Machinery Industry Standard of the People's Republic of China
JB/T 8368. 1—96
Electric Hammer Drill
1996-04-22 Issued
Ministry of Machinery Industry of the People's Republic of China
1996-07-01 Implementation
JO/T8368.1-46
This standard is formulated with reference to German Standard 13INB055B3 and Chinese Standard NFE66-90.
Appendix A and Appendix B of this standard are the appendixes of the standard. The standard is proposed and approved by the National Technical Committee for Standardization of Cutting Tools. The responsible unit for the reform of this standard is Chengdu Tool Research Institute. The drafting unit of this standard is Shangyuan Chuansha Si Ke Gong Yue, this standard is January! ，Chengdu Haichang Tools Co., Ltd. and Jiangsu Industry and Trade Cooperation Huangqiao Tools Factory Technical Standard Main Drafters: Chuanliang, Jiang Qianfei, Zha Guobing, Chu Jijun, Bang Guimei, Bie Ping, Ji Jianke, Jiao Yuhua,
This standard shall be implemented from July 1, 1995.
Machinery Industry Standard of the People's Republic of China
Electric Hammer Drill
JB/T8368.196
Wood Standard Specification for Type and Size, Appearance and Roughness of Material Grain and Hardness, Performance Test and Technical Specification for Labeling and Packaging.
This standard applies to the true universal ~ 50mm electric key drill for pin holes in concrete and other materials without metal content. 2 Referenced Standards
The texts contained in the following standards constitute the texts of the technical standards through citation in this standard. When this standard is published, the versions shown are valid. All standards will be revised. All parties using this standard should discuss the feasibility of using the following standard to measure the new version. GB/T3478.11995 Basic tolerance of sharpness of straight toothed splines GEI107-87
J3/896
3 Symbol
d Electric hammer station diameter:
? Two lengths:
L Total length;
d,. Shank positioning diameter
Type and size
Standard for strength inspection and evaluation of mixed
The type and size of carbide blade chain drills for impact drills and electric chain drills are shown in Figure 1 and Table 1. The electric strength station is straight through 4. After removing the protective layer or hard gold blade, turn and measure the mother. 21 is the length of the electric drilling rig support head. Figure 1. Approved by the Ministry of Machinery Industry on April 22, 1996. Implemented on July 1, 1996. Basic size. Limit. -1 0, 25. JB/T 8368.1--96
Technical series
Super long series
There are 4 types of handles: type 1 (button handle), type 2 (push handle), type 3 (four-pull square handle), type 4 (double push steel handle), type E (double handle), type F (four-drawn handle), type G (square handle), type H (square handle), type 1 (square handle), type J (interlaced handle), type K (spider handle), and type S (national digging chain handle). The type of parts shall be recorded as required (the specifications of which shall be in accordance with the requirements of 4.3). The position tolerances of electric drill bits are given in Table 2. Table 2: Vehicle part drawings for the final tolerances of the final tolerances due to runout 60·-100 100-200 3uu~30y>4:2~5 Make the alloy: For the body line, only the material to be changed before the factory is moved to the main gasket 2-x~-:n JB/T 8368.1-96
Table 2 ()
6u~:o0
l0uyuc
Performance: The first position of the battery is within the tolerance. See the attached specification for the inspection grid! , 4.4 Standard example
Diameter 13. Modification limit 150. Support for the type of original polished electric pin 1815EJB/8368.1-116
5 Material and hardness
5.1 The hardness of the electric pin can be alloy! According to the provisions of 1B/T 8369, 8g4
5.2 The body and material of the electric pin shall be made of C or other brands with the same performance as above, 5, 3: The electric pin shall be heat treated from the bottom of the blade (mm) to the vehicle body, and its hardness shall not be less than 0HR. The surface roughness of the target is
2-10~3
6.1 The electric drill bit can be semi-solid, and there should be no cracks, scratches, slag, pores and penetration. That is, the cutting blade should not have any defects that affect the performance. 6.2 The upper limit of the surface performance of the electric drill is as follows: the front and rear R of the electric drill bit are broken. 12.5r::
Abstract <Positioning example part)R, 3.2:
(3Electric performance test
Batch of dust-produced good drills, to ensure that the batch should be cut into pieces to be able to oil interception test 7.! Test conditions
, 1, 1 Test machine: The test drill rig meets the requirements of the corresponding standard sieve. 1.2 Number of test pieces 4 Number of test pieces 5 stoves
7.1.3 Test materials: The test materials are authorized by G date 110. Use Lu Ze condensation 1 other materials of the same quality, 7.1.4 Test specifications: The performance test of the electric evaluation light is at a speed greater than 25/ mim, select the drilling rig with the number of blows greater than 200/min, the hole depth of each blow of the electric hammer is (/, the hole depth of the weak accumulation is 0.5t.7.1.5 Test force: The electric chain drill after the test should have no core, desoldering, cracks and other phenomena. If the performance does not meet the above requirements, the energy test of the electric lithium drill is judged to be qualified.
8 Marking and packaging
8.1 Marking
81.1 The drill should be marked on the power station:
) Electric drill self-diameter;
6) Manufacturer or trademark,
8 1.3 Packing box 1: Should be marked:
JB/T368.1
) Name of manufacturer or seller, place of origin and trademark; b) Mark of electric drill:
:
) Material code or number:
c) Year and month of manufacture
82. The electric drill will be treated with anti-corrosion in the packaging, and the packaging must be reliable to prevent quality from being transported. JB/T8368.10F
Type and size of electric drill
(standard record)
The core structure and size of type A are shown in the technical drawing. sa
A23 type quality dimensions of the two parts of the type and size as shown in Figure A2: ei
11 20. 330
AC type quality (four according to the two types and size as shown in Figure A. 3--
R/T 8368. 1.96
A4D type plate (double figure suppression) of the vehicle dosage form of the body as shown in A4.LE=01-
.sx ar
45E type handle double draw tree car type and size report A5 this 41
upper limit description of the disease part type and size as shown in the connection - tp
JB/T $ 368.1-96
A7 type car < car > tree type and size as shown in A7?
18H this seal (square car disassembly part type and size as shown in A8 1C
1 principle (six car) beat part type and size as shown in Figure A5. A
3 × 451
JB/T.8368.196
A10J type handle (straight spline two 1 stem type and size as shown in G/T317&. and Figure A10, 1
-s 5p
A11K type (class vegetable flower chain handle> leather picking part style and size as shown in Figure A11. p
jade power use
spiral angle
Figure A11
A12 type handle two rows of flower chain handle body style and size as shown in Figure A12. - E x - p
Figure A12
spiral rotation
division double also degree
2. JE-2er
JB/T8368.1-96
Appendix B
Testing method for position tolerance of electric drill
(Standard time record)
The testing method for position tolerance of electric drill is listed in Table B1: B1
Inspection items
According to the regulations
Testing method
Put the blade body as the part
Align the tool body axis! Dare to be in the V shape, put the magic not greater than the light response center can move
late alloy tool
bzxZ.net outside the example of the symmetrical shop
cutting judge the tool
body through the material
medical drive
22, axial operation positioning, after heating, the table head vertical contact even part positioning net
handle 25 four sub-place), single special electric shaking station
then the effective value
light return both the movement set difference.
Put the knife with the small piece near the groove part
, length
4/2, track user positioning, shield will be the first to inspect the convex
table of the four middle parts of the gold moon piece
, can rotate seven stations left and right, make
percentage display the maximum, then
permit 180\year fixed measurement and record, the difference between the two percentage indicator readings is the accuracy error. Put the knife guard near the tooth
in the V-shaped and put the length less than ten
[/2. Pick and position, after the number of points when the table is measured vertical connection! The outer
blade is cut and rotated left and right,
the part is automatically changed by the value of the system, and then the grid lithium is rotated 13 times and measured again, and the cycle
dial indicator is used as the interval
movement error.
rotten, the V-shaped fast left measuring distance of the electric chain post is not more than 15m. The detection area is Yunnan map
and the instrument frame and the fixed head
V-shaped iron!
dial indicator!
frame and the fixed
plate,
: V-shaped defect,
concave indicator,
deformation and positioning block
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.