JB/T 9007.1-1999 JB/T 9007.1-1999 Lifting Slide Type, Basic Parameters and Main Dimensions JB/T9007.1-1999 Standard Download Decompression Password: www.bzxz.net

The revision of JB/T 9007.11999 basic parameters and dimensions. During the revision, only the original standard was edited and modified to ZB JB0008-87 "HQ and HY series lifting pulley standard", and the main technical content remained unchanged. This standard is a part of the JR/T 9007 (Crane pulley) series of standards, which includes two parts: JB/T 9007.1-1999 Crane pulley types, basic parameters and dimensions JB/T 9007.2-1999 Technical conditions for crane pulleys This standard replaces 2BJ80008-87 from the date of implementation. This standard is proposed and managed by the National Technical Committee for Standardization of Hoisting Machinery. The responsible drafting unit of this standard: Beijing Hoisting and Conveying Machinery Research Institute. The main drafters of this standard: Hao Suoyun, Cui Zhenyuan 107
1 Scope
Machinery Industry Standard of the People's Republic of China
Rope pulleyblocksTypes, parameters and dimensions
Rope pulleyblocksTypes, parameters aad dimensionsJB/T9007.1-1999
Replaces ZBJ8)(8—87
This standard is applicable to dynamic and electric wire rope lifting pulleys (hereinafter referred to as pulleys) with a rated lifting capacity of 0.32~3201. Its working grade is M1~M3 specified in GB/T3811. The hook of this standard adopts S grade in JB/T4207. 2 Reference standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised and the versions using this standard will be revised. The parties should explore the feasibility of using the latest version of the following standards, G3/T3811--3983 Crane Design Specifications JE/T1207.11999 Hook 3 Series Parameters for Manual Lifting Equipment
The main parameters of the HQ series pulley (general pulley) should comply with the provisions of Table 2: The main parameters of the HY series pulley (forestry pulley) should comply with the provisions of Table 2.
Pulley diameter
.320.5
Guohao Machinery Industry Bureau 199906-28 approved
5080100161,201250320
Wire straight range
6. 2 -- 7. 7
11 ~14
12. 5~-15. 5
15. 5---18. 5
17--20
26--28
28 --31
51 - 35
34-- 38
2000-01 01 Implementation
Pulley diameter
Variety, type and basic parameters and dimensions
Model expression method
4.2 Marking example
JB/T 9007. 1—1999
Wire rope diameter range
12.515. 5bZxz.net
15. 5~-18. 5
17~-20
23 --24. 5
Rated lifting capacity, t (expressed in Arabic numerals) Number of wheels (expressed in Arabic numerals
Opening (K-peach-type opening, Ka-hook-type opening) Bearing (Z-needle bearing, sliding bearing, rolling bearing) Type (G-hook: L-chain ring: D-ring) Code (HQ or HY)
) Hook-type with fistula bearing open single wheel, rated lifting plate of 2t universal pulley. Marked as; universal pulley HQGZK1-2JB/T9007.1--1999h) Chain ring type with sliding bearing double-door effect wheel, rated lifting capacity of 3.21 universal pulley, marked as; universal pulley HQLK2-3.2JB/T 9007.1—1999c) Universal pulley with ring type closed three-wheel with sliding bearing and rated lifting capacity of 5 t, marked as: Universal pulley HQD3-5JB/T 9007.1 1999d) Chain ring type single-wheel with rolling bearing hook-type opening door, rated lifting capacity of 101 forestry pulley, marked as forestry pulley HY1.Ka1-10JR/T9007.1—19994.3 Varieties and types
The varieties and types of HQ series clearing pulleys shall comply with the provisions of Wu Yingyan Tailiang 3. The varieties and types of IIY series pulleys shall comply with the provisions of Table 4. 109
Polyurethane
Hook type
Chain ring type
Product hook type
Chain ring type
Product street type
Ball type
Ring type
Hanging type
Hook type
Ring type
Product ring type
Chain type
Cool bad type
QGZK1-0. 32
HQE.7K1-(: 32
HQGK1 U. 32
HQ1.K1 2.32
HQG21-0. 32
HQ1.21-0. 32
EICG1-: 32
HQ1.1-1. 32
FHQGZK 1-.
HQI.ZK1-n. |tt||TIQG n. [
HQLK2-1
HEGZK1-2
HQGK1-2
HQGK12
HQEK1 2
HQG21-2
HQ[>2 2
11QGZK1-3.2
HG1.ZK1-3. 2||t t||HQ:K1-3. 2
FHQI.K1 3. 2
HQG21-3.2
HQ1.21-3. 2
HQ1.2-3.2
1QGK2.H.?
HQ1.K2-3. 2
TIQG2 3. 2
H021.3 5.2 | | tt | 8
HQ621-8
HQ>2-8
HQG3-8
HQ33-$
TQZKI-10
HQI.ZK3-11?
HQGK 1-JO | t||HQ12-16
HQS-15
11021. 16
9007.1—1999
Rated lifting capacity,
Ningshu bearing sliding
moving shaft
needle bearing
swimming fast
Li ring type
hook type
plated ring emerald
hook ink
chain ring type
hook type
chain ring type
quality ring plastic
hanging groove replacement
hook type!
Chain ring type
Product ring type
Hook plastic:
Silk ring type
HQGK1-20
HQLK1-20
HQG1-20
HQG2-20
HQ132-20
TEQD3-21
HQNM-20
HQJ5-20
HQI)2-32
HQ[3-32
HQ4-32
HQD5-32
HQ6-32||t t ||HQH3-50 | ||HQD8-200
HQID10-200
HQDJO-2.50
HQI310-320
Rated lifting weight
Emperor hook type!
Hook type
Roller chain type
Hook type
Ring type
Ring type!
Ring type
Rated starting price/1
Variety!
Hook type
Chain ring type
Hook pad
1 axis;
Hook type
Ring type
Ring type
Ring type
Belt ring type! | |tt | 10
HYtl-1o
HY1>3-10
8/ 9007.1 | | tt | | HYGK12 | ||HYLK1-16
HYGI-15
HYL116
HYD2-16
HYD3-16
HYDA-I6
IIYGK1-3.2
HYLK1 3.2
HYGKaJ-3.2
HYLK ul1-3. 2
IIYGK120
HYI.K1-20
HYGKaI 20
HYL.Kal 20
IIYGI-20
HYD2-20
HYD:20
HYD4-20
IEYGK13|| tt||HYGK:-5
JYD2-32
HYI3-32
HYUA32
HYI36-32
HYGKI-H
HYGKal8
JIYLKal
HYGI-K
HYP2-8
HYI3-8
HYD4-R
HYI3-50
HY135-51)
The basic parameters and dimensions of HQ series pulleys shall comply with the provisions of Figures 1 to 15 and Table 5: The basic parameters and dimensions of HY series pulleys shall comply with the provisions of Figures 16 to 32 and Table 6
0.32t.0.5t1.21.3.21.5t.8 and 10t hook (chain ring) type with roller needle auxiliary open door single wheel universal pulley see Figure 1.112
JB/T 9007. -1999
0.32L.0.5t,1t,2t,3.2t.51.,8t and 10 t hook (chain link) type with needle bearing single wheel universal pulley see Figure 2. Figure 2
JB/T 9007.11999
0.32t.0.5t.11,21.3.21+5.81,101+16 and 21 hook (chain link) type with sliding bearing open [I type single wheel universal pulley see Figure 3.
0.32t.0.51.11,21.3.2:.51.8t,10t,16t and 20t hook (chain ring) type with sliding bearing flash type single wheel universal pulley as shown in Figure 4
JB/T 9007.1
1t.21.3.2t,61,81 and 101 ring type sliding bearing closed type single wheel universal pulley as shown in Figure 5 Figure 5
1t.2t.3.21,5t.8 and 101 hook (chain ring) type with sliding bearing double open type double wheel through moon pulley as shown in Figure 6. Figure
JB/T 9007.1—1999
1 t.2 t,3.2 t.5 t,8 t.1U t,16 t and 20 t hook (chain link) type with sliding bearing closed Japanese style universal pulley see Figure 7 Figure?
1 t,2z,3.21.5 t.81,10 t,16 t,201 and 32 t ring type with sliding bearing closed mountain double wheel universal pulley see Figure 8. 8
JB/T 9007.1
3.215L+81,10 t,16 and 201 hook (chain link) type drive bearing closed three-wheel universal pulley see Figure 9 Figure
3.2 t:5:,8 t,10 t,16 t.20 t,32 t and 50 t ring type with sliding bearing closed 1I type: wheel universal pulley see Figure 10, Figure 0
JB/T 9007. 1--1999
8t,10t,16t.20t32t and 50t ring type drive bearing closed four-wheel open pulley see Figure 11 Figure
20 t.32 t, 80 T type lifting block with sliding auxiliary bearing closed type R wheel universal pulley see Figure 121
HYGK12
HYLK1-2
HYGKal-2
HYLKal-2
HYG1-2
HYL1-2||tt ||YT2·2
HYGK1-16
HYGK1-16
HYLK1-16
HYGI-15
HYL116
HYD2- 16
HYD3-16
HYDA-I6
IIYGK1-3.2
HYLK1 3.2
HYGKaJ-3.2
HYLKul1-3. 2
IIYGK120
HYI.K1-20
HYGKaI 20
HYL.Kal 20
IIYGI-20
HYD2-20| |tt||HYD:20
HYD4-20
IEYGK13
HYGK:-5
JYD2-32
HYI3-32||tt| |HYUA32
HYI36-32
HYGKI-H
HYGKal8
JIYLKal
HYGI-K
HYP2-8
HYI3-8
HYD4-R
HYI3-50
HY135-51)| |tt||The basic parameters and dimensions of HQ series pulleys shall comply with the provisions of Figures 1 to 32 and Table 5. The basic parameters and dimensions of HY series pulleys shall comply with the provisions of Figures 16 to 32 and Table 6.||tt| |0.32t.0.5t1.21.3.21.5t.8 and 10t hook (chain link) type with roller needle auxiliary open door single wheel universal pulley see Figure 1. 112
JB/T 9007. -1999
0.32L.0.5t,1t,2t,3.2t.51.,8t and 10 T hook (chain link) type with needle bearing single wheel universal pulley see Figure 2. Figure 2
JB/T 9007.11999
0.32t.0.5t.11,21.3.21+ 5.81, 101+16 and 21 hook (chain) type with sliding bearing open [I type single wheel universal pulley see Figure 3.
0.32t.0.51.11,21.3.2:.51.8t,10t,16t,20t hook (chain link) type with sliding bearing flashing single wheel universal pulley shown in Figure 4
JB/T 9007.1
1t.21.3.2t,61,81 and 101 ring type sliding bearing closed single wheel universal pulley see Figure 5 Figure 5
1t.2t.3.21,5t.8 and 101 hook (chain ring) type double-opening double-wheel moon pulley with sliding bearing is shown in Figure 6. Figure
JB/T 9007.1—1999
1 t.2 t,3.2 t.5 t,8 t.1U t,16 t and 20 t hook (chain link) Type with sliding bearing closed Japanese-style effective wheel universal pulley see Figure 7?
1 t, 2z, 3.21.5 t.81, 10 t, 16 t, 201 and 32t lifting ring type with sliding bearing closed mountain type The double-wheel universal pulley is shown in Figure 8.阁8
JB/T 9007.1
3.215L+81,10 t,16 and 201 hook (chain ring) type drive bearing closed three-wheel universal pulley see Figure 9 Figure||tt| |3. 2 t:5 t,8 t,10 t,16 t,20 t,32 t and 50 t lifting eye type with sliding bearing closed 1I type: wheel universal cleaning car see Figure 10, Figure 0
JB/T 9007. 1--1999
8t, 10t, 16t. 20t32t and 50t ring-type drive bearing closed four-wheel open block see Figure 11
20 t. 32 t, chaotic it and 80 T type lifting pulley with sliding auxiliary bearing closed type R wheel universal pulley see Figure 121
HYGK12
HYLK1-2
HYGKal-2
HYLKal-2
HYG1-2
HYL1-2||tt ||YT2·2
HYGK1-16
HYGK1-16
HYLK1-16
HYGI-15
HYL116
HYD2- 16
HYD3-16
HYDA-I6
IIYGK1-3.2
HYLK1 3.2
HYGKaJ-3.2
HYLKul1-3. 2
IIYGK120
HYI.K1-20
HYGKaI 20
HYL.Kal 20
IIYGI-20
HYD2-20| |tt||HYD:20
HYD4-20
IEYGK13
HYGK:-5
JYD2-32
HYI3-32||tt| |HYUA32
HYI36-32
HYGKI-H
HYGKal8
JIYLKal
HYGI-K
HYP2-8
HYI3-8
HYD4-R
HYI3-50
HY135-51)| |tt||The basic parameters and dimensions of HQ series pulleys shall comply with the provisions of Figures 1 to 32 and Table 5. The basic parameters and dimensions of HY series pulleys shall comply with the provisions of Figures 16 to 32 and Table 6.||tt| |0.32t.0.5t1.21.3.21.5t.8 and 10t hook (chain link) type with roller needle auxiliary open door single wheel universal pulley see Figure 1. 112
JB/T 9007. -1999
0.32L.0.5t,1t,2t,3.2t.51.,8t and 10 T hook (chain link) type with needle bearing single wheel universal pulley see Figure 2. Figure 2
JB/T 9007.11999
0.32t.0.5t.11,21.3.21+ 5.81, 101+16 and 21 hook (chain) type with sliding bearing open [I type single wheel universal pulley see Figure 3.
0.32t.0.51.11,21.3.2:.51.8t,10t,16t,20t hook (chain link) type with sliding bearing flashing single wheel universal pulley shown in Figure 4
JB/T 9007.1
1t.21.3.2t,61,81 and 101 ring type sliding bearing closed single wheel universal pulley see Figure 5 Figure 5
1t.2t.3.21,5t.8 and 101 hook (chain ring) type double-opening double-wheel moon pulley with sliding bearing is shown in Figure 6. Figure
JB/T 9007.1—1999
1 t.2 t,3.2 t.5 t,8 t.1U t,16 t and 20 t hook (chain link) Type with sliding bearing closed Japanese-style effective wheel universal pulley see Figure 7?
1 t, 2z, 3.21.5 t.81, 10 t, 16 t, 201 and 32t lifting ring type with sliding bearing closed mountain type The double-wheel universal pulley is shown in Figure 8.阁8
JB/T 9007.1
3.215L+81,10 t,16 and 201 hook (chain ring) type drive bearing closed three-wheel universal pulley see Figure 9 Figure||tt| |3. 2 t:5 t,8 t,10 t,16 t,20 t,32 t and 50 t lifting eye type with sliding bearing closed 1I type: wheel universal cleaning car see Figure 10, Figure 0
JB/T 9007. 1--1999
8t, 10t, 16t. 20t32t and 50t ring-type drive bearing closed four-wheel open block see Figure 11
20 t. 32 t, chaotic it and 80 T type lifting block with sliding auxiliary bearing closed type R wheel universal pulley see Figure 12
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.