title>JB/T 9162.32-1999 Flat contact dimensions - JB/T 9162.32-1999 - Chinese standardNet - bzxz.net
Home > JB > JB/T 9162.32-1999 Flat contact dimensions
JB/T 9162.32-1999 Flat contact dimensions

Basic Information

Standard ID: JB/T 9162.32-1999

Standard Name: Flat contact dimensions

Chinese Name: 平触头 尺寸

Standard category:Machinery Industry Standard (JB)

state:in force

Date of Release1999-05-20

Date of Implementation:2000-01-01

standard classification number

Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools

Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture

associated standards

alternative situation:ZB J44001.32-87

Publication information

other information

Focal point unit:Mechanical Science Research Institute

Introduction to standards:

JB/T 9162.32-1999 JB/T 9162.32-1999 Flat contact dimensions JB/T9162.32-1999 Standard download decompression password: www.bzxz.net

Some standard content:

JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
Machinery Industry Standard of the People's Republic of China
Flat contact
Dimensions
Flat coataet
Dimonsions
This standard specifies the types and dimensions of flat contacts. Types and dimensions
Types and dimensions shall be as specified in the following week.
Marking example:
Marking of half contact with diameter of 3mm:
Contact March/9162.32—1999
National Machinery Industry Bureau 1999-05-20 approved JBT9162.32-1999
Replaced J4101.32-87Www.bzxZ.net
2000-01-01 implemented
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.