CB/T 3466.12-1992 Marine lock drawer lock
Basic Information
Standard ID:
CB/T 3466.12-1992
Standard Name: Marine lock drawer lock
Chinese Name:
船用锁 抽屉锁
Standard category:Ship Industry Standard (CB)
state:in force
Date of Release1992-03-07
Date of Implementation:1992-10-01
standard classification number
Standard Classification Number:Ship>>Outfitting Equipment>>U25 Cabin Equipment
associated standards
Publication information
other information
Introduction to standards:
CB/T 3466.12-1992 Marine lock drawer lock CB/T3466.12-1992 standard download decompression password: www.bzxz.net
Some standard content:
Ship Industry Standard of the People's Republic of China
CB/T3466.1~3466.12—92
Marine Locks
Published on March 7, 1992
Implemented on October 1, 1992
Ship Industry Standard of the People's Republic of China
Marine Locks
Subject Content and Scope of Application
Drawer Locks
This standard specifies the types and main parameters of marine drawer locks CB/T3466.12-92
Classification Number: U25
This standard applies to pin drawer locks such as high-head locks and low-head locks installed on furniture cabinet doors and drawers of various ships. Reference standardswwW.bzxz.Net
CB/T3466.1 General technical conditions for marine locks 3
Types and main dimensions of marine drawer locks
The types and main dimensions of marine drawer locks are shown in Table 1 and Figures 1 and 2. Table 1
Marine high-lock drawer locks
Marine low-lock drawer locks
Applicable range
Steel drawers, cabinet doors
Wooden drawers, cabinet doors
Approved by China State Shipbuilding Corporation on March 7, 1992 38
Inch, mm
Weight, kg
Implemented on October 1, 1992
CB/T3466.12-92
Figure 1 Marine Low-lock drawer lock
1--bottom plate; 2-lock tongue: 3-cover; 4-lock head; 5-key39
Marking example
Marine high-lock drawer lock
-lock tongue: 2
CB/T3466.12-92
Lower shell; 3
Marine lock JG1CB/T3466.12-92
5 Technical requirements
Main parts and materials of marine drawer locks are shown in Table 2. Name
Key, lock tongue
Marine high-lock drawer lock
Upper cover; 4 lock head; 5 key: 6 lock plate
Casting brass ingot
Ordinary carbon cable steel
Brass plate
Other technical requirements shall comply with the provisions of CB/T3466.1. Brand
HPh59-1
HPb59-1
Standard No.
GB2041
Additional Notes:
CB/T3466.12-92
This standard was proposed by the 603 Institute of China National Shipbuilding Corporation. This standard was drafted by Shanghai Shipyard.
This standard was drafted by Wuxi Suoguang. The main drafter of this standard was Shu Yaping.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.