GB/T 3668.1-1983 Dimensions of multi-axis boxes and input shafts for common components of modular machine tools
Basic Information
Standard ID:
GB/T 3668.1-1983
Standard Name: Dimensions of multi-axis boxes and input shafts for common components of modular machine tools
Chinese Name:
组合机床通用部件 多轴箱箱体和输入轴尺寸
Standard category:National Standard (GB)
state:in force
Date of Release1983-05-09
Date of Implementation:1984-03-01
standard classification number
Standard ICS number:Mechanical Manufacturing >> 25.060 Machine Tool Devices
Standard Classification Number:Machinery>>Metal Cutting Machine Tools>>J58 Combined Machine Tools
Publication information
other information
Release date:1983-05-09
Review date:2004-10-14
Drafting unit:Dalian Modular Machine Tool Institute
Focal point unit:National Technical Committee for Metal Cutting Machine Tools Standardization
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 3668.1-1983 Dimensions of multi-axis boxes and input shafts for common components of modular machine tools GB/T3668.1-1983 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Common Components for Modular Machine Tools
Multi-spindle heads-Casing and input drlve shaft dimensions
Modular units for machine tool constructlon-Multi-spindle heads-Casing and input drlve shaft dimensionsThis standard is completely equivalent to ISO2912-1973 "Common Components for Modular Machine Tools
Multi-spindle heads-Casing and input drlve shaft dimensions".
This standard specifies the basic dimension series of multi-spindle heads for modular machine tools and the relevant interchangeable dimensions of the multi-spindle heads input shaft connected to the motor coupling.wwW.bzxz.Net
2 Nominal dimensions
The nominal dimensions of the multi-spindle heads are specified in terms of the saddle width of the corresponding slide. The following nine nominal sizes are used:
125, 160, 200, 250, 320, 400, 500, 630 and 800mm. 3 Dimensions
The basic dimension series of the multi-axis box body shall comply with the provisions of Figure 1 and Table 1. 3.1
3.2 The input shaft dimensions shall comply with the provisions of Figure 2 and Table 2. rrn
National Bureau of Standards 1983-05-09 Issued
Figure 1 Multi-axis box body
1984-03-01 Implementation
Box width
GB 3668.183
Table 1 Multi-axis box body dimensions
Nominal dimensions
Body height
Nominal dimensions
Note: ① The dimension with · is preferred. ② The installation ruler is for reference.
Additional Notes:
GE 3668.1—83
Figure 2 Input Shaft
Table 2 Input Shaft Dimensions
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China. This standard was drafted and managed by the Dalian Modular Machine Tool Research Institute of the Ministry of Machinery Industry. The main drafter of this standard is Cao Weiqian.
From the date of implementation of this standard, the original Ministry of Machinery Industry standard JB1524-75 "Nominal Dimensions and 5 Change Dimensions of Multi-axis Boxes for Common Components of Modular Machine Tools" will be invalidated.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.