-9868.3-1999
Bulk feed delivery trucks
Bulk feed delivery trucks
1999-08-06 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
JB/T9868.1-1999
This standard is a revision of 7.8T54003-88 "Bulk feed delivery truck models and parameters". Only editorial changes were made to the original standard during the revision, and the main technical content remained unchanged. This standard is part of the 9868 series of standards for bulk feed transport vehicles, which includes the following two parts: JR/T9868.1-1999 Bulk feed transport vehicle model and specifications JD/T9868.2-1999 Bulk feed transport vehicle technical specifications D/T9868.3-1999 Bulk feed transport vehicle test specifications This standard will replace ZBT54003-8 from the date of implementation. This standard was proposed and managed by Huhezhite Animal Husbandry Machinery Research Institute. The drafting units of this standard are: Huhezhite Animal Husbandry Machinery Research Institute, Dingning Agricultural and Animal Husbandry Machinery Research Institute. The main drafters of this standard are: Hai Yurong, Sheng Peiran, Gong Zhongliang. This standard was first issued on March 10, 1988. 1 Scope
Machinery Industry Standard of the People's Republic of China
Bulk feed delivery trucks
Types and numbers
Bulk feed delivery trucks-Trpes and paramelersThe standard specifies the types, load capacities and basic numbers of bulk feed delivery trucks. JBT 9868.1-1999
Replacement ZB '154 (K13—B8
Blank standard for bulk material transport vehicles modified from standard truck chassis. Also suitable for bulk material transport vehicles pulled by tractors
2 Referenced standards
The following are the provisions contained in the standard, which constitute the provisions of this standard through reference in this standard. At the time of publication of this standard, the versions shown are valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the latest version of the following standards. G 321—1980 Priority numbers and priority systems 3 Definitions
This standard adopts the following definitions,
3. 1 Bulk feed transport vehicle is equipped with sealing and conveying devices, and the materials are unloaded to a certain height and distance through the box conveying device (or can be automatically loaded and counted), and is a special vehicle used to transport bulk feed. 4 Types of bulk feed transport vehicles include: a) Bulk feed transport vehicle: b) Bulk feed transport semi-trailer: c) Bulk feed transport trailer 3 Drum or bulk feed transport vehicle load plate should comply with the provisions of Table 1. Both ends of this series can be R10 series specified in G2T321. Table 1
Bulk feed transport semi-trailer load sheath meets the requirements of Table 2, load 2
National Machinery Industry Cell 1999-08-06 approved 4
2000-01-01 implementation
Basic energy data wwW.bzxz.Net
JB/T9868.1-1999
Minimum vertical separation H, water separation, and horizontal separation of the unloading port The values ​​of the surface rotation angle B, the depression angle of the plumb plane (see enclosure, Figure 2, Figure 3), and the material avoidance volume \ shall comply with the provisions of Table 4. Table 4
-25~~+60″
20*-+60
left and right 18ar
15.3-17.2
-15u-+6xr
JB/T98681--1999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.