Some standard content:
The appendix of this standard is a normative document. This standard is also proposed by China Textile Industry Association. This standard is promoted by the National Silk Standardization Technical Committee. FZ/T43017-2003
The responsible drafting unit of this standard: Hsinchu Jinfuchun Shenglan Chemical Co., Ltd. Zhejiang Huisihu Technology Co., Ltd. (Zhejiang Silk Research Institute
This standard is drafted by Xiangjiang Tianxin Tong Co., Ltd. The main drafters of this standard are Xiong Jianya, Zhou Ying, Ye Shenghua, Fang Xiao, Cai Shulu. This standard has been submitted for deposit.
1 Model
Mulberry silk polyurethane elastic silk
FZ/T 43017—20D3
The standard specifies the classification and requirements of the silk and polyurethane elastic fabrics, including the table and mark. The six standards are used to evaluate the quality of various types of limited whitening, dyeing (dyed > printed) mulberry silk/polyurethane elastic fabrics (silk content above 100%).
2 Normative references
The following documents are cited in this standard and become the references of the standard. For all dated references, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties who have reached an agreement on the technical standard can use the latest versions of these documents. The latest version of this standard is applicable to this standard: GB/T250 color change assessment sample [B2-1995, d150) 105403:1993) GB/F2828 remote batch inspection sampling sequence and pick-up table (applicable to frequent batch inspection) (T2912.1 Textile formaldehyde determination Part 1: Free formaldehyde in water (wood removal) GB/3920 color fastness test for color fastness to storage (GB/921-1997 TS113-X11592 anti-fabric color fastness test for color fastness to washing: test 1 (G3/T3921.1-1S97, eV1S>105-00]:1989) FEVT 3921.1
Test method for color fastness of products (BT39231S95.1S0105E04:14) GB/T 3923.1
G8/T666
GB/T 438?
Test method for color fastness of products Part 1: Determination of breaking strength and elongation of woven fabrics by strip method Determination of the extension of woven fabrics Determination of fabric density Determination of unit length and single surface mass GB, T4669
GB>216.4 Instructions for use of textiles and garments GB/T 5713
GB/T7573
Water resistance test for color fastness to water (GB/T571397G10214 Salt-proof products
Determination of pH value of permanent rate liquid for textiles (GB/7573-2002.ISO3U7119SJ.MOD)GH/8427-1S0% Fabric fastness test for color fastness to artificial light: hydrogen EB/T8S28
Test for small changes in fabric size-Preparation of fabric samples and garments for marking and marking (GBT3526--a2.S075:1ss4)
GB/T8629
GB/T 8430
Textile products
Test method for family selection of dry goods【GB/862921,1505331 Washing and testing method for dimensional change of T media (GB/T6633-2002.1SO3077.1984.MOD) Products
GR/T15552-.-1S95
Silk fabric test method 6
Silk fabric packaging and marking
GB/T15554
B18401 Limit of formaldehyde content of traditional fabrics F/T11052-1S Test method for tensile elasticity of elastic woven fabrics FZ/T1'01595-2002 Test method for hydrogen content of anti-aging products 3 Classification
Sancha silk/oxygen wheel film tensile silk fabrics are divided into double elastic silk fabrics and single elastic silk fabrics. Single-stretch fabrics are divided into single-stretch fabrics and double-stretch fabrics. F2/T 43017—2003
4 Terms and definitions
The following terms and definitions are used in this standard. 4.1
Double-stretch fabrics are elastic fabrics whose warp and weft raw materials contain ammonia. The fabric is elastic in both the warp and weft directions. 4.2
Warp-stretch fabrics
Stretch fabrics whose warp direction contains ammonia. The fabric is elastic in the warp direction. 4.3
Stretch fabrics whose weft direction contains ammonia. The surface of the fabric is elastic in the weft direction, 5 requirements
5, 1. The requirements of the elastic surface include the quality of the fabric, the strength of the single wheel, the change of the water content, the pH value, the elongation, the shape and the external quality, etc. 12 indicators. 5.2 The quality of the silk/spandex is the lowest grade among the various technical indicators of the silk: the grades are divided into superior products, first-class products, second-class products, second-class products, and lower than the first-class products. 5.3 Quality, small strength, ammonia content, small change rate of washing, low color yield, group A content, pH value, elongation, deformation rate, etc., and the width and external quality are evaluated by the match.
Mulberry/polyester stretch yarn fabric classification specifications are shown in Table 1, 5.4
Table 1 Mulberry/polyester stretch yarn fabric classification specifications are shown in Table 1, 5.4
Pre-production difference/《》
Present value difference %
Water tension only
Change electric %）
Present rate/title
Formaldehyde content (mg/kr)
Single inflammatory structure
Dry girl pot
Main products
Size
Note the content
According to H:I
4. f~.7. 5
-E, t
Pulling convexity
External measurement bottom point (points/m>5
Length eight%
Deformation rate six%
Specification: 14cm and below
Table system)
Superior products
F//T43017-20C3
Processing, yarn group and products with special process requirements can also be connected according to the contract or agreement. 2, warp rate, double pre-wire elongation rate, deformation rate, wind change rate can be restored to the contract or block design considerations. 5.5 Appearance quality assessment
6.5.1 The appearance quality assessment adopts a limited cumulative score 5.5.2 The measurement point from the smallest to the scoring starting point, the standard shape of the external library, the quality score or grade. 5.5.3 Products of equal value are not allowed--12 points in a scoring unit can be unified into one~R points in a scoring unit Core loss 5.5.4 Appearance width score 5 Table 2.
Table 2 Appearance multiplication score table
Point difference
End time non-point
Part to short point
Including floating and shallow
Information:
0. 3 era- ? em
2m above 15m
fli u.3 en.- 3 cm
(2) 2 cm to E--10 cm
14) Half call to
and F
T and below
more than 3%
are compared with the previous two. The monthly score is shown,
2 sections are used to make the environment. Ten points are shown
and one is listed together! The fast law rate of natural and 7 flat places is real "warp tree", limited country, etc. "" clear, so 2. Fill in the intention warp 0c.m, every 1>cm capital love score, weft to warp m to file
2 ratio item silk baking material 4 times the number of weft and potential convex price increase score, you half the width or less, use the establishment of each place according to the calculation of migration certificate guard, advance, light below the heart to you your car heart according to the choice # half evaluation.
Except for the edge of the infiltration of people near 1em not counted,
(T Wei Ke, Hua Ke positive land people than the high style width uneven with the same match within the most and most Hua place and seek the inner ratio of a calculation.
Yue control of the smooth coupon above, the whole direction length
with sequence 1 pass evenly divided
F7/T 43017—2003
Change point category
Excessive bad,
Grid board writing,
Extract small,
Braised noodles on the second floor
Twist, number
10G limit
and oil,
33 below
(1)0.5 below
(), white
and below
5.5.5 Appearance on the point score related instructions
Table 2 velvet)
also score! Limited hospital
board welcome change film number call score, sales shares into the big 5 and below not compared,
5.5.5,1 chase interest long standard with the direction or the most to the direction of the empty certificate 5.5.5.2
wrinkle in not pressed to not erotic color according to the score, 5.5.5.3
red dimension slightly has hair according to the appropriate score, recommended hair grant called obvious call score. 5.5.5. 4
accumulation of nuclear seal martial arts this will be obvious.
heart small return time water, the hand will be collected as a clear product. The whole blood is clear
through
the edge is u.1beLl
the stain resistance is up to 0.3 s,
the clear only management quantity
the filling device is above
the flower is more than 0. cm:
the pattern is late orange and above,
except for the following points, the points are not counted
the production number is 13,6, the main point, the color difference is recognized as H5C5 level according to the sound score, 3.4 the following items must be recorded and the diameter is 1cm and below, the highest diameter does not exceed 12, 5.5.5.5
5.5.5.6 superior products, the first-class products are not allowed to have broken words, rolling files, melting, river files, aluminum mixing and other serious symptoms. 5.5.5.7 Uncertain points will not be scored. 5.5.E.1 The number of each piece in the front row must be the same as that of the cabinet. 5.5.6.2 The average annual adjustment of the piece is 1UTi and below. It is not allowed to double the width once. The lower point of the standard can be extended by 10ml and the width can be increased by 10ml. The distance between the ends of the high-top standard and the standard point of the standard shall not be less than 1m:
6 Test method
6.1 The length shall be determined according to GB4666.
6.2 The width shall be determined according to G1<
6.3 Density determination is carried out according to GB/T13.
6.4 Mass determination is carried out according to GB/14569. 6.5 Determination of breaking elasticity is carried out according to GB/T3Q23.1. F2/T43017——2093
6.6 Washing rate is carried out according to G/TG/TG/T30, and the washing sequence is D method.
6.7 Washing rate 6.8 Determination of water resistance to negative half degree is carried out according to CB/T=?13. 6.9 Determination of color fastness is carried out according to 63/T7922. 6.10 Determination of color fastness is carried out according to G:3. 6.11 Determination of half-use is carried out according to method 4 of (B/T8427-108. 6.12 Determination of medium is carried out according to GH/T2912.1. 6.13 Determination of PTI value is carried out according to GB/T-7 573. The determination of the straightness of each filament shall be carried out in accordance with E2T01095-2002. 6.12
6.15 The determination of the elongation shall be carried out in accordance with FZ1062-. 6.16 The study of the rate of change shall be carried out in accordance with 7.6.1 of F2/10102-193: 5mi1 reading effect: 6.17 The inspection of the appearance points shall be carried out in accordance with 1.24 of (3/755521955): 7 inspection frequency
7.1 Inspection Inspection classification
Strong yarn: The quality inspection of spandex stretch yarn fabric is divided into factory inspection and type inspection. 7.2 Factory inspection
Strong yarn/spandex stretch yarn fabric factory must carry out factory inspection. 7.2.1 Inspection items
The inspection items are width, density, quality, breakage, color fastness and appearance quality in the standard requirements.
7. 2, 2 groups of batches
One service order or the same contract number is used as one inspection sign. When the number of inspection batches is large or the goods are shipped in installments, they can be inspected in batches separately.
7.2.3 Sampling
7.2.3.1 Width, thickness, and appearance quality are inspected piece by piece. 7.2.3.2 Internal quality inspection. According to G12826, the special inspection level is 52: the test should be 7.2.4 Determination of inspection results 7.2.4.1 Evaluation of appearance, quality, etc. according to product standards 7.2.4.7 Evaluation of internal quality according to product standards 7.2.4.3 Product quality certification according to appearance and internal quality 7.3 Type inspection The following are the types of inspections: The new product or product that has production restrictions is the formal production store, such as product structure, material, production technology, etc., which may affect the product performance; When reproducing normally: After a certain period of production or accumulation, a control inspection should be carried out at the same time; After a long period of production, the product should be restored to production! The inspection is expected to be more consistent with the last type inspection; b
FF/T 4351/-2003
) The national quality supervision agency will propose the requirement for type inspection. 7.3.1 Inspection items
The independent inspection items are the items to be determined in this standard. 7.3.2 Group batch
Line batch See 7.2.2,
7.3.3 Sampling
The sampling for type inspection shall be randomly selected from the qualified batch of products, and the width, density, appearance and pressure inspection shall be carried out according to the number of samples collected! /! 2%28 one-time oil plan, one inspection level 1 stipulates: internal quality inspection batch sampling, the number of oil samples shall be in accordance with (K/2%28 one-time sampling plan, special risk inspection level S-2 regulations. Person, 3.4 Determination of inspection results
The determination of qualified or unqualified shall be carried out in accordance with the tree specified in the sampling plan of "/T82 when AQL is 4.0". 7. 4 Re-inspection
7.4.1 If the delivery effect has objections to the inspection result, the effective party has the right to request a change of inspection. The re-inspection shall be based on the first time. 7.4.23 "Follow the provisions of this standard.
3 Packaging and marking
The packaging and marking of silk/hydrogen wheel strength fabrics shall be carried out in accordance with G/T15554 and H39, 4 provisions, 9 other
for product. Requirements, test methods. Position table and marking If there are other requirements, it can be executed according to the contract or agreement, 3
and point out
through Yao point
spa point
deep color
clam point, uneven
sulfur basis, egg
no damage will be given
Appendix A
[Normative Appendix]
Appearance point classification table
English point cup
FZ/T 4$C17—2003
Head, I give, point, group, production, hold, recruit, lack of Hong Kong, text, test, mouth, break wine, hand Xiao Du, Tian Si Yi, water limit total, Xiao Ya Song, point, fall, wide, urgent, Lan Er Xing, add harmony, cloth wear fast, multi-heart tower, exhaust path, double, egg group, Ying Qi, rise. Then, sound, wrinkle, new block, calcium dragon, exciting break board, jump school, mature years, Xingzao, car pox, section chain clean, belt drying, break pure, abandon knot lead line grain, practice to wing name, throw paper, effect, gray worry, drum discussion, color dragon, land bag fall, deep decision after song, head electric clean, five have decision elimination, edge color light, color wear drink classic wool Sticky season
Production must, width open, finger collection finger technique abandoned
Point reached, market reached, model title carrying edge, reached the front, let the edge, collection off supply, welcome the purchase not net. Reach less, count and line, etc.
cultivate both the limit end pulp, exciting color point stock diagram egg empty end door sand double belt, reject quality, fall color silk overlap version syndrome sub-print, profit print return print, three newspapers non-phase paint print, chemical rise, can rise, can syndrome break generation, coarse and fine, release war, according to the version depth method, prosperous package can not deep material shape fall, send book - head color small clear test, slope crack, technical situation, fixed fat, install question, school edge, the second fierce person guard! Also dead, money, Shantou dirty, test, good dirt, mold Pu, weak oil, white side, word liquid water method, etc. hair to broken head3.4 The following items must be recorded and certified: the diameter must be 1cm or less, the highest diameter must not exceed 12mm, 5.5.5.5
5.5.5.6 The first-class products are not allowed to have serious symptoms such as broken words, rolled gears, melted gears, river gears, aluminum mixing, etc. 5.5.5.7 Uncertain points will not be scored. 5.5.E The current standard for the opening and closing of the matching pattern is 5.5.E.1 The number of each row of matching pieces must be consistent. 5.5.6.2 The average annual adjustment of matching pieces is 1UTi or less, and it is not allowed to double once. The length of the lower point of the standard support can be (100ml) and the width of the standard is once again increased by 1, and the length of each standard is 10. The distance between the upper and lower points of the standard support and the end of the standard support shall not be less than 1m:
6 Test method
6.1 The length shall be determined according to GB4666.
6.2 The width shall be determined according to G1<
6.3 Density determination is carried out according to GB/T13.
6.4 Mass determination is carried out according to GB/14569. 6.5 Determination of breaking elasticity is carried out according to GB/T3Q23.1. F2/T43017——2093
6.6 Washing rate is carried out according to G/TG/TG/T30, and the washing sequence is D method.
6.7 Washing rate 6.8 Determination of water resistance to negative half degree is carried out according to CB/T=?13. 6.9 Determination of color fastness is carried out according to 63/T7922. 6.10 Determination of color fastness is carried out according to G:3. 6.11 Determination of half-use is carried out according to method 4 of (B/T8427-108. 6.12 Determination of medium is carried out according to GH/T2912.1. 6.13 Determination of PTI value is carried out according to GB/T-7 573. The determination of the straightness of each filament shall be carried out in accordance with E2T01095-2002. 6.12
6.15 The determination of the elongation shall be carried out in accordance with FZ1062-. 6.16 The study of the rate of change shall be carried out in accordance with 7.6.1 of F2/10102-193: 5mi1 reading effect: 6.17 The inspection of the appearance points shall be carried out in accordance with 1.24 of (3/755521955): 7 inspection frequency
7.1 Inspection Inspection classification
Strong yarn: The quality inspection of spandex stretch yarn fabric is divided into factory inspection and type inspection. 7.2 Factory inspection
Strong yarn/spandex stretch yarn fabric factory must carry out factory inspection. 7.2.1 Inspection items
The inspection items are width, density, quality, breakage, color fastness and appearance quality in the standard requirements.
7. 2, 2 groups of batches
One service order or the same contract number is used as one inspection sign. When the number of inspection batches is large or the goods are shipped in installments, they can be inspected in batches separately.
7.2.3 Sampling
7.2.3.1 Width, thickness, and appearance quality are inspected piece by piece. 7.2.3.2 Internal quality inspection. According to G12826, the special inspection level is 52: the test should be 7.2.4 Determination of inspection results 7.2.4.1 Evaluation of appearance, quality, etc. according to product standards 7.2.4.7 Evaluation of internal quality according to product standards 7.2.4.3 Product quality certification according to appearance and internal quality 7.3 Type inspection The following are the types of inspections: The new product or product that has production restrictions is the formal production store, such as product structure, material, production technology, etc., which may affect the product performance; When reproducing normally: After a certain period of production or accumulation, a control inspection should be carried out at the same time; After a long period of production, the product should be restored to production! The inspection is expected to be more consistent with the last type inspection; b
FF/T 4351/-2003
) The national quality supervision agency will propose the requirement for type inspection. 7.3.1 Inspection items
The independent inspection items are the items to be determined in this standard. 7.3.2 Group batch
Line batch See 7.2.2,
7.3.3 Sampling
The sampling for type inspection shall be randomly selected from the qualified batch of products, and the width, density, appearance and pressure inspection shall be carried out according to the number of samples collected! /! 2%28 one-time oil plan, one inspection level 1 stipulates: internal quality inspection batch sampling, the number of oil samples shall be in accordance with (K/2%28 one-time sampling plan, special risk inspection level S-2 regulations. Person, 3.4 Determination of inspection results
The determination of qualified or unqualified shall be carried out in accordance with the tree specified in the sampling plan of "/T82 when AQL is 4.0". 7. 4 Re-inspection
7.4.1 If the delivery effect has objections to the inspection result, the effective party has the right to request a change of inspection. The re-inspection shall be based on the first time. 7.4.23 "Follow the provisions of this standard.
3 Packaging and marking
The packaging and marking of silk/hydrogen wheel strength fabrics shall be carried out in accordance with G/T15554 and H39, 4 provisions, 9 other
for product. Requirements, test methods. Position table and marking If there are other requirements, it can be executed according to the contract or agreement, 3
and point out
through Yao point
spa point
deep color
clam point, uneven
sulfur basis, egg
no damage will be given
Appendix A
[Normative Appendix]
Appearance point classification table
English point cup
FZ/T 4$C17—2003
Head, I give, point, group, production, hold, recruit, lack of Hong Kong, text, test, mouth, break wine, hand Xiao Du, Tian Si Yi, water limit total, Xiao Ya Song, point, fall, wide, urgent, Lan Er Xing, add harmony, cloth wear fast, multi-heart tower, exhaust path, double, egg group, Ying Qi, rise. Then, sound, wrinkle, new block, calcium dragon, exciting break board, jump school, mature years, Xingzao, car pox, section chain clean, belt drying, break pure, abandon knot lead line grain, practice to wing name, throw paper, effect, gray worry, drum discussion, color dragon, land bag fall, deep decision after song, head electric clean, five have decision elimination, edge color light, color wear drink classic wool Sticky season
Production must, width open, finger collection finger technique abandoned
Point reached, market reached, model title carrying edge, reached the front, let the edge, collection off supply, welcome the purchase not net. Reach less, count and line, etc.
cultivate both the limit end pulp, exciting color point stock diagram egg empty end door sand double belt, reject quality, fall color silk overlap version syndrome sub-print, profit print return print, three newspapers non-phase paint print, chemical rise, can rise, can syndrome break generation, coarse and fine, release war, according to the version depth method, prosperous package can not deep material shape fall, send book - head color small clear test, slope crack, technical situation, fixed fat, install question, school edge, the second fierce person guard! Also dead, money, Shantou dirty, test, good dirt, mold Pu, weak oil, white side, word liquid water method, etc. hair to broken head3.4 The following items must be recorded and certified: the diameter must be 1cm or less, the highest diameter must not exceed 12mm, 5.5.5.5
5.5.5.6 The first-class products are not allowed to have serious symptoms such as broken words, rolled gears, melted gears, river gears, aluminum mixing, etc. 5.5.5.7 Uncertain points will not be scored. 5.5.E The current standard for the opening and closing of the matching pattern is 5.5.E.1 The number of each row of matching pieces must be consistent. 5.5.6.2 The average annual adjustment of matching pieces is 1UTi or less, and it is not allowed to double once. The length of the lower point of the standard support can be (100ml) and the width of the standard is once again increased by 1, and the length of each standard is 10. The distance between the upper and lower points of the standard support and the end of the standard support shall not be less than 1m:
6 Test method
6.1 The length shall be determined according to GB4666.
6.2 The width shall be determined according to G1<
6.3 Density determination is carried out according to GB/T13.
6.4 Mass determination is carried out according to GB/14569. 6.5 Determination of breaking elasticity is carried out according to GB/T3Q23.1. F2/T43017——2093
6.6 Washing rate is carried out according to G/TG/TG/T30, and the washing sequence is D method.
6.7 Washing rate 6.8 Determination of water resistance to negative half degree is carried out according to CB/T=?13. 6.9 Determination of color fastness is carried out according to 63/T7922. 6.10 Determination of color fastness is carried out according to G:3. 6.11 Determination of half-use is carried out according to method 4 of (B/T8427-108. 6.12 Determination of medium is carried out according to GH/T2912.1. 6.13 Determination of PTI value is carried out according to GB/T-7 573. The determination of the straightness of each filament shall be carried out in accordance with E2T01095-2002. 6.12
6.15 The determination of the elongation shall be carried out in accordance with FZ1062-. 6.16 The study of the rate of change shall be carried out in accordance with 7.6.1 of F2/10102-193: 5mi1 reading effect: 6.17 The inspection of the appearance points shall be carried out in accordance with 1.24 of (3/755521955): 7 inspection frequency
7.1 Inspection Inspection classification
Strong yarn: The quality inspection of spandex stretch yarn fabric is divided into factory inspection and type inspection. 7.2 Factory inspection
Strong yarn/spandex stretch yarn fabric factory must carry out factory inspection. 7.2.1 Inspection items
The inspection items are width, density, quality, breakage, color fastness and appearance quality in the standard requirements.
7. 2, 2 groups of batches
One service order or the same contract number is used as one inspection sign. When the number of inspection batches is large or the goods are shipped in installments, they can be inspected in batches separately.
7.2.3 Sampling
7.2.3.1 Width, thickness, and appearance quality are inspected piece by piece. 7.2.3.2 Internal quality inspection. According to G12826, the special inspection level is 52: the test should be 7.2.4 Determination of inspection results 7.2.4.1 Evaluation of appearance, quality, etc. according to product standards 7.2.4.7 Evaluation of internal quality according to product standards 7.2.4.3 Product quality certification according to appearance and internal quality 7.3 Type inspection The following are the types of inspections: The new product or product that has production restrictions is the formal production store, such as product structure, material, production technology, etc., which may affect the product performance; When reproducing normally: After a certain period of production or accumulation, a control inspection should be carried out at the same time; After a long period of production, the product should be restored to production! The inspection is expected to be more consistent with the last type inspection; b
FF/T 4351/-2003
) The national quality supervision agency will propose the requirement for type inspection. 7.3.1 Inspection items
The independent inspection items are the items to be determined in this standard. 7.3.2 Group batch
Line batch See 7.2.2,
7.3.3 Sampling
The sampling for type inspection shall be randomly selected from the qualified batch of products, and the width, density, appearance and pressure inspection shall be carried out according to the number of samples collected! /! 2%28 one-time oil plan, one inspection level 1 stipulates: internal quality inspection batch sampling, the number of oil samples shall be in accordance with (K/2%28 one-time sampling plan, special risk inspection level S-2 regulations. Person, 3.4 Determination of inspection results
The determination of qualified or unqualified shall be carried out in accordance with the tree specified in the sampling plan of "/T82 when AQL is 4.0". 7. 4 Re-inspection
7.4.1 If the delivery effect has objections to the inspection result, the effective party has the right to request a change of inspection. The re-inspection shall be based on the first time. 7.4.23 "Follow the provisions of this standard.
3 Packaging and marking
The packaging and marking of silk/hydrogen wheel strength fabrics shall be carried out in accordance with G/T15554 and H39, 4 provisions, 9 other
for product. Requirements, test methods. Position table and marking If there are other requirements, it can be executed according to the contract or agreement, 3
and point out
through Yao point
spa point
deep color
clam point, uneven
sulfur basis, egg
no damage will be given
Appendix A
[Normative Appendix]
Appearance point classification table
English point cup
FZ/T 4$C17—2003
Head, I give, point, group, production, hold, recruit, lack of Hong Kong, text, test, mouth, break wine, hand Xiao Du, Tian Si Yi, water limit total, Xiao Ya Song, point, fall, wide, urgent, Lan Er Xing, add harmony, cloth wear fast, multi-heart tower, exhaust path, double, egg group, Ying Qi, rise. Then, sound, wrinkle, new block, calcium dragon, exciting break board, jump school, mature years, Xingzao, car pox, section chain clean, belt drying, break pure, abandon knot lead line grain, practice to wing name, throw paper, effect, gray worry, drum discussion, color dragon, land bag fall, deep decision after song, head electric clean, five have decision elimination, edge color light, color wear drink classic wool Sticky season
Production must, width open, finger collection finger technique abandoned
Point reached, market reached, model title carrying edge, reached the front, let the edge, collection off supply, welcome the purchase not net. Reach less, count and line, etc.
cultivate both the limit end pulp, exciting color point stock diagram egg empty end door sand double belt, reject quality, fall color silk overlap version syndrome sub-print, profit print return print, three newspapers non-phase paint print, chemical rise, can rise, can syndrome break generation, coarse and fine, release war, according to the version depth method, prosperous package can not deep material shape fall, send book - head color small clear test, slope crack, technical situation, fixed fat, install question, school edge, the second fierce person guard! Also dead, money, Shantou dirty, test, good dirt, mold Pu, weak oil, white side, word liquid water method, etc. hair to broken head1 Operation: 5mi1 Reading effect: 6.17 Inspection of appearance points (3/755521955) 1.24: 7 Inspection frequency
7.1 Inspection classification
Strong yarn: The quality inspection of spandex stretch yarn fabric is divided into factory inspection and type inspection. 7.2 Factory inspection
Polyester/spandex stretch yarn fabric factory must conduct factory inspection. 7.2.1 Inspection items
Inspection items include width, density, quality, breakage, water and water content, color fastness, color fastness and appearance quality.
7. 2, 2 groups of batches
One service order or the same contract number is used as one inspection batch. When the number of inspection batches is large or the goods are delivered in installments, they can be inspected in batches separately.
7.2.3 Sampling
7.2.3.1 Width, thickness, and appearance quality are inspected piece by piece. 7.2.3.2 Internal quality inspection. According to G12826, the sampling point is used once. The special inspection level is determined as follows: the test should be based on the machine loss in the inspection batch.
7.2.4 Determination of inspection results
7.2.4.1 Width, thickness, and appearance quality are provided according to the product quality. 7.2.4.7 Product standards require long-term evaluation, criticism, etc. 7.2.4.3 Product standards require internal evaluation, criticism, etc. 7.3 Type inspection
There are the following: New production stations or products with production restrictions are formal production stores, such as product structure, materials, production technology has a relatively large number of people, which may affect the performance of the product; e! When normal production stops: After a certain period of production or accumulation, a retrograde control inspection should be carried out; After a long period of production, the product should resume production and have a relatively large proportion of the last type inspection; b
FF/T 4351/—2003
) When the national quality supervision agency proposes the requirement for type inspection. 7.3.1 Inspection Items
The single inspection items are the items to be determined in this standard. 7.3.2 Group Batch
See 7.2.2 for line batch.
7.3.3 Sampling
The sampling for type inspection shall be randomly selected from the qualified batch of products. The number of samples for width, density and appearance inspection shall be in accordance with the one-time sampling scheme of /! 2%28. The number of samples for internal quality inspection shall be in accordance with the one-time sampling scheme of (K/2%28). The number of samples for special inspection level S-2 shall be implemented. 3.4 Judgment of inspection results
The judgment of qualified or unqualified shall be in accordance with the determination of the sampling scheme of /T82 when AQL is 4.0. 7. 4 Re-inspection
7.4.1 If the delivery party has any objection to the inspection result, the delivery party has the right to request a re-inspection. The re-inspection shall be based on one time. 7.4.23 "Perform in accordance with the provisions of this standard.
3 Packaging and marking
The packaging and marking of silk/hydrogen wheel strength fabrics shall be carried out in accordance with G/T15554 and H39, 4, 9 other
Product requirements, test methods, position table and marking If there are other requirements, it can be executed according to the contract or agreement, 3
and point out
through Yao point
spa point
deep color
clam point, uneven
sulfur basis, egg
no damage will be given
Appendix A
[Normative Appendix]
Appearance point classification table
English point cup
FZ/T 4$C17—2003
Head, I give, point, group, production, hold, recruit, lack of Hong Kong, text, test, mouth, break wine, hand Xiao Du, Tian Si Yi, water limit total, Xiao Ya Song, point, fall, wide, urgent, Lan Er Xing, add harmony, cloth wear fast, multi-heart tower, exhaust path, double, egg group, Ying Qi, rise. Then, sound, wrinkle, new block, calcium dragon, exciting break board, jump school, mature years, Xingzao, car pox, section chain clean, belt drying, break pure, abandon knot lead line grain, practice to wing name, throw paper, effect, gray worry, drum discussion, color dragon, land bag fall, deep decision after song, head electric clean, five have decision elimination, edge color light, color wear drink classic wool Sticky season
Production must, width open, finger collection finger technique abandoned
Point reached, market reached, model title carrying edge, reached the front, let the edge, collection off supply, welcome the purchase not net. Reach less, count and line, etc.
cultivate both the limit end pulp, exciting color point stock diagram egg empty end door sand double belt, reject quality, fall color silk overlap version syndrome sub-print, profit print return print, three newspapers non-phase paint print, chemical rise, can rise, can syndrome break generation, coarse and fine, release war, according to the version depth method, prosperous package can not deep material shape fall, send book - head color small clear test, slope crack, technical situation, fixed fat, install question, school edge, the second fierce person guard! Also dead, money, Shantou dirty, test, good dirt, mold Pu, weak oil, white side, word liquid water method, etc. hair to broken head1 Operation: 5mi1 Reading effect: 6.17 Inspection of appearance points (3/755521955) 1.24: 7 Inspection frequency
7.1 Inspection classification
Strong yarn: The quality inspection of spandex stretch yarn fabric is divided into factory inspection and type inspection. 7.2 Factory inspection
Polyester/spandex stretch yarn fabric factory must conduct factory inspection. 7.2.1 Inspection items
Inspection items include width, density, quality, breakage, water and water content, color fastness, color fastness and appearance quality.
7. 2, 2 groups of batches
One service order or the same contract number is used as one inspection batch. When the number of inspection batches is large or the goods are delivered in installments, they can be inspected in batches separately.
7.2.3 Sampling
7.2.3.1 Width, thickness, and appearance quality are inspected piece by piece. 7.2.3.2 Internal quality inspection. According to G12826, the sampling point is used once. The special inspection level is determined as follows: the test should be based on the machine loss in the inspection batch.
7.2.4 Determination of inspection results
7.2.4.1 Width, thickness, and appearance quality are provided according to the product quality. 7.2.4.7 Product standards require long-term evaluation, criticism, etc. 7.2.4.3 Product standards require internal evaluation, criticism, etc. 7.3 Type inspection
There are the following: New production stations or products with production restrictions are formal production stores, such as product structure, materials, production technology has a relatively large number of people, which may affect the performance of the product; e! When normal production stops: After a certain period of production or accumulation, a retrograde control inspection should be carried out; After a long period of production, the product should resume production and have a relatively large proportion of the last type inspection; b
FF/T 4351/—2003
) When the national quality supervision agency proposes the requirement for type inspection. 7.3.1 Inspection Items
The single inspection items are the items to be determined in this standard. 7.3.2 Group Batch
See 7.2.2 for line batch.
7.3.3 Sampling
The sampling for type inspection shall be randomly selected from the qualified batch of products. The number of samples for width, density and appearance inspection shall be in accordance with the one-time sampling scheme of /! 2%28. The number of samples for internal quality inspection shall be in accordance with the one-time sampling scheme of (K/2%28). The number of samples for special inspection level S-2 shall be implemented. 3.4 Judgment of inspection results
The judgment of qualified or unqualified shall be in accordance with the determination of the sampling scheme of /T82 when AQL is 4.0. 7. 4 Re-inspection
7.4.1 If the delivery party has any objection to the inspection result, the delivery party has the right to request a re-inspection. The re-inspection shall be based on one time. 7.4.23 "Perform in accordance with the provisions of this standard.
3 Packaging and marking
The packaging and marking of silk/hydrogen wheel strength fabrics shall be carried out in accordance with G/T15554 and H39, 4, 9 other
Product requirements, test methods, position table and marking If there are other requirements, it can be executed according to the contract or agreement, 3
and point out
through Yao point
spa point
deep colorbZxz.net
clam point, uneven
sulfur basis, egg
no damage will be given
Appendix A
[Normative Appendix]
Appearance point classification table
English point cup
FZ/T 4$C17—2003
Head, I give, point, group, production, hold, recruit, lack of Hong Kong, text, test, mouth, break wine, hand Xiao Du, Tian Si Yi, water limit total, Xiao Ya Song, point, fall, wide, urgent, Lan Er Xing, add harmony, cloth wear fast, multi-heart tower, exhaust path, double, egg group, Ying Qi, rise. Then, sound, wrinkle, new block, calcium dragon, exciting break board, jump school, mature years, Xingzao, car pox, section chain clean, belt drying, break pure, abandon knot lead line grain, practice to wing name, throw paper, effect, gray worry, drum discussion, color dragon, land bag fall, deep decision after song, head electric clean, five have decision elimination, edge color light, color wear drink classic wool Sticky season
Production must, width open, finger collection finger technique abandoned
Point reached, market reached, model title carrying edge, reached the front, let the edge, collection off supply, welcome the purchase not net. Reach less, count and line, etc.
cultivate both the limit end pulp, exciting color point stock diagram egg empty end door sand double belt, reject quality, fall color silk overlap version syndrome sub-print, profit print return print, three newspapers non-phase paint print, chemical rise, can rise, can syndrome break generation, coarse and fine, release war, according to the version depth method, prosperous package can not deep material shape fall, send book - head color small clear test, slope crack, technical situation, fixed fat, install question, school edge, the second fierce person guard! Also dead, money, Shantou dirty, test, good dirt, mold Pu, weak oil, white side, word liquid water method, etc. hair to broken headHowever, the sound of the classics, wrinkles, prints, new blocks, calcium dragons, exciting broken boards, skipping schools, mature years, building, car pox, chain clean, belt drying, broken pure, abandoned knot lead line grain, practice to the wing of the name, throw paper, effect, gray worry, drum discussion of the people, color dragon, the ground bag down me, after the song deep decision, head electric clean, five have decision to eliminate, edge color light, color wear drink classic hair sticky season
production to open, finger collection finger technique abandoned
point reached, city reached, model question carried edge, Reach the front, let the edge, collect the supply, welcome the purchase of net. Reach less, count and line, etc. || tt || cultivation has limited end pulp, exciting color point stock diagram egg empty end door sand double belt, rejection quality, color silk overlap version syndrome sub-print, profit printing return print, three newspapers non-phase paint printing, chemical rise, can rise, can syndrome break, coarse and fine, release war, according to the version depth method, prosperous package can not deep material shape fall, send book - head color small clear test, slope crack, technical situation, fixed fat, install question, school edge, the second fierce person guard! Also dead, money, Shantou dirty, test, good dirt, mold Pu, weak oil, white side, word liquid water method, etc. hair to broken headHowever, the sound of the classics, wrinkles, prints, new blocks, calcium dragons, exciting broken boards, skipping schools, mature years, building, car pox, chain clean, belt drying, broken pure, abandoned knot lead line grain, practice to the wing of the name, throw paper, effect, gray worry, drum discussion of the people, color dragon, the ground bag down me, after the song deep decision, head electric clean, five have decision to eliminate, edge color light, color wear drink classic hair sticky season
production to open, finger collection finger technique abandoned
point reached, city reached, model question carried edge, Reach the front, let the edge, collect the supply, welcome the purchase of net. Reach less, count and line, etc. || tt || cultivation has limited end pulp, exciting color point stock diagram egg empty end door sand double belt, rejection quality, color silk overlap version syndrome sub-print, profit printing return print, three newspapers non-phase paint printing, chemical rise, can rise, can syndrome break, coarse and fine, release war, according to the version depth method, prosperous package can not deep material shape fall, send book - head color small clear test, slope crack, technical situation, fixed fat, install question, school edge, the second fierce person guard! Also dead, money, Shantou dirty, test, good dirt, mold Pu, weak oil, white side, word liquid water method, etc. hair to broken head
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.