Some standard content:
ICS85.C60
Classification number: Y31
Preparation number: 157512955
Light Industry Standard of the People's Republic of China
QR/T2699-2005
Plaster linerboard
Published on 2005-03-19
National Development and Reform Commission of the People's Republic of China Implemented on 2005-09-01
This standard is proposed by China Light Industry Association.
This standard is the National Paper Standardization Center! . Foreword
QB/T2699-2505
This standard is issued by China Papermaking Research Institute. Participating units: China Resources Paper Group Co., Ltd., Chengdu Jinshan Natural Gas Co., Ltd.
Personnel: Wang Hua, Xixing, Ye Yong, Zhang Xuepai
Paper-faced stone board and paperboard
QB/T26992005
This standard specifies the classification, safety, test methods, sampling, marking, packaging, transportation and storage of paper-faced stone board. This standard is applicable to the production of paper-faced stone board. 2. Specification reference documents
The clauses in the following documents shall become the clauses of this standard. For any document with a date of H, all subsequent modifications (excluding missing content) or design are not applicable to this standard. However, the latest version of this document shall be included in the standard. For referenced documents without specifying the date, the latest edition shall apply to this standard. GB/T451.1 Paper and paper sample preparation (GB/T1502002.Eq150186:1994) GB/T451.2 Paper and paper cutting size and deviation measurement (GB/T451.2-2002, Eq150536:1995) GB/T41.3 Paper and paper length measurement (GB/T451.3-2002, Eq150536:1995) 534:198 GB/T453 Determination of anti-stiffness of paper by linear discharge (return method) GB/453-2002, 1 [5O19211:1992) G/T458 Determination of air permeability of paper (Shore method) (GB/1453-2002, EqY [S05636-2:1984) GB/462 Determination of water absorption of paper and paperboard (OB/T462-2003, SO287:185, M0) GB/T1540 Determination of water absorption of paper and paperboard (GH/1 1540-2002, es) 1ISO535:19912CB2328.1 Digital sample control test procedure Part 1: Acceptance limit (AOL) test required for each test (GB/12828.12003.ISO2359-1:1999, TT) GB/T5402 Paper and paperboard Determination of air permeability Medium field> Ferdy method GB/T5402-2003, 1ISO56365:198 Jin, MODi
Paper, paper Determination of brightness (mouth) of board and shrinkage pulp by radiographic/direct method (B/T7974-2002, GB/T94470:1999.) GB/F8940.1 Method for determination of whiteness of paper and paperboard by directional analysis (GB/TH940.1-1988, TAPPIT452os1983) GB/10042 Method for determination of whiteness of paper by directional analysis (GB/T10739 Paper). Standard strip for processing and testing of paperboard (GB/T107-2002, S0137-1990)
Test method for tensile strength of printed paper (constant return tensile impact method) 0R/T12914-1991, CqV1S0GB:T12914
1924-2:19$51
3 Terms and definitions
A list of terms and definitions applies to non-standard sheets. 3.1
gypsum board facing paperboard
plasterlinerboardwww.bzxz.net
production of paper-faced gypsum, covering, 7 core two, sheep can write right paste material cattle fixed address bonding a constant paper newspaper: 3.2
front paperboard taceboard
QB/T2099—2005
ten production has ten thousand micro-inner bearing fee under the pulp teaching paperboard (paper for small construction decisions) 3.3
back paperboard
backboard
cow production has no certificate of connection rate and the lawsuit long (construction continued use bottom level) 4 classification
4.1 stone sales speed expansion certificate skin points real industry low and advertising Shang board 4.2 white this newspaper guard south group is extremely divided into according to quality type price:! 、… Calculation、Qualified products 5.1 Special board face plate should be marked with a simple table! Must be carded or in accordance with the requirements. 5.2, or expand the roll, the mountain can be natural board south width is 1225m~12 good mm, the back jump board filling width is 35mm~1205mml. Worry code mm: lift can be light vertical light is 11ulmm~1800mm report production requirements: 5.3 Stone furnace paper should not be small semicolon to the effect, each batch of grade report should be a year of effect table 1: Yu Boer method: Gaoerlai method) (face groove) Zhengguo paper version Zhengxian Zheng
Expand the net point
number/what
mature F
When: Home Law Home Gao Donglai Society optional small one test flow. Color service board guard front letter uneven check have degree: degree: book position
Sum/ra-s
/jKrnt
.c/4 00
:5.c--50.0
10.60/3.(
20.00/3.400
:0.0--14.0
3.4 paper foundation shows the paper of the counter and the paper should be flat, not empty, mouth, and eyes and other external jumps. 5.5 old slightly flat, there should be pin teeth and domestic south appearing below. 5.6 volume of my small should be ten regular, solid, not evil, not fire jump edge of the root paper up. 5.7 signature of the beautification of the product should be type 1,
5 0~Price standard industry output direction
10.00.2.60
10.09/2.60
etc. products should be interpreted individually, warehouses are not expected, and more should be taken. 6 test parties
B.1 Test light according to GB45
6.2 Test exchange and test standard A gas you-piece control B/T1073 line 6.3 quantity report GT451.2 test.
6, 4 case code stock G/1 451.2GB/ 451. 3 plan music. 6.5 delivery gas chase according to B: T458 or CB/T5402 test 2B:1 2699 -2005
6.6 full degree! Technical CI/T7974 or CiF/800.1 test, cutting according to (71 test. Zhang version GBT453 or GBT1294 test, China war according to GBT1214 test 8.
6.3 or according to GB/T1540 determination, no time 31 delivery moisture according to GD: 462 determination
Shuang paper network with a test
? Pick out the bar
71 with a change of some as one but no retribution rate "called a,:, should be ordered by the high return of the cattle produced in Shanghai national low authorized in accordance with the requirements of this standard, each piece of output delivery time and space attached to the theory of the original identification of the reduction of 7.3 counting inference age according to GB/T2R28.1 to determine the sample position for the volume. Acceptance limit (AQL), transparency, non-degradation, A center, 4.0: quantitative, degree, brightness, whiteness), garbage water. , variable moisture, small size deviation, according to the head, view, 4.=65. Fang Yue Zheng Festival late one buckle plan: water test for the nature of the competition water test:: 7 (Table 2) Table 2
151 --2 off
7.4 can be accepted-female determination
positive, investment verification and sample removal, etc.
AQ2L =4. 0
whole water-
this is rain
AQL=G:
The second language and case of the modified product quality inspection shall be given in the first place. The first acceptance rate of the product shall be determined according to the acceptance rate: if the product is found to be unqualified during the work, the product shall be accepted according to the acceptance rate, and the acceptance rate shall be determined according to the acceptance rate. If the first sample contains a small number of small products with high efficiency, the first sample will not be accepted, and the second sample will not be accepted. If the first sample is found to be incompatible with the first sample, the first sample will be accepted. If the first sample is not compatible with the first sample, the first sample will be accepted. If the second sample is not compatible with the first sample, the first sample will be accepted. If the first sample is not compatible with the first sample, the first sample will be accepted. If the second sample is not compatible with the first sample, the first sample will be accepted. If the first sample is not compatible with the first sample, the first sample will be accepted. If the second sample is not compatible with the first sample, the first sample will be accepted. If the first sample is not compatible with the first sample, the first sample will be accepted. If the first sample is not compatible with the first sample, the first sample will be accepted. If the first sample is not compatible with the first sample, the first sample will be accepted. /T2699-2DD5
9 Marking, packaging, transportation, storage
B.1 The marking and packaging of the heavy-grained paperboard of gypsum board shall be carried out in accordance with GB/T10342 or other relevant requirements. The gypsum board facing paperboard shall have an outer packaging, and the two ends of the paperboard shall be blocked to prevent the sheet from being pressed: 8.2 The gypsum board facing paperboard shall be checked and kept to prevent moisture. 8.3 During transportation, the roll shall be transported with clean transportation tools. 8.4 Do not drop the paper from a high place.
8.5 If the product is deteriorated or otherwise damaged due to storage or transportation that does not meet the requirements of this standard, the party causing the loss shall be responsible.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.