This standard applies to single-color and multi-color soles and heels made of rubber as the main material through molding. This standard does not apply to twice-vulcanized soles, soles and heels for special purposes such as acid resistance, alkali resistance, oil resistance, cold resistance, insulation, and conductivity, and microporous rubber soles. HG/T 3082-1999 Rubber Soles HG/T3082-1999 Standard download decompression password: www.bzxz.net

IS 61.050
Y 75: Y 78
Chemical Industry Standard of the People's Republic of China
(1999)
Published on April 20, 1999
Implementation on April 1, 20000
National Shishan and Chemical Industry Bureau
Registration No.: 28091999
H core/T3082-999
Standard layer non-equivalent to the second industrial standard 11S50071552 shoelace speed government bottom and international standard 15069071198 4 Research and Development of Chemical Industry Standard H/3082-1985 Rubber Cavity Shoe Material Specification
This standard is revised compared with HG322986: specification, referenced standards, definitions, product classification, etc., the degree of corrosion resistance of rubber soles and the thickness difference of rubber soles are modified, the degree of elasticity is increased, and the performance indicators are defined accordingly.
"The quality of the rubber sole is divided into two categories: the quality of the rubber sole and the quality of the rubber sole. The sole section is the original one for the transportation company. The quality of the rubber sole is different according to the requirements of the hard sole. Its physical performance indicators are assessed at two levels: 1 and 2. The appearance quality is divided into two levels: grade 1 product and grade 2 product. The qualified product is only one level: the external quality inspection indicators have undergone major changes. The frequency of physical performance inspection is 1000~1033 pairs for a batch of less than 1033 pairs (at least one random inspection) and the manufacturer is required to inspect the quality of the product! If the quality inspection door is negative, the inspection will not be completed according to the regulations. Appropriate additional tests and modifications have been made to the contents such as marking, packaging, transportation, and storage. Contents agreed upon by both parties: This standard shall be effective from the date of this publication and is dated H30821986. This standard is proposed by the Technical Supervision Department of the Ministry of Chemical Industry of the People's Republic of China. This standard is issued by the National Technical Committee for Standardization of Rubber and Rubber Products, Shanghai Hongyuan Industrial Parts Mould Co., Ltd., Shanghai 1 Stock Shoe Research Institute, Tuhaicheng School Rubber Factory: The main drafters of this standard: Xue Xiaoning, Zhang Li, and Biaoqiyun. This standard is urgently issued as a national standard and is a recommended chemical industry standard with a new issue number. 1 Scope
Chemical Industry Standard of the People's Republic of China
Rubber soles
Kubber Soling
HC/T3082--1995
代4:/130%2-1
The six standards define the definition, product classification, price requirements, test methods, inspection rules and marking, packaging, transportation and storage of rubber. This standard is limited to single-color and multi-wrapped leather and shoes made of overmolding. This standard is not applicable to double-chemical soles, acid-resistant, alkali-resistant, oil-resistant, heat-resistant, cold-resistant, and other special soles and channels, and is not suitable for the use of the following standards. 2 Reference standards
The following standards contain the text, which constitutes the provisions of this standard through the reference in this standard: When this standard is published, the versions shown are valid: All standards will be stored, and the parties using this standard will consider the possible migration of the following standards to the latest version. GB/528-92 Determination of tensile properties of fluidized rubber and thermoplastic rubber (GB/529-31 Determination of crack resistance of chemically induced rubber, right angle test format) B/53.-31 Determination of strength of chemically induced rubber (nTS) 761S:5) GB/633-21 Determination of tensile strength of chemically induced rubber 6-828) Determination of tensile strength of chemically induced rubber G2311! E According to the standard test method of rubber sample, the rate of return, humidity and time are tested in the environment of rubber sample. The general requirements of the chemical reaction of rubber to the scratch test are as follows: H7T2373-1497 rubber properties test method 3 The technical standard adopts the following definitions: 3. Called ilk-ank and require that there should be no small buying point on the surface: 3-2 Scratch Ei: There should be a scratch on the surface, 33 open rack and crack on the surface, 34y se and the material should not be combined after chemical reaction to produce a gap. 3.5 years old edge h
peony after four peaks of the edge of the surplus and shape neck material. 3.6
science bottom production careful below for the special section station connected with the state petroleum and chemical industry bureau 1999-04-20 approved 20C0-04-01 implementation
3.7 smooth edge trinning
will group bottom skin hope repair the master of the morning glory
3.stageredmulc
nuclear power light line mutual sales
3.9 color celourmigra=on
HG/3082—1999
fluidized sole user a front color cavity material overall trend prescribed position fall people to lead a color cavity material in the big you. 4 Product classification
4. According to the type of leather soles, they are divided into two categories: sensitive rubber soles (hardness not less than 3) and hard rubber soles (hardness not less than 4.2 Soft and quick-acting soles are divided into sports soles, light soles and running shoes. 5 Requirements
5.1 Quality grade
According to the physical and mechanical quality, the product without quality index is a non-qualified product. 5.7 Physical and mechanical semi-mechanical
should comply with the provisions of the table and the table,
new cars are approved, not wwW.bzxz.Net
frequency health, printing Er A type, all
pure meaning.Me/rn
should be,
xiao: Wanxing does not crack
soft rubber has no substrate present mechanical properties
hi-rin
Table 2 also quality list collection distinguish substrate present car energy
pulling speed, P0
break long market coupons
fast press you Le A is the store
B Hai My/n
important en
let: 1 garbage: labor group 2 no: female station, more social, light use silicon (including the chapter called special! 5. 3 External quality
Should comply with the provisions of the table,
F5-- xo
Gas leakage. Sand,
Sports Han Xin
HG/T 3082-1999
Clothing 3 External quality
Conspicuous parts and force parts are not allowed in non-
Conspicuous parts are allowed to change the following:
Book position is not allowed in non-conspicuous parts
Light is not allowed in
Not more than 1 tnur. 2 places
Product clear you two vision is not big u
This day is limited to 1.3mm
Product month parts and force parts are not allowed to be non-
The area is large T
[depth is not more than 1 mm limit: place - lower back is not allowed in the lower 2. 5 mm. 2 places Place, small photos are beautiful
Long Wenyun is alive
wasted military degree
too uneven
Han Lie Xin
slight, not affected by the big view
lightly do. Don't worry about the relevant situation
technical standards have
1 meter standard minister same color*no color difference; the same batch
book k+? m
do not hope to
repair with light, no bottle
big? : mm
agricultural standards have
clothing is difficult to have
Apple book clear, no shadow beauty dead||tt ||Good effect, no effect on the head
Good effect, small image single beautiful
No secretion
Seek the same fish color old light number - no
standard: grade
area is not more than mm
No stagnation
No with
color purple, does not affect the situation
cause purple, does not affect the beauty
photograph the color position lightly, no
all look at the same batch of color objects: batch shoes color base car consistent
Quickly recognize the square light band, no double report
death, make it greater than 1. = :0L
Edge trimming is neat, the width of the missing
is not less than 1.5mm
, the shadow is not slight, the edge
is lightly colored, the shadow interval is extended: the pressure makes
color light grid, not just the developer is beautiful;
The work volume does not look at 1cmmm, each color part is not more than 3m, the area is not limited to mm:
Each outstanding part of the civil part is not shorter than the bottom item·The color part is required to be longer than: 3mm, the surface is not more than
, the length is not 2mm, the surface is not 3.5:d:-more than 15
3nmm. The color surface device is not more than
Note 23mm: the device is not shorter than 451m: the total area is shorter than u.
The part that is not specified has its own boundary
The product is not specified: the style is not specified in the air
The size is not specified in the figure
The design is not specified in the 40mm range, no account! The product is not more than 2 mm, the film hole is not included in the pressure effect, the board is treated as if the items are not included, and all products that are older are judged as unqualified products. 6 Test methods 6.1 Mechanical properties test According to the provisions of HGT2198, the overall system is in accordance with the provisions of 1, 2941. 6.2 Performance determination according to GB/T52K. The test piece is determined as [type call age state. 6.3 Tear film can be measured according to (1/T3 29 regulations are implemented:
6.4 Determination of environmental performance
According to the regulations of GBT531.
5.5 Determination of density
According to the current regulations of GB5S5
6.6 Determination of state material performance
IGT3082
According to the regulations of F16, if the length of the film is not enough, it can be changed to the bottom, the force is reversed, and the test of the resistance performance is completed
According to the regulations of HG2873:
What are the inspection rules?
? .1 Physical resistance torsion resistance test ★ should be from the finished product : If it is impossible to reduce the production of tablets from the intelligent delivery or social restrictions, a tablet can be used as a test piece. The performance of the machine can be guaranteed by a single emergency rescue certificate: 53U double batch (less than 10C double batches shall be tested for less than 1 time. The number of finished products in each group of mechanical gears shall be tested. The test results shall be called the performance indicators of the platform. If there are any items that do not meet the performance standards, the company shall pay compensation for the transfer of batches or product requirements or performance limits. For those items that do not meet the requirements, the company shall re-test them. The results of the re-inspection are summarized. If the data are in compliance with the performance indicators, the state will judge the batch of products as unqualified: Recommend a new set of data for each performance to mark, and see the group data still does not meet the requirements of the parts, the change of the internal group performance plan is not in line with the public performance standard, then the batch of products is not qualified. 1. The quality inspection of foreign states is required to be carried out on a daily basis, and it can be supplemented by quantity only when necessary. Only the single-flavor or double-flavor inspection of the shoes or shoes is limited to six flavors. 2. Labeling, packaging, transportation, storage
3.1 Marking
8.1.1 Each shoe shall be marked with the following: a) Carrying number:
5) Trademark or product name,
8.1.2 The following markings shall be required for the package:
)! Name:
) Trademark or product name
-Number:
d Work:
t) Number:
Lanzhou.
If the supply and demand parties have agreed on the gas, the two parties shall agree on the heat. R.2 Packaging
Light, no milk loss, use low-carbon, plastic bags, woven bags, boxes or one or more of the packaging, or the packaging materials agreed by the supply and demand parties:
8.3 Transportation
Transportation, acid, oil and other chemical substances should be placed together to avoid rain and light exposure. 8.2 Transportation
u" There is dry paint in the environment, in the shade, in the wind, 1m away from the heat source. Avoid strong light exposure: h) It is strictly forbidden to pile up with other chemical substances that are slow, corrosive, and corrosive under the above-mentioned storage conditions and in the original packaging. The products should meet the safety requirements of various standards. 14
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.