JB/T 3341-1999 Basic parameters of pallet stacker JB/T3341-1999 Standard download decompression password: www.bzxz.net

ICS53.060
Machinery Industry Standard of the People's Republic of China
JB/T3341-1999
Pallet stacking trucks
Basic parameters
Palletstacking trucksBasic parameters1999-06-28 Issued
National Machinery Industry Bureau
2000-01-01 Implementation
JB/T3341-1999
This standard is a revision of JB3341-83 "Basic parameters of pallet stacking trucks". During the revision, the original standard was edited and the main technical content remained unchanged.
This standard replaces JB3341-83 from the date of implementation. This standard was proposed and managed by Beijing Hoisting and Conveying Machinery Research Institute. This standard was drafted by: Beijing Hoisting and Conveying Machinery Research Institute. The main drafters of this standard are Jiangnan, Shen Wanquan, Chen Xing and Zhang Jingxiang. 1
1Scope
Machinery Industry Standard of the People's Republic of China
Pallet stacking trucks
Basic parameters
Pallet stacking trucksBasicparametersThis standard applies to battery pallet stacking trucks. The operation mode of pallet stacking trucks is walking operation and vehicle operation (standing or sitting). Model indication method
Pallet stacking truck models are indicated by type, power type and lifting capacity. CD
Improvement code: Lifting capacity is expressed in alphabetical order: t
Battery code
Pallet stacker code
Marking example:
The first improved battery pallet stacker with a lifting capacity of 1.0t is marked as: Pallet stacker CDDI.0A
1JB/T3341—1999
3 Basic parameters
3.1 The basic parameters of pallet stackers shall comply with the requirements of Figure 1 and Table 1. Door
National Machinery Industry Bureau approved JB/T3341-1999 on June 28, 1999
Replaced JB3341-83
Implemented on January 1, 2000
Rated lifting capacity
Load center distance
Maximum lifting height
Outer distance of forks
Inner distance of forks
Minimum height of forks
Fork length
Minimum ground clearance
Maximum operating speed without load
Maximum operating speed with full load
Maximum lifting speed with full load
Full-load climbing grade
Rated battery voltage
Minimum outside turning radius
Note: The values ​​in brackets can be used as needed, JB/T
Stand, sit
Stand, sit
3341-1999
≤1450
≤1500
≥180
≤1600
≤1650
≤1800
The lifting height and fork length of the pallet stacker should preferably use the values ​​in the table, and can also be selected from the following series as needed. 3.2
a) Lifting height series:
2000, 2500, 2700, 3000,
3300, 3600,
b) Fork length series:
1200mm
800, 900, 1000, 1150,
4000mmwww.bzxz.net
Mechanical industry standard
Basic parameters of pallet stacker
JB/T3341-1999
Published by the Mechanical Science Research Institute
Printed by the Mechanical Science Research Institute
(No. 2, Shouti South Road, Beijing: Postal Code 100044)*
1/16 Printing Sheet 1/2 Number of Words 6000
Format 880×1230
First Edition in October 1999
First Printing in October 1999
Print Quantity 1-500
Price 500 Yuan
99-907
Mechanical Industry Standard Service Network: http/AvwwJB.ac.cn666
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.